• 한국지진공학회논문집
• /
• 제12권2호
• /
• pp.9-22
• /
• 2008

이 논문에서는 구조물의 내진성능 향상을 위한 방법으로서 구조부재 및 수동형 감쇠기의 통합최적설계기법을 제시한다. 이는 구조부재 및 감쇠기의 최적배치를 다루는 최적화기법이다. 통합시스템의 최적설계를 위하여 다목적최적화기법을 도입하고, 이를 보다 효율적으로 다루기 위하여 목표신뢰성 제한조건을 갖는 다목적최적화문제로 재구성하였다. 수치해석 예제를 통하여 다양한Pareto 최적해를 제시하였으며, 이들이 기존 설계방법에 상응하는 순차적 설계방법 및 가중합방법에 따른 단일목적함수 최적화방법을 포괄함을 검증하였다. 여러 Pareto 최적해로부터 강성 및 감쇠장치의 사용량을 달리하는 3가지 대표설계안을 선택하고 이들의 내진성능을 다양한 지진하중에 대하여 비교 분석하였다. 이로부터 제시하는 방법이 구조물의 내진성능 향상을 위한 설계방법으로서 효율적으로 적용될 수 있을 것으로 기대된다.

• 조명전기설비학회논문지
• /
• 제23권7호
• /
• pp.29-40
• /
• 2009

This paper proposes a modeling and controller design approach for a hybrid wind power generation system that considers a fixed wind-turbine and a dump load. Since operating conditions are kept changing, it is challenge to design a control for reliable operation of the overall system To consider variable operating conditions, Takagi-Sugeno (TS) fuzzy model is taken into account to represent time-varying system by expressing the local dynamics of a nonlinear system through sub-systems, partitioned by linguistic rules. Also, each fuzzy model has uncertainty. Thus, in this paper, a modem nonlinear control design technique, the sliding mode nonlinear control design, is utilized for robust control mechanism In the simulation study, the proposed controller is compared with a proportional-integral (PI) controller. Simulation results show that the proposed controller is more effective against disturbances caused by wind speed and load variation than the PI controller, and thus it contributes to a better quality wind-hybrid power generation system.

• 한국지진공학회논문집
• /
• 제8권4호
• /
• pp.51-62
• /
• 2004

사장교의 지진응답 제어를 위한 퍼지관리제어기법에 대하여 연구하였다. 제시하는 방법은 복합제어방법의 하나로서, 여러 개의 최적제어기로 이루어진 하부제어기와 퍼지관리자로 구성되는 계층적인 구조를 가진다. 하위제어기들은 사장교의 주요 지진응답들을 저감시키도록 각각 독립적으로 설계되며, 퍼지관리자는 설계된 하위제어기들의 참여율을 조절함으로써 향상된 제진성능을 확보한다. 이는 하위제어기의 정적 제어이득을 퍼지추론과정에 기반하여 실시간으로 변화하는 동적 제어이득으로 변화함으로써 이루어진다. 제안하는 방법으리 적용성을 평가하기 위하여 Dyke 등이 제안한 사장교의 벤치마크 제어문제를 설계 예로 고려하였으며, 사장교 지진응답제어를 위한 제어변수로는 주탑하부의 전단력과 휨모멘트, 주탑상부의 수평변위 및 테크 주탑간 상대변위, 그리고 케이블의 장력을 선정하였다. 벤치마크 사장교에 대하여 제안한 퍼지관리제어기 및 최적제어이론에 기반한 LQG 제어기의 제어성능 비교로부터 제시하는 기법의 효율성을 검증하였다.

• KIEE International Transaction on Systems and Control
• /
• 제2D권2호
• /
• pp.53-58
• /
• 2002

In this paper, various aspects in magnetoencephalography (MEG) source localization are studied. To minimize the errors in experimental data, an approximation technique using a polynomial function is proposed. The simulation shows that the proposed technique yields more accurate results. To improve the convergence characteristics in the optimization algorithm, a hybrid algorithm of evolution strategy and sensitivity analysis is applied to the neuromagnetic inverse problem. The effectiveness of the hybrid algorithm is verified by comparison with conventional algorithms. In addition, an artificial neural network (ANN) is applied to find an initial source location quickly and accurately. The simulation indicates that the proposed technique yields more accurate results effectively.

• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.146-157
• /
• 2019

The inverter is an essential part of permanent magnet synchronous motor (PMSM) drive systems. The performance of an inverter is greatly influenced by its modulation strategy. Using a proper management of modulation strategies can guarantee high performance from a PMSM under various speed conditions. Switching between modulations is a pivotal technique that determines the performance of a PMSM. Most works on hybrid methods focus on two-level induction motors drive systems. In this paper, in order to improve the performance of PMSMs under various speed conditions, a hybrid method of a pulse width modulation (PWM) control scheme based on a neutral-point-clamped (NPC) three level topology was proposed. This hybrid PWM modulation comprised space vector PWM (SVPWM) and selective harmonic elimination PWM (SHEPWM). Under low speed conditions, the SVPWM is employed to cause the PMSM to start smoothly, and to obtain a rapid response from the control system. Under high speed conditions, the SHEPWM is employed to reduce the switching frequency and to eliminate particular current harmonics. Moreover, the harmonic characteristics of different modulations are analyzed to obtain a smooth transition between the SHEPWM and the SVPWM. Experimental and simulation results indicated the effectiveness of the proposed control method.

