• 한국대기환경학회지
• /
• 제17권1호
• /
• pp.75-84
• /
• 2001

Hot gas filtration method via using ceramic filters is an evolving technology applicable to numerous industrial and air pollution control processes. Alumino silicate, organic and inorganic binders were the major raw materials in manufacturing ceramic filters. In this work, disc type ceramic filters(50$\phi$$\times$10t) were manufactured by vacuum forming processes using ceramic raw materials. The porosity and bulk density of disc type ceramic filers ranged from 86 to 89% and from 0.27 to 0.36 g/㎤, respectively. In this work disc type ceramic medium were tested utilizing coupon experimental apparatus. Disc type filters showed high collection efficiencies over 99.96% with Darchs law coefficients of 4.1$\times$10(sup)10~9.63$\times$10(sup)10/$m^2$ depending on mean pore sizes. In addition, filtration and detachment of ceramic filters turned out to be performed effectively using 10 cm/sec face velocity, 5 minutes filtration cycle, 100msec pulse jet valve opening time and 3 bar pulsing pressure.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.812-815
• /
• 2007

Computational simulation has been performed to design the filtration system for Korea model IGCC demonstration plant. The filtration system for optimal design has four effective filters corresponding to the clusters composed of a group of ceramic candle filters. It was analyzed how the different entrance geometry influences the flow field and the particle behavior in the filtration system. The particle loading is minimum when the gas mixed with particles flows into the filter vessel with a shroud tube through a tangential inlet. However, the particle loading is maximum when the gas with particles enters the filter vessel through a normal inlet which a entrance tube extended from. By controling adequately both conditions of inflow, the filtration system can be operated optimally to prolong the filter life-time and to save the energy for cleaning filters.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.597-598
• /
• 2006

Gas filtration at high temperature from industrial processes offers various advantages such as increasing process efficiency, improving heat recovery and materials resource recovery, etc. At the same time, it is an advanced environment protection technology. This paper describes a newly developed metallic filter element. The manufacturing process of sintered $Fe_3Al$ metallic powder and the mechanical and filtration characteristics of this filter element were investigated. In this work, the phase constituent changes of the $Fe_3Al$ powder during sintering were studied. The newly developed filter elements were found to have excellent corrosion resistance, good thermal resistance, high strength and high filtration efficiency.

• 에너지공학
• /
• 제3권2호
• /
• pp.172-178
• /
• 1994

고온, 고압하에서 효율적으로 분진을 제거하는 고온 여과재는 IGCC의 Hot Gas Cleaning, 화학공정 등에 유용하게 사용될 수 있으며 전세계적으로 pilot 또는 semicommercial scale로 연구개발 중에 있다. 본 논문에서는 디스크형(50 $\times$10t) 섬유형 여과재를 제조하여 $600^{\circ}C$에서 제철, 유리, 제지 및 석탄화력발전소 배출분진을 이용한 성능시험을 수행하였다. 개발된 여과재의 저항계수는 1010―5$\times$1011의 범위에 존재하였고 총집진효율은 99.7%이상의 높은 효율은 나타내었다. 또한 분진의 표면여과 속도는 10cm/sec로 기존여과 집진기의 5배이상으로 유지하였고 탈진강도 2기압, 탈진시간 0.1초에서 효율적인 집진 및 탈진이 되었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.341-344
• /
• 2008

Computational studies have been performed to analyze the particle loadings onto the filters according to the different inflow pattern of dusty gas and the flow uniformities on the filter surface of back-blown gas at different permeability of porous media setup at the filter outlet. This is preliminary study to find how we can reduce the regeneration time and improve the regeneration efficiency of filters with dust layer.

• The Korean Journal of Ceramics
• /
• 제5권3호
• /
• pp.284-287
• /
• 1999

CuO catalyst-coated alumino-silicate fiber filters were prepared for the simultaneous removal of particulate matter and gaseous contaminants such as NOx and SOx. Hot gas cleaning experiments similar to Shell UOP process other than the catalyst supporting materials were carried out between 300 and $500^{\circ}C$ for the evaluation of the gas removal efficiency of the catalytic filter. Experimental results showed that removel efficiency for $SO_2$ was greater than 99% in the temperature range 450~$500^{\circ}C$ and more than 90% of NO was collected between 350 and $370^{\circ}C$. It was found that the higher the CuO content, the higher the removal efficiency for $SO_2$. Removal efficiency for NO was more affected by the gas cleaning temperature than by the CuO content in the catalyst-filter.

