• 한국생활과학회지
• /
• 제14권4호
• /
• pp.693-707
• /
• 2005

This study investigates the over time changes in the ownership of kitchen items, electric or non-electric, and examines the patterns of the usage and ownership of the items after categorizing them as followings: cooking appliances, kitchen appliances directly related to storing food, food processing kitchen items, and dining items. The research findings are that refrigerators and rice cookers, among the electric items, had spread to almost every households by 1990s and at the same time about thirty non-electric kitchen items had been used. Refrigerators had been used by more than 100% of the households by 2000, and on top of that, twenty or more electric kitchen items such as Kimchi fridge and freezer had been used. In the case of non-electric kitchen items, approximately 50 to 70 sorts of them are used, which indicates an increase than in 1990s. Rice cookers and gas stoves, among cooking appliances, are recognized as the essential item, and they are actually frequently-used items. As to kitchen appliances related to storing food, each household owns one of the refrigerators and Kimchi fridges, and again they are both the frequently-used. As far as food processing kitchen items are concerned, each household owns at least one or more blenders and hand blenders, six or more knives, and five or more pans. Each household owns seventeen or more rice bowls and soup bowls and twenty-four or more plates. Small plates are more frequently used than large ones.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권3호
• /
• pp.149-156
• /
• 2004

This paper deals with the effective protection method for the household electric appliances against lightning surges invading from the Power lines. Direct or induced lightning is the main cause of the breakdown of household electric appliance. The most effective protection method is to install SPDs(surge protective devices) at household electric appliances. If SPDs were not installed at most household electric appliances, it is necessary to install SPDs on the mains. Therefore the propagation aspect and protection methods of lighting surges coming into household electric appliances through the mains was experimentally investigated. The in actual-sized test circuits results of protection method for 8 household electric appliances including computer monitors and TV set could be summarized as follows: The breakdown characteristics of household electric appliances from lightning surges were significantly changed with the their input impedance. Namely, the types of input impedance are classified into infinite, resistive or inductive impedances. Especially, the monitor for computer with inductive input impedance from lightning surges was relatively weak against lightning surges. It was confirmed that the self inductance of branch circuits on the mains have protection effect for household electric appliances against lightning surges invading from the power lines. Also the varistors installed at cabinet panel or circuit-breaker were more effective than multi-tap outlet with varistors. When installed varistors in cabinet panel and multi-tap outlet together, the surge protection effect is much more excellent in technical and economical aspects.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.259-259
• /
• 2004

To date, induction motors have mainly been used for heating, ventilation, and air conditioning (HVAC) applications, however, there is significant research being done world-wide on the use of switched reluctance motor(SRM) in household home appliances. This papers proposes three phase SRM for the air-conditioner blower that has cost merit and good performance respectively compared with conventional induction motor.

• 대한산업공학회지
• /
• 제41권5호
• /
• pp.414-424
• /
• 2015

In this research, we consider a smart grid network of electricity with multiple consumers connected to a monopolistic provider. Each consumer can be informed the real time price changes through the smart meter and updates his consumption schedule to minimize the energy consumption expenditures by which the required power demand should be satisfied under the given real time pricing scheme. This real-time decision making problem has been recently studied through game-theoretic approach. The present paper contributes to the existing literature by incorporating storage appliance into the set of available household appliances which has somewhat distinctive functions compared to other types of appliances and would be regarded to play a significant role in energy consumption scheduling for the future smart grid. We propose a game-theoretic algorithm which could draw the optimal energy consumption scheduling for each household appliances including storage. Results on simulation data showed that the storage contributed to increase the efficiency of energy consumption pattern in the viewpoint of not only individual consumer but also whole system.

• 한국정밀공학회지
• /
• 제11권4호
• /
• pp.106-113
• /
• 1994

Household electrical appliances should be designed to satisfy safety standards. An expert system is implemented to support the design process. The general-purpose expert system shell. ART-IM which is running under MS-DOS environment, is used to construct the knowledge-base. A set of rules has been extracted from the EN 60 335-1 that is British standard specification for the safety of household and similar electrical appliances. The main focus of this paper is on codes that have systematic and mormative structures. The internal structure of the safety standard is analysed to improve the process of rule extraction.