• 한국지진공학회논문집
• /
• 제7권5호
• /
• pp.93-102
• /
• 2003

이 연구에서는 지진하중을 받는 빌딩구조물에 대한 복합구조제어시스템의 최적설계방법을 제시한다. 복합구조제어시스템의 설계는 구조물의 부재뿐만 아니라 수동제어시스템 및 능동제어시스템의 용량 및 위치 최적화 과정으로 정의된다. 최적설계는 이 연구에서 제안된 다단계 목표계획법(Multi-Stage Goal Programming)을 이용하여 최적화문제를 정식화하고 목표갱신 유전자알고리즘(Goal-Updating Genetic Algorithm을 적용하여 합리적인 최적화를 진행해가는 과정으로 구성된다. 다단계 목표계획법에서는 구조물의 층간 상대변위와 제어시스템의 용량에 대한 설계목표를 여러 단계로 선정하고, 각 물리량과 설계목표간의 정규화된 거리 합으로서 목적함수를 정의한다. 목표갱신 유전자알고리즘은 각 단계별 설계목표를 만족하는 최적해를 검색하고, 현 단계의 모든 설계목표를 만족하는 최적해가 존재할 경우 설계목표를 순차적으로 갱신함으로써 보다 상위수준의 설계목표로 접근해 나아간다. 지진하중을 받는 9층의 빌딩구조물에 대한 수치 예를 통하여 복합구조제어시스템의 통합최적설계 과정을 기술하였고, 구조부재, 수동 및 능동제어시스템이 균등분포된 구조물과 최적 설계결과를 비교하여 제시하는 방법의 효율성을 검증하였다.

• 제어로봇시스템학회논문지
• /
• 제8권12호
• /
• pp.1048-1055
• /
• 2002

The problem of generating torch paths for 2D laser cutting of a stock plate nested with a set of free-formed parts is investigated. The objective is to minimize the total length of the torch path starting from a blown depot, then visiting all the given Parts, and retuning back to the depot. A torch Path consists of the depot and Piercing Points each of which is to be specified for cutting a part. The torch path optimization problem is shown to be formulated as an extended version of the standard travelling salesman problem To solve the problem, a hybrid genetic algorithm is proposed. In order to improve the speed of evolution convergence, the algorithm employs a genetic algorithm for global search and a combination of an optimization technique and a genetic algorithm for local optimization. Traditional genetic operators developed for continuous optimization problems are used to effectively deal with the continuous nature of piercing point positions. Computational results are provided to illustrate the validity of the proposed algorithm.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권2호
• /
• pp.91-97
• /
• 2012

This paper presents a state space model of a two quadrant chopper and PWM inverter-fed Interior Permanent Magnet Synchronous Motor (IPMSM) drive system and its application to hybrid vehicles. The drive system has two different state equations for motoring and regenerating action. This paper presents a common state equation by using State Space Averaging method. Using this model of the IPMSM drive system, detailed simulation and controller design of the drive system, including PWM inverter switching, are given. The validity of this model and usefulness, according to a comparison among Maximum Torque/Ampere control, Maximum Torque/Flux control, and Maximum Efficiency optimization, are confirmed from simulation results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.149-151
• /
• 2009

Hybrid electric vehicle has three operating mode, depending on the operation of the engine and electric motor. According to the speed range of BLDC motor, In hybrid traction mode, both the engine and electric motor deliver to drive train. Battery charge mode, the electric motor operates as generator and is driven by the engine to charge the batteries. In engine alone traction mode, the electric motor is do-energized, and vehicle is propelled by the engine alone. we propose hysteresis current control technique to maintain constant speed in the motor load torque at the reverse direction. The proposed method is verified by using Matlab Simulink software.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권9호
• /
• pp.531-538
• /
• 2005

This paper proposes an expert system which is able to enhance the accuracy and productivity by determining the test strategy based on heuristic rules for test of the hybrid electronic circuit board producted massively in production line. The test heuristic rules are obtained from test system designer, test experts and experimental results. The guarding method separating the tested device with circumference circuit of the device is adopted to enhance the accuracy of measurements in the test of analog devices. This guarding method can reduce the error occurring due to the voltage drop in both the signal input line and the measuring line by utilizing heuristic rules considering the device impedance and the parallel impedance. Also, PSA(Parallel Signature Analysis) technique Is applied for test of the digital devices and circuits. In the PSA technique, the real-time test of the high integrated device is possible by minimizing the test time forcing n bit output stream from the tested device to LFSR continuously. It is implemented in Visual C++ computer language for the purpose of the implementation of the inference engine using the dynamic memory allocation technique, the interface with the electronic circuit database and the hardware direct control. Finally, the effectiveness of the builded expert system is proved by simulating the several faults occurring in the mounting process the electronic devices to the surface of PCB for a typical hybrid electronic board and by identifying the results.