• Korean Institute of Interior Design Journal
• /
• v.18 no.4
• /
• pp.71-78
• /
• 2009

This study analyzed the observation characteristics on space by analyzing through the visual perception experiment to the image dates from the original space and the rotated space of it. The results of this study are as fellow as: First, most frequently observed points were, lower end mainly from the center was more observed in the original space while upper end mainly from the center was more observed in the rotated space. Therefore, it is able for us to learn whether the space has the same design, the length of time focusing on one point differentiates as the image rotates. Second, differentiation in observation part, as shown in the case study, can be seen as a consequence of changes in perspective composition. The test indicates that when a design is presented to an observer, the observer's examining point would vary according to where the indoor perspective drawing places a vanishing point. Third, in zones I and II, observation was focused on lower end in the original picture while on the rotated picture there were more focus on the upper end and perpendicularity view of the indoor. Fourth, this study analyzed the mean value of the observation part. As one method wants to see how to change the observation characteristics by rotating the original space, few deviation from the mean value will be interpret to have similar observation characteristics over all even if it has the differences of watching place by rotated space.

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.3
• /
• pp.110-117
• /
• 2018

The development of prosthetic hand or prosthetic leg equipment is steadily taking place globally. Though it would be difficult to create or feel the same way as a human hand, it would be a great for the amputated person if they can pick things up or do some movement as they want. It has become possible to develop low-cost prosthetic hand according to development of 3D printing technology. If people can develop personalized prosthetic equipment at similar prices to meet this trend, the utilization and penetration rate will be much higher. In this study, it describes how to develop a user-customizable prosthetic hand using 3D printing. To do this, the transformational parameters of prosthetic hand shape modeling are extracted as variability values, and the functions for controlling prosthetic hand motion are designed as software design patterns. This allows people who need a prosthetic hand to have their own prosthetic hand at a fast and affordable price.

• Cartoon and Animation Studies
• /
• s.49
• /
• pp.537-561
• /
• 2017

Machines and robotic structures are questioning existential bases of human beings. They influence our way of thinking and transform our social philosophies and value systems. The same time they keep their fascination ever since. Mechanical technique and skills are symbols for development and hazard at the same time. The attraction of this ambivalence is reviewed in this thesis by having a look at kinetic elements in modern sculpture. The author is focusing on classical sculptural positions that use machines or machinery within sculptural artworks. The historical development is examined and certain examples from the classical modern era are discussed as role models during their time. On this scenario, the portraits of two young contemporary outstanding positions in the field of kinetic art and installation are analyzed and explained. One of the goals was to investigate the eastern and the western language of two artists that are doing artworks in the same field and compare the works and the cultural expressions to each other. Different cultural positions and visual languages become visible due to the research. And the author's final conclusions is, that even in a globalized world there will always be significant local distinguishes remaining.

• Journal of Biomedical Engineering Research
• /
• v.30 no.6
• /
• pp.469-475
• /
• 2009

Diseases caused by indurate tissues of the internal organs are liver cirrhosis and abdominal sclerosis. The cause of chronic gastro-intestinal disease is a digestive system disorder and a defecation disorder. They impede peristaltic movement and digestive system with the symptom that indurate tissues. The purpose of the present study was to determine the disease grade quantitatively by measuring an indurated standard of tissues and organs. For the measurement of elasticity, we designed the system that measure the displacement of the substance and approved pressure using ultrasound transducer. For verification of developed system, we compared elasticity as results of experiment between the developed system and public elasticity measurement machine at individual plastic phantoms made by plastic hardener and softener. Elasticity of the plastic phantoms is averagely 0.007MPa lower measured by developed system than Micro-indenter, and less than 10% errors. Comparing with economical value and accuracy between developed system and Micro-indenter, the system is significant of measurement for tissue elasticity. Thus, it is possible to measure a elasticity at human tissue and organ. A chronic gastro-disease as well as grade could be decided objective validity using this system.

• Journal of Technology Innovation
• /
• v.8 no.2
• /
• pp.19-65
• /
• 2000

This study analyzes the development of technological infrastructure(TI) and technological infrastructure policy(TIP) to enhance the technological capabilities of small and mid-sized manufacturing enterprises(SMEs) in the U.S. and Korea in terms of the technological system(TS) concept, which is composed of technological infrastructure, industrial organization, and institutional infrastructure. In order to analyze the internal dynamics of the system, such as incentive mechanisms, the interaction among economic actors, and the policy implementation process, we compare the MEP(Manufacturing Extension Partnership) system of the U.S. and the Joong-Jin-Gong system of Korea. Among many similarities, contrasts, and insights from each country's effort to construct TI and TS, the main findings are as follows. (1) Both the MEP system and the Joong-Jin-Cong system are TI-led or government-led type TS. However, the nation-wide picture is different: in the U.S., most TSs including the MEP system., are classified as TI-led type; in Korea, many TI-assisted or private sector-led TSs have been developed since the early 1960s. (2) the MEP system, as a representative case of the U.S., is less stable than the Joong-Jin-Gong system of Korea in terms of financing and political cycle. (3) The MEP system is a more complex and cooperative network than the Joong-Jin-Gong system. NIST, as a critical mass, generates the system, bridges various institutions, and influences the development of the system by providing funding. (4) Regarding TI components, TSs in both countries focus on utilizing off-the-shelf technologies rather than advanced technologies. However, the direction of movement is different: in the U.S., TSs have come to emphasize existing technologies to counterbalance an innovation system that has been highly focused toward new technologies; in Korea, TSs have been moving from focusing on a higher diffusion rate of imported process technologies to stressing new technology development. (5) Personnel and staffing, embodying technological capability, is an important concern in both countries. But the human capital infrastructure of the U.S. system is more efficient and industry-oriented than that of the Korean system due to a more flexible labor market. (6) While the U.S. has a strong tradition of state and local autonomy in constructing TI and TS to fit SMEs's specific need, Korea has a centralized and bureaucratically-led policy implementation process.