• Korean Chemical Engineering Research
• /
• 제46권5호
• /
• pp.983-987
• /
• 2008

IGCC 파일럿 플랜트의 집진시스템을 최적 설계하기 위하여 수치해석을 수행하였다. 서로 다른 가스 유입 방식이 집진용기 내부의 유체 유동장과 입자 거동에 미치는 영향을 분석하였다. 필터 표면에 전달되는 입자의 부하율은 분진입자가 혼합된 가스가 내부에 차단관이 설치된 집진용기의 외벽에 접하게 설치된 접선 유입구를 따라 집진용기 내로 유입되는 경우 아주 낮았으며, 입자크기가 클수록 입자부하율은 급격히 감소하였다. 이에 반하여, 가스 유동이 집진용기의 필터지지판 중앙에 수직하게 설치된 수직 유입구를 통하여 집진용기 내로 유입되는 경우, 필터 표면으로의 입자 부하율이 아주 높았으며, 입자크기 증가에 따른 입자부하율의 감소는 접선 유입 방식에 비하여 크지 않았다.

• 한국분말재료학회지
• /
• 제21권5호
• /
• pp.389-398
• /
• 2014

Macroporous ceramics with tailored pore size and shape could be used for well-established and emerging applications, such as molten metal filtration, biomaterial, catalysis, thermal insulation, hot gas filtration and diesel particulate filters. In these applications, unique properties of porous materials were required which could be achieved through the incorporation of macro-pores into ceramics. In this article, we reviewed the main processing techniques which can be used for the fabrication of macroporous ceramics with tailored microstructure. Partial sintering, replica templates, sacrificial fugutives, and direct foaming techniques was described here and compared in terms of microstructures and mechanical properties that could be achieved. The main focus was given to the direct foaming technique which was simple and versatile approach that allowed the fabrication of macro-porous ceramics with tailored features and properties.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 춘계 학술대회
• /
• pp.32-39
• /
• 2005

원자력연구시설의 핫셀 내 바닥이나 장치표면에 부착된 방사성 오염입자의 제거를 위해서 PFC 제염기술을 적용한다. 고가인 PFC 제염용액의 재사용을 위해서는 여과장치의 개발이 필요하고 제염종료 후 이차폐기물의 양을 최소화할 필요가 있다. 여과막을 이용한 입자의 제거효율 측면에서 보면 Ceramic, PVDF, PP 막 모두가 $95\%$ 이상의 높은 여과 성능을 보였다. 기공 크기가 같은 동일 여과막에서는 입자가 크거나 공급되는 압력이 높을수록 좀더 성공적인 입자의 제거효율을 나타내었다. 투과 성능은 PVDF 막이 가장 높은 수준을 나타내었고 Ceramic과 PP 막에서는 다소 낮은 성능을 보였다. PVDF 막은 낮은 압력과 짧은 여과시간으로 최대(한계) 투과량에 도달함을 확인하였다. Ceramic 막은 모의입자의 제거효율은 높지만 다소 낮은 투과 성능을 나타냈다. 또한, 막 자체의 비싼 가격과 쉽게 부서지는 성질의 단점을 지니고 있지만 무기화합물의 재질로 되어있기 때문에 알파방사능 환경에서 $H_2$ 가스를 발생하는 고분자 막인 PVDF, PP 막과 비교하여 훨씬 안정적이므로 실제 핫셀에 적용 가능함을 알 수 있었다.

• 한국대기환경학회지
• /
• 제19권3호
• /
• pp.297-306
• /
• 2003

Works were focused on back pressure characteristics of ceramic fiber filter on DPF (Diesel Particulate Filter) system and experiments were performed to select appropriate filter which can filter particulates. Filters were installed on metal -support tube which has openings for exhaust gas flow. Ceramic fiber filters with high specific surface area and adequate high temperature strength are commercially available for filtration of diesel particulates and in -situ hot regeneration. Thus, ceramic blanket and ceramic board which are used as insulating media were applied to filter and filtration apparatus was installed on exhaust gas line connected to 2.0 L diesel engine. Alternating filter structure to adapt DPF system, collection efficiency test of diesel particulates was measured. In case of ceramic blanket, pressure drop was low, caused by the destruction of soft structures. Also, particulate collection efficiency was decreased depending on loading time. In case of ceramic board, structure design was altered to reduce back pressure on DPF system. Structure design was altered to induce Z-flow by making 10 mm and 5 mm holes on the surface of media. Alteration of 5 mm hole showed that media have low back pressure but particulate collection efficiency was 77%, while 10 mm hole showed that of 90%.