• 대한임베디드공학회논문지
• /
• 제12권2호
• /
• pp.79-88
• /
• 2017

One of the important applications of activity sensing in the home is energy monitoring. Many previous methodologies for detecting and recognizing household appliances have been proposed. This paper presents an approach that uses an energy metering circuit (EMC) to classify and identify the various electrical devices in home based on root-mean-square (RMS) consumed current value. EMC gathers the RMS current values created by appliance state transition (e.g., on to off) and apparatus operating process. In this paper, an identification algorithm is proposed to detect a change in current levels using the standard deviation of current signals and their average values. In addition, characteristic of the appliance is extracted concerning four feature parameters concerning the number of current levels, the minimum level, the maximum level, and signal-to-noise ratio (SNR) of them. Experiment results validate the reliable performance of the proposed identification method for 11 representative appliances.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.697-702
• /
• 2004

LG Electronics developed linear compressors for a household refrigerator which can reduce energy consumption up to $24\%$ by only Drop-ln instead of a conventional reciprocating compressor. The linear compressor is composed of a linear oscillating motor, a piston directly coupled with the linear motor, a cylinder and the specific discharge system of LG. Because of this free-piston structure, the position of the piston can be changeable according to the voltage variation, load variation and so on. By this reason, LG linear compressor has been in need of an additional unit to control the position of the free-piston stably. In this paper we will introduce the innovative technology which is able to operate the linear compressor without controlling the piston position like a conventional reciprocating compressor.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.75-81
• /
• 2006

Recently, customers interest about noise of household electric appliance is growing. so, designer of product must study to reduce noise of product. Specially, in case of household electric appliance such as washing machine, there was consumers' complaint about noise that is radiated under dehydrating condition. But, in the case of washing machine, identification of noise source is not easy when washing machine is under dehydrating condition. Because various noise source influence each other, it is difficult to find out pure contribution degree about output noise. Multi-Dimensional Spectral Analysis(MDSA) is method that can remove correlation between inputs each other and express pure contribution degree about output of single input. So in this study, we analyzed contribution of each noise source on transfer pass of noise that is radiated at dehydration of washing machine using MDSA.

• 대한가정학회지
• /
• 제46권9호
• /
• pp.7-19
• /
• 2008

This research aims to analyze rational decision behavior in different stages of purchasing for consumers buying household appliance goods and deals with differences in socio-demographic features and relevant variables among completely rational, intermediatedly rational, and irrational groups as well as variables differentiating those groups. First, one third of purchasers for Kimchi refrigerators was the rational consumer while a half of purchasers for side-by-side refrigerators and washing machines was. Second, there was no significant differences in satisfactions levels after purchase between rational and irrational groups among purchasers of side-by-side refrigerators but between completely and intermediately rational groups in the case of Kimchi refrigerators. Rational groups of consumers for Tromm washing machines rely on various places for purchase and also show the high level of intention for repurchase. Third, in studies of variables differentiating rationality in purchase behavioral patterns of consumers, rational choices turn out to prevail (1) among purchasers of married, college graduated, employers, and high income in the case of side-by-side refrigerators, (2) among buyers of male, old-aged, college graduated, non-employers, low, income, and hurrying to purchase in the case of Kimchi refrigerators, and (3) among buyers of old-aged, high income, not hurrying to purchase, and visiting numerous stores in the case of Tromm washing machines.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권5호
• /
• pp.487-493
• /
• 1999

To predict the background level of harmonics produced by household appliances, information on the site, capacity, and usage pattern of these loads arenecessary. However, as household appliances are distributed widely and various in type, it is difficult to know these kinds of information accurately. This paper presents a method for estimation of background level of harmonics produced by distributed harmonic sources with readily available data. Large industrial customers are excluded from this study. In this paper, customers are grouped into three classes, i.e. residential, commercial, and industrial. Typical customers for each class are assumed and characteristics of their equipments are modeled. As the proposed method does not require harmonic measurement, it can be employed to forecast voltage total harmonic distribution (VTHD) in the future. An illustrative example is described.