• Parasites, Hosts and Diseases
• /
• v.51 no.3
• /
• pp.343-347
• /
• 2013

Autochthonous human gnathostomiasis had never been reported in the Republic of Korea. We report here a case of Gnathostoma spinigerum infection in a 32-year-old Korean woman, presumed to have been infected via an indigenous route. The patient had experienced a painful migratory swelling near the left nasolabial fold area of the face for a year, with movement of the swelling to the mucosal area of the upper lip 2 weeks before surgical removal of the lesion. Histopathological examinations of the extracted tissue revealed inflammation with heavy eosinophilic infiltrations and sections of a nematode suggestive of a Gnathostoma sp. larva. The larva characteristically revealed about 25 intestinal cells with multiple (3-6) nuclei in each intestinal cell consistent with the 3rd-stage larva of G. spinigerum. The patient did not have any special history of travel abroad except a recent trip, 4 months before surgery, to China where she ate only cooked food. The patient is the first recorded autochthonous case of G. spinigerum infection in Korea.

• Journal of Plant Biotechnology
• /
• v.5 no.1
• /
• pp.13-17
• /
• 2003

Biotechnology is certainly one of the major landmarks in the 20th century history of science. It may produce enormous utility to human beings, but at the same time, it carries huge potential risks to the environment and public health. Thus, with a view to securing safety for the environment and public health in relation to the development and use of living modified organisms (LMOs), the Cartagena Protocol on Biosafety was adopted, in which a regulation Procedure as to the transboundary movements, transportation, handling, and use of LMOs were drawn up. In order to prepare for the entry into force of the Protocol, the Republic of Korea legislated the "Act on the Transboundary Movements of living modified organisms(hereinafter referred as the 'Act')" in Mar 2001, and has pre-announced the enactments of the enforcement ordinance and the enforcement regulation to the Act. Pursuant to the Act, the Ministry of Commerce, Industry and Energy, as a Competent National Authority, is making efforts to implement domestic biosafety schemes in cooperation with other bio-related government ministries. In order for these efforts to reap fruits, industry, academia, and research institutions should cooperate with one another, and civic groups and NGOs should narrow the differences in opinions and timely respond to the fast-changing situations. Focusing on the precautionary principle, the Protocol puts a great emphasis on the importance of information sharing amongst countries, and the Act also follows this principle. In order to gurantee biosafety, countries around the world, including the ROK, agreed to establish National Biosafety Clearing, designed to provide the information on the export/import of LMOs, R'||'&'||'Ds, risk assessment, safety control, etc. and register it on the CBD Central Biosafety Clearing House.e.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.4
• /
• pp.345-354
• /
• 2014

In this paper, we propose a real-time algorithm for estimating the relative position and velocity of a person with respect to a robot using a Kinect sensor and an extended Kalman filter (EKF). Additionally, we propose an algorithm for controlling the robot in the proximity of a person in a variety of modes. The algorithm detects the head and shoulder regions of the person using a histogram of oriented gradients (HOG) and a support vector machine (SVM). The EKF algorithm estimates the relative positions and velocities of the person with respect to the robot using data acquired by a Kinect sensor. We tested the various modes of proximity movement for a human in indoor situations. The accuracy of the algorithm was verified using a motion capture system.

• Fashion & Textile Research Journal
• /
• v.14 no.1
• /
• pp.109-121
• /
• 2012

This study aims at developing ergonomics patterns for the sleeve of structural firefighting protective clothing through 3D motion analysis in order to ensure efficiency and safety of firefighters who are exposed to harmful environment at work. A new research pattern was developed by applying the total results of 3D motion analysis, changes of body surface length measurements, and 2D data on 3D body shape analysis on the size 3 patterns of the existing coat sleeve. For the sleeves, we used the body surface length of the range of shoulder's flexion and the joint angle of the range of wrist's ulnar deviation. And for the production of structural firefighting protective clothing using the research pattern, we recruited a recognized producer of structural firefighting protective clothing designated by KFI. Unlike everyday clothes, structural firefighting protective clothing should be able to fully protect the wearers from the harmful environment that threatens their lives and should not cause any restrictions on their movement. Therefore, the focus of research and development of such protective clothing should be placed on consistent development of new technologies and production methods that will provide protection and comfort for the wearer rather than production cost reduction or operational efficiency. This study is meaningful as it applied 3D motion analysis instead of the existing methods to develop the patterns. In particular, since 3D motion analysis enables the measurement of the range of motion, there should be continuous research on the development of ergonomics patterns that consider workers' range of motion.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.2 s.46
• /
• pp.21-28
• /
• 2007

The facial modeling and animation technology had been studied in computer graphics field. The facial modeling technology is utilized much in virtual reality research purpose of MPEG-4 and so on and movie, advertisement, industry field of game and so on. Therefore, the development of 3D facial model that can do interaction with human is essential to little more realistic interface. We developed realistic and convenient 3D facial modeling system that using a optional facial image only. This system allows easily fitting to optional facial image by using the Korean standard facial model (generic model). So it generates intuitively 3D facial model as controling control points elastically after fitting control points on the generic model wire to the optional facial image. We can confirm and modify the 3D facial model by movement, magnify, reduce and turning. We experimented with 30 facial images of $630{\times}630$ sizes to verify usefulness of system that developed.