• Food Science and Preservation
• /
• v.17 no.2
• /
• pp.230-235
• /
• 2010

We investigated the physicochemical quality characteristics of apple juice upon sterilization using hot water, and under various storage conditions. None of sugar content, acidity, or pH differed significantly among various sterilization conditions but chromaticity was considerably reduced in sterilized juice compared with control material. The chromaticity of non-sterilized juice decreased significantly after sterilization compared with material supplemented with vitamin C (0.1%, w/v). Fungi, yeast, and aerobic bacteria were detected in juice sterilized at $65^{\circ}C$ for 10 or 20 min, but no microorganisms were observed in juice sterilized by other procedures. Vitamin C content affected sterilization temperature to a greater extent than sterilization time. When juice was stored at $4^{\circ}C$ or $37^{\circ}C$ for 3 weeks after application of different sterilization conditions, almost no change in acidity, sugar content, or pH was observed, regardless of sterilization mode or storage period. However, chromaticity decreased with longer storage. Vitamin C levels were reduced by higher sterilization temperatures. However, longer storage periods had the greatest effect on reduction of vitamin C levels, which tended toward lower values regardless of differences in sterilization and storage conditions. In sensory evaluation tests, all of taste, color, and overall preference were highest for juice sterilized at $75^{\circ}C$ for 20 min. The ASC value was low at a storage temperature of $4^{\circ}C$ and at high sterilization temperatures, and a long storage period was associated with a greater ASC value. Thus, the quality of apple juice was excellent when juice was hot water-sterilized, with additional vitamin C, at $75^{\circ}C$ for 20 min, followed by storage at $4^{\circ}C$.

• Journal of Food Hygiene and Safety
• /
• v.37 no.5
• /
• pp.310-316
• /
• 2022

In this study, we compared the microbial reduction effects of drying, hot water, and microwave sterilization in scourers and dishcloths to suggest a most suitable sterilization method. Three scourer types (silver, copper, and mesh) were used, and three dishcloth types (silver, bamboo, and cotton) were used. Drying time dependent reduction in Escherichia coli was high in silver and copper scourers, but minimal bacterial reduction was obtained against Bacillus cereus in all scourers and dishcloths. In scourers, E. coli was not detected after ≥30 s of hot water sterilization at 77℃, and B. cereus was not detected after ≥60 s of hot water sterilization at 100℃. In dishcloths, E. coli was not detected after hot water sterilization at 77℃ for ≥30 s, but B. cereus was detected after hot water sterilization at 100℃ for ≥60 s. In scourers, E. coli was not detected after microwave sterilization at 700 W for 3 min, but B. cereus was detected. In dishcloths, E. coli was not detected after microwave sterilization with 700 W for ≥1 min, but B. cereus was detected in the cotton dishcloth even after sterilization for 3 min. In conclusion, the use of antimicrobial scourers (silver and copper) and dishcloths (silver and bamboo) are not sufficient to reduce the microbial contamination. The guideline provided by the Ministry of Food and Drug Safety suggesting dishcloth sterilization via hot water at 100℃ for 30 s was also found to be insufficient. Based on our research, we suggest that the most effective methods of microbial management are submerging scourers in hot water at 100℃ for ≥1 min, and sterilizing dishcloths for ≥3 min using a 700 W microwave.

• Korean Journal of Food Science and Technology
• /
• v.15 no.3
• /
• pp.282-286
• /
• 1983

In order to obtain practical information for efficient energy usage in sterilization, energy consumption was monitored for various processing variables, i.e. heat transfer type (conduction and convection), can size (No. 202-2, No. 301-3, No. 301-7, and No. 603-2), retorting temperature $(110^{\circ}C-121^{\circ}C\;and\;130^{\circ}C)$, and sterilization method (steam, and hot water sterilization). Less energy was consumed for smaller can size and higher temperature, and this trend was more distinguished in conductive food than convective food. Hot water sterilization could lower energy consumption in conductive food, but not in convective food. Energy consumption data of this work was reasonable when compared with energy consumption of sterilization in canneries, and therefore thought to be able to be used for estimation, design and optimization of energy consumption in sterilization.

