• 대한원격탐사학회지
• /
• 제28권2호
• /
• pp.203-214
• /
• 2012

콘크리트와 아스팔트가 상당 부분을 차지하는 도시의 물리적인 환경은 도시열섬효과를 일으키는 주요 원인이며, 일차적으로 토지이용 또는 토양피복에 따른 지표면온도의 상승으로 나타난다. 본 연구에서는 도시의 토지피복유형이 지표면온도에 미치는 영향을 공간해상도가 다른 MODIS, Landsat ETM+과 RapidEye 위성영상을 사용하여 비교 분석해 보았다. 연구대상지인 일산 신도시지역의 지표면온도는 토지 이용에 따라 뚜렷이 구분되는 패턴을 보여주었는데 건폐율이 높은 저층단독주택지구보다 건폐율이 낮고 녹지율이 높은 고층 아파트단지의 지표면온도가 현저히 낮게 나타났다. 토지피복유형과의 관계는 건물이나 도로 등 도시화지역의 면적이 증가할수록 기후존의 지표면온도가 증가하고, 식생과 수면, 그림자 지역의 면적이 늘어날수록 지표면온도는 떨어진다. NDVI와 지표면온도 사이에도 음의 선형상관관계가 나타나지만, 계절적 영향을 배제하기 어렵다는 단점이 있다.

• KIEAE Journal
• /
• 제5권3호
• /
• pp.41-48
• /
• 2005

Before occupation of an apartment housing, the builders are required to inform the test result of IAQ to the public. However, there is no simplified method to predict IAQ before measurement of pollutant concentration. In this study, a simplified way of predicting IAQ based on the distribution of indoor pollutant concentration is proposed. 7 different cases of air change rate have been simulated through CFD analysis to get the distribution ratio of each pollutant material and then simplified functions were used with CRIAQ1 values derived from CFD simulation to evaluate by comparing the influence of each material in the indoor pollutant concentration. Again, a lot of efforts which can improve the indoor air quality have been performed. Materials used in indoor space are labeled with their pollutant emission level. Installation of ventilation system in residential buildings will be regulated by a building codes sooner or later. But it is important to understand the fact that layout of walls, location or size of openings will influence the indoor air flow and pollutant concentration. And location of emitting material influences to indoor air pollutants distribution. But until now there is few recognition and consideration of these factors. Therefore, in this paper the effects of these factors is proved and some kind of guideline is made for designers after a comparison of typical apartment floor plan and a new type plan with their average pollutant concentration and its distribution of each room. CFD(Computational Fluid Dynamics) program was used to show the indoor air flow and pollutant concentration distribution. For this purpose, a typical $100m^2$ apartment floor plan was chosen as a case study model and several alternatives were reviewed to improve the IAQ performance. The simulation took place in the condition of natural ventilation through windows.

• 한국지역지리학회지
• /
• 제14권5호
• /
• pp.466-479
• /
• 2008

본 연구에서는 도시지역에서 이루어지는 마을만들기의 특징과 시사점을 도출하고자, 대구 삼덕동의 마을만들기 사례에 대해 조사하였다. 대구 삼덕동의 지리적 특징을 파악하고, 삼덕동의 마을만들기 사업의 배경과 전개 과정을 고찰할 뿐 아니라, 이 사업에 대한 삼덕등 주민들의 관심과 반응을 통해 도시 지역 마을만들기 사업의 의의와 시사점을 찾아보았다. 삼덕동은 도심에 인접하여 접근성이 좋고 주변 환경 등으로 인해 통근을 위한 주거지로서의 매력이 있는 지역이다. 그러나 점차 상업기능이 강화되고 기존 주택이 원룸으로 전환되면서 마을만들기를 통한 공동체 형성에 어려움이 예상된다. '담장 허물기'에서 시작된 삼덕동 마을만들기는 지속적으로 다양한 사업들이 발굴되고 있으며 마을만들기와 관련된 장소들은 상덕동만의 특색으로 자리매김되고 있다. 그러나 사업의 대상과 범위 등에 대한 삼덕동 주민들의 인식의 공유와 참석의 과제를 남겨두고 있다 하겠다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 춘계학술대회
• /
• pp.88-90
• /
• 1996