• Journal of the Korean housing association
• /
• v.19 no.1
• /
• pp.79-88
• /
• 2008

Hot water is used by having a wash, dishes, taking tub and drinking water in residential buildings, and the use objective is to raise comfort of human body sense, washing and sterilization effect and so on. Cold & hot water supply system is understanded simpler than HVAC systems relatively, so it is true that pace of performance improvement is slower than other systems for plan and technical development. In this study, the performance evaluations are conducted under the condition of composition ratio by 1:1 for cold & hot water supply manifold system using functionally complex valves such as constant flow regulating valve and 3-way mixing valve in the area of $105.6m^2$ apartment which consist of the largest part of the whole apartment. Also, flow rate related to simultaneous use of faucets and change of hot water temperature are compared with the existing method.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.14 no.1
• /
• pp.47-58
• /
• 2003

Brown rice was used as material for solid-substrate cultivation of Ganoderma lucidum. The hydration time with cold water appeared to be 10 hours for brown rice, but the final water content was much less than optimum water content(65%). Hot water reduced the hydration time of brown rice, and the water content reached to 65% within 40 mins. From this result, hot water was better than cold water for the hydration of brown rice. We attempted to develop a practically applicable process by combining the soaking and sterilization. The water content of 65% appeared to be the best for the growth of the fungi and production of glucosamine related to the amount of mycelium. The content of free sugar increased far more in brown rice fermented with mycelium than in brown rice which was not fermented. Addition was most suitable 20% when add mushroom-rice to brown rice.

• Journal of agriculture & life science
• /
• v.53 no.3
• /
• pp.27-39
• /
• 2019

The purpose of this study was to investigate the effect of hot water treatment and pH corrected lime sulfur combination treatment on the fungicidal and bacterial disinfection effects and germination rate of organic lettuce seeds. Among the followers, Alternaria sp. was infected 53.3% and Aspergillus sp. and Cladosporium sp. Infected 14.5% and 5.4%, respectively. Bacteria were isolated only Pseudomonas sp., and infected with 16.5%. In order to investigate the effect of disinfection on the temperature of hot water (45℃, 50℃, 55℃ and 60℃). The seed germination rate sharply decreased with increasing temperature and treatment time. The germination effect and germination rate of the follower were highest when hot water treatment was carried out for 20 minutes in hot water at 50℃. In the case of combined treatment of 50℃ hot water for 10 min and 0.4% pH adjusted lime sulfur mixture, showed the highest sterilization effect and germination rate with 100% and 97.6%, respectively. The results of this study can contribute to the development of technology to sterilize not only seed surface but also fungi and bacteria inside of seed.

• Research in Plant Disease
• /
• v.15 no.1
• /
• pp.30-35
• /
• 2009

This study was carried out to determine the causal agents of soil-borne fungal diseases that pose a threat to the muskmelon production in Cheong Yang, Korea and to investigate the potential effects of hot water drenching and three fumigant (metam sodium, dazomet and methyl bromide) on these diseases. As the agents of the diseases, Monosporascus cannonballus, Didymella sp., Fusarium sp., Phytophthora sp., were detected. Hot water and the fumigants were treated on two successive cropping seasons of melon. Soil temperature was measured at 0, 10, 20 and 30 cm soil depth. In 2005, soil sterilization by hot-water was more effective significantly to control of the diseases than by fumigant. yield was the highest in hot-water sterilized plot as $39\;ton{\cdot}ha^{-1}$. Dazomet ($50\;g/m^2$) treated plot was followed as $23\;ton{\cdot}ha^{-1}$. In 2006, hot water sterilized plot showed higher yields than non-treated plots ($14.8\;ton{\cdot}ha^{-1}$). But the other three fumigant contained Dazomet ($50\;g/m^2$) were no difference (P<0.05) in yield.

• Journal of Fisheries and Marine Sciences Education
• /
• v.23 no.4
• /
• pp.709-722
• /
• 2011

This study was investigated to obtain basic data which can be applied to processing of retort pouched seasoned sea mussel. Shell was washed and steamed before shucking. Sea mussel meat was seasoned in boiled and mixed seasoning sauce(soy sauce 23%, monosodiun glutamate 2%, sorbitol 2%, sesame oil 1%, vinegar 2%, starch syrup 15%, water 55%) for 30 min. The seasoned sea mussel was vacuum packed in plastic film bag and sterilized for various Fo values(Fo 7~13 min.) in a hot water circulation system retort at $121^{\circ}C$. The chemical composition such as pH, VBN, amino-N, total amino acid, free amino acid, color value (L, a, b), texture profile, TBA value, mineral, sensory evaluation and viable cells count of the retort pouched seasoned sea mussels sterilized with various conditions(Fo 7~13 min.) were measured. The same experimental items were also measured during storage. There was no remarkable difference between sterilization conditions and sensual characteristics. The results showed that the product sterilized at Fo 7 min. was the most desirable because this condition is most economical.

• Journal of Food Hygiene and Safety
• /
• v.36 no.5
• /
• pp.447-453
• /
• 2021

In this study, the effectiveness of physical control technology, a combined light sterilization (LED, UV) and hot water treatment in reducing Aspergillus ochraceus for food production environment was investigated. In brief, 1 mL aliquot of A. ochraceus spore suspension (10^7-8 spore/mL) was inoculated onto stainless steel chips, which was then dried at 37℃, and each was subjected to different physical treatment. Treatments were performed for 0.5, 1, 2, 5, 8, and 11 hours to reduce the strains using a light-emitting diode, but no significant difference was confirmed among the treatments. However, a significant reduction was observed on the chips treated with UV-C exposure and hot water immersion. After being treated solely with 360 kJ/m² of UV-C on stainless steel chip, the fungi were significantly reduced to 1.27 log CFU/cm². Concerning the hot water treatment, the initial inoculum amount of 6.49 log CFU/cm² was entirely killed by immersion in 83℃ water for 5 minutes. Maintaining a high temperature for 5 minutes at the site is difficult. Thus, considering economic feasibility and usability, we attempted to confirm the appropriate A. ochraceus reduction conditions by combining a relatively low temperature of 60℃ and UV rays. With the combined treatments, even in lukewarm water, A. ochraceus decreased significantly through the increases in the immersion time and the amount of UV-C irradiation, and the yield was below the detection limit. Based on these results, if work tools are immersed in 60℃ lukewarm water for 3 minutes and then placed in a UV sterilization device for more than 10 minutes, the possibility of A. ochraceus cross-contamination during work is expected to be reduced.

• The Korean Journal of Mycology
• /
• v.24 no.1 s.76
• /
• pp.81-88
• /
• 1996

Cereals were used as solid-substrate for the cultivation of Ganoderma lucidum. The hydration time with cold water appeared to be 10, 11 and 12 hours for Malt, Danyeob and Black soybeans respectively, and the water content was enough for mycelial growth in this condition. The hydration times required for sorghum, job's tears, barley, brown rice and wheat were 2.5, 4, 5, 10 and 12 hours respectively, but the final water content was much less than optimum water content (65%). Hot water reduced the hydration time of soybeans, and the water content reached to 65% within $120{\sim}150$mins. This condition showed the optimum for the mycelial growth. For the other cereals, it took about $17{\sim}120$ mins to reach the optimum water content (65%). From this result, hot water was better than cold water for the hydration of cereals. We attempted to develop a practically applicable process by combining the soaking and sterilization. This process was successful with soybean and about 1.1 times of water based on the weight of soybean appeared to be suitable. In all varieties of cereal, the water content of 65% appeared to be the best for the growth of the fungi and production of glucosamine related to the amount of mycelium. The mycelial growth rate in accordance with kinds of solid-state materials was in the order of barley > wheat > job's tears > sorghum > brown rice > soybean. The glucosamine content for determing the mycelial growth in solid material was in the order of wheat> barley > brown rice > job's tears > sorghum > soybean.