The right and left atrial pressures are important parameters in automatic control of a total artificial heart (TAH) within normal physiological ranges. Our TAH is composed of a moving actuator, right and left ventricles and the interventricular space enclosed by a semi-rigid housing. During operation of the TAH, the jnterventpicular space's volume is changed dynamically by the difference between the ejection volume of one ventricle and the inflow volume of the other. Therefore, the changes in pressure of the interventricular space is related to both atrial pressures. We measured the interventricular pressure (IVP) waveform using a pressure sensor and attempted to indirectly estimate the changes of atrial pressures. This method has an advantage that the sensor does not contact the blood directly. Furthermore, the IVP waveforms have its zero baseline in each pump cycle, thus the pressure measurements are free from the transducer drift problems by measuring the peak pressure from these baseline values. From the In vitro experiments, we found that the IVP waveform contained several useful parameters such as negative peak, dP/dT on the initial break, the area enclosed by the profile in each stroke, which are associated with atrial pressures and the filling conditions of the ventricles. The measured atrial pressures were linearly related to the negative peak of the interventricular pressure.

• 한국실내디자인학회논문집
• /
• 제18권6호
• /
• pp.184-193
• /
• 2009

In recent years, the architectural interest in the apartment design has been getting focused on qualitative improvement and design differentiation. Especially the facade design differentiation is one of the most important elements in this matter. The purpose of this study is to provide the basic informations that can be referenced when architects are dealing with exterior design by analyzed design types and characteristics of apartment entrances. Target apartment of this study was whasung dongtan the 2nd phase new city districts which was planned to solve a housing shortage in the capital region. Having examined eleven pilot districts, four 1st construction areas, and eight 2nd construction areas, - total 23 complexes - 282 apartment entrances in 212 apartment buildings were carefully researched. Apartment entrance design can be divided into 15 different design elements: design types and combination types, direction, shape, height, approach types, exterior wall finishes of entrance, exterior wall finishes of lower parts of apartment, handrail types of slope, floor finishes of slope, distribution ratio of piloti, ceiling height of piloti, floor finishes of piloti, space use of piloti, window establishment between piloti and elevator hall, landscape elements of piloti. Design characteristics of building entrances were also analyzed in 4 groups (I, II, III, IV) divided by construction contractors ranking. In conclusion, first, design types and combination types can be classified into 15 different kinds, and the group I and II tend to show wider variety of entrance combinations. Secondly, the height and volume of extrude entrance type tend to increase in the group I and II. Third, the spatial configuration of pilotis appears to show more of 'pass + store + break' rather than 'access', as we get closer to the group I.

• 한국전기전자재료학회논문지
• /
• 제33권4호
• /
• pp.331-335
• /
• 2020

In this study, through the accumulated technologies such as real-time monitoring of power consumption using power line communication (PLC) method, power control, and automatic blocking of standby power, to commercialize them, we developed the hardware design, algorithm, protocol and module along with data transmission using PLC. We conducted the study to develop advanced products. We also proposed cloud-based smart outlet products with a novel type of outlet. These products can measure the internal power consumption through the H/W modules and the modules that control the power of household appliances connected to the smart outlets and smart plugs. Subsequently, they transmit the measurements to the energy saving system server via a communication module. This system can control the terminal device connected to the Gateway (G/W) server through a mobile phone. This will allow the customer to check the power consumption of the building at any given time, to turn the terminal on/off, and to maximize the energy efficiency during the construction of new apartments or multi-family housing in an area.

• 설비공학논문집
• /
• 제19권5호
• /
• pp.355-363
• /
• 2007

The Korean traditional 'Ondol' system has been a target for innovation to meet the requirements of sustainable domestic building and low carbon emission energy utilization. Simulation techniques provide designers and researchers with powerful tools to predict heating load and thermal behaviour of Ondol systems installed in various contexts. However, there are few studies on Ondol models, especially associated with multi-stories buildings of which type covers about 50% of Korean housing stock. In this study, we analyzed the double floor Ondol system on the multi-stories buildings using the ESP-r program. On the basis of the double floor Ondol system, we suggested the new modelling method that is composed of the Vent zone and Ondol zone. Using the this model, sensitivity analysis was carried out to refine the applicability of the model taking account of control conditions, constructions, air change and air flow network method and CFD analysis using the FLUENT. The air layer has enough temperature to use in heating zone. It is suggested that the simplicity of the model will allow building designers and mechanical engineers easily to implement scenario-based assessments of design options as well as control strategies. Later, we will simulate the real buildings and analyze the air distributions using the Fluent according to the various conditions.

• 한국학교ㆍ지역보건교육학회지
• /
• 제21권1호
• /
• pp.15-31
• /
• 2020

Background and objectives: One-person households are the fastest growing family type in Korea. They bring social concerns such as weakened social integration, increasing poverty and social isolation. They are not homogeneous but heterogeneous groups depending on their socio-demographic characteristics including generation. This study compared the life satisfaction level as well as factors affecting it among the three one-person household generations Methods: The 13th wave of the Korea Welfare Panel dataset with 1,187 respondents was utilized. For data analysis Chi-square test, analysis of variance and hierarchical regression analysis were employed. Generations are divided into three, namely young adult (20-39), the middle-aged (40-64) and the elderly (65 and over). Result: The life satisfaction level was highest among the young adult one-person household generation, followed by the middle-aged and the elderly generation. The common factors affecting life satisfaction of the three generations were physical as well as mental health, including self-esteem and depression. However, there were more factors different from generation to generation. As for the young adult, age, religion, and smoking were significant. As for the middle aged and the elderly, gender (male) and income were significant. Additionally, age, home-ownership and drinking were significant to the elderly generation. Conclusions: As there are differences as well as similarities among the three generations, policies for one-person households need to be devised considering these findings. For all generations, both physical and mental health policies are needed. For young adult strengthening social relations, providing decent jobs, and promoting anti-smoking policy are major agenda, and for the middle-aged and the elderly, assisting in social capital accumulation (for male), providing stable jobs and diverse leisure activities, and securing income. Additionally, for the elderly, expanding the social security system and housing support are needed.

• 한국의류산업학회지
• /
• 제21권3호
• /
• pp.326-335
• /
• 2019

This study categorized 100 female subjects over 65 years of age into two groups. The first group is called 'early stage of varus', which is when the gap between the knees is less than 5 cm. The second group is called 'progressive varus', which is when the gap between knees is 5 cm (or more). We then analyzed their lower body shapes and life status. The results were as follows. The average gap between knees in the early stage group and the progressive group was 3.3 cm and 6.2 cm. Direct and indirect measurements of their lower bodies showed that subjects in the progressive group had longer legs than the other group because their legs were bent outwards. Most of the subjects were found to live in western housing conditions, but maintained sedentary lifestyles. A total of 60% of the subjects thought that they were in bad health conditions and said that they found it difficult to move their knees dynamically; in addition, 63.6% of the subjects in the early stage group and 73.5% of the subjects in the progressive group suffered from arthritis. Subjects in the progressive group were more aware than the other group that their legs were bent outwards. They also responded that bent legs do harm to their appearance and make their lives uncomfortable. Most senior females with varus did not seek medical treatment and did not buy clothes that can help change their varus. However, 95% of the subjects responded they were in need for clothes that could straighten the varus-type.

• 한국융합학회논문지
• /
• 제10권3호
• /
• pp.193-201
• /
• 2019

다가구주택은 수익형부동산으로 활용되고 있는 주택의 유형들 중 상대적으로 적은 금액으로 투자가 가능하고 소유주가 직접 거주하며 임대수익을 누릴 수 있다. 본 연구에서는 아파트에 비해 상대적으로 연구가 미진했던 주택 유형 중 하나인 다가구주택의 매매가격에 영향을 미치는 요인에 대한 분석을 통하여 다가구주택의 실수요자와 투자자의 매수 의사결정 및 디벨로퍼의 개발전략 수립 시 시사점을 제공하고자 하였다. 실증분석을 위해 경상남도 창원시에서 2016년에서 2018년 사이에 거래된 다가구주택 매매사례 299개를 구득하여 헤도닉 가격모형을 활용하여 분석하였다. 종속변수는 다가구주택의 연면 적당 매매가격으로 선정하였으며, 독립변수는 지역특성, 입지특성, 주택특성 및 시기더미로 구분하여 설정하였다. 실증분석 결과 지역적으로는 의창구과 성산구 지역의 가격이 높았고, 입지특성에서 유의한 변수로는 '주요상권과의 거리(-)', '대로 및 광로와의 거리(-)', '도로 2면 접면 여부(+)'인 것으로 나타났다. 주택특성의 변수들 중에서는 '연면적(+)', '원룸형 여부(+)', '남향여부(+)', '경과연수(-)', '옵션제공여부(+)'가 매매가격에 유의한 영향을 미치는 것으로 나타났다.