• Journal of Soil and Groundwater Environment
• /
• v.11 no.4
• /
• pp.41-47
• /
• 2006

The evaluations of daily safe yield and reciprocal influence of hot spring wells are important subjects that the specialized agencies of hot spring has to survey. The survey of hot spring had been executed by Korea Institute of Geoscience and Mineral Resources (KIGAM) prior to 1996. However, as of 2006, eight specialized agencies of hot spring are working on it and so the survey of hot spring is not consistent now. This study was carried out to analyze data from hot spring in the same way by every specialized agency. The time of residual drawdown was applied to evaluate daily safe yield because some of wells have slow recovery of drawdown. The reciprocal influence between hot spring wells was evaluated by drawdown of observation wells when a new well was pumped.

• The Korea Journal of Herbology
• /
• v.32 no.4
• /
• pp.39-46
• /
• 2017

Objectives : This study aims to provide basic data about Portulacae Herba (PH) extracts as natural antioxidants by considering diverse antioxidant activities of PH depending on solvents. Methods : The samples of PH were pulverized, and A hot water and a 70% EtOH were stir-extracted for two hours three times repeatedly in a water bath with a temperature of 95 degrees and at room temperature respectively to measure 7 kinds of antioxidant activities. Results : There were significant differences in total phenol content, because the total phenol content of the 70% EtOH extract was higher than the hot water extract's, and the total flavonoid content of the 70% EtOH extract($4.40{\mu}g/mg$) was nearly 3.8 times higher than the hot water extract's($1.16{\mu}g/mg$). DPPH and ABTS radical scavenging activities were 70% EtOH extract showed a little higher activity than the hot water extract, and at a concentration of $500{\mu}g/mg$, the highest scavenging activity was found in the 70% EtOH extract, not in the control group. Hydroxyl radical and $Fe^{2+}$ chelatingactivities were slightly higher in hot water extract than in 70% EtOH extract, and increased in a dose-dependent manner. Nitrite scavenging activities increased dose-dependently in the hot water and the 70% EtOH extract, regardless of the pH level, and scavenging activity of the 70% EtOH extract was higher at pH 1.2 than at pH 3.0. Conclusions : In conclusion, it is thought that PH hot water and 70% EtOH extract have antioxidant activities, and can be used as natural antioxidants in future.

• The korean journal of orthodontics
• /
• v.54 no.3
• /
• pp.153-159
• /
• 2024

Objective: This study aimed to assess the effects of commonly consumed hot drinks on the force decay of orthodontic elastomeric chains. Methods: This in vitro experimental study evaluated 375 pieces of elastomeric chains with six rings placed on a jig. Four rings were stretched by 23.5 mm corresponding to the approximate distance between the canine and the second premolar. Fifteen pieces served as reference samples at time zero, and 360 pieces were randomized into four groups: control, hot water, hot tea, and hot coffee. Each group was further divided into six subgroups (n = 15) according to the different exposure periods. The specimens in the experimental groups were exposed to the respective solutions at 65.5℃ four times per day for 90 seconds at 5-second intervals. The control group was exposed to artificial saliva at 37℃. The force decay of the samples was measured at 1, 2, 7, 14, 21, and 28 days using a universal testing machine. Data were analyzed using repeated-measures analysis of variance. Results: Maximum force decay occurred on day 1 in all groups. The minimum force was recorded in the control group, followed by the tea, coffee, and hot water groups on day 1. At the other time points, the minimum force was observed in the tea group, followed by the control, coffee, and hot water groups. Conclusions: Patients can consume hot drinks without concern about any adverse effect on force decay of the orthodontic elastomeric chains.

• CELLMED
• /
• v.14 no.10
• /
• pp.10.1-10.6
• /
• 2024

Background and Objectives: As per the available data, 75% peri and postmenopausal women experience hot flashes having negative effect on their quality of life. Using herbal medicines are stepping forward to alleviate hot flashes as the available hormonal medications have been reported the presence of side effects. This study was planned with the intention to investigate the effect of Asparagus racemosus root in the treatment of postmenopausal hot flashes in comparison to the placebo. Methods: This prospective patient blinded clinical trial randomly assigned 40 postmenopausal women with symptoms of hot flashes to receive either test drug (n=20) comprising Asparagus racemosus tablet of 1g in the dosage of 2 tablet thrice in a day for the duration of 60 days continuously or to receive placebo tablet prepared from roasted wheat flour in the same dosage and duration as test drug. The efficacy was determined by reduction in the frequency and intensity of hot flashes assessed by daily diary along with the improvement in quality of life assessed through Hot Flash-Related Daily Interference Scale. Statistical analysis was accomplished by student t test and Chi-square/Fisher Exact test. Results: Test drug significantly (p <0.001) reduced the intensity and frequency of hot flashes as well as improved the quality of life without showing any side effect. Discussion & Conclusion: According to Unani scriptures, the treatment is to treat the underlying cause, such as aberrant temperament and psychological and environmental issues. Unani drugs have emmenagogue, anti-inflammatory, analgesic, and neuroprotective qualities that can help alleviate premenstrual symptoms. Unani herbs such as C. sativus, Vitex, agnus castus, P. vulgare, N. Jatamansi, M. officinalis, and Z. officinalis have been clinically demonstrated to be effective in PMS. Thus, traditional knowledge authentication and conservation are vital for future research and appreciated for application in the modern day. Furthermore, randomised controlled trials, comprehensive reviews, and meta-analyses are suggested.

• Journal of KIISE:Databases
• /
• v.36 no.2
• /
• pp.99-111
• /
• 2009

In wireless sensor networks, various schemes have been proposed to store and process sensed data efficiently. A Data-Centric Storage(DCS) scheme assigns distributed data regions to sensors and stores sensed data to the sensor which is responsible for the data region overlapping the data. The DCS schemes have been proposed to reduce the communication cost for transmitting data and process exact queries and range queries efficiently. Recently, KDDCS that readjusts the distributed data regions dynamically to sensors based on K-D tree was proposed to overcome the storage hot-spots. However, the existing DCS schemes including KDDCS suffer from Query Hot-Spots that are formed if the query regions are not uniformly distributed. As a result, it causes reducing the life time of the sensor network. In this paper, we propose a new DCS scheme, called TPDCS(Time-Parameterized DCS), that avoids the problems of storage hot-spots and query hot-spots. To decentralize the skewed. data and queries, the data regions are assigned by a time dimension as well as data dimensions in our proposed scheme. Therefore, TPDCS extends the life time of sensor networks. It is shown through various experiments that our scheme outperform the existing schemes.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.199-203
• /
• 2003

Idler of excavator are large product with diameter 500 - 600 mm and parts of a power transmit device. The object of the paper is developed large products by hot closed-die forging. The forging process which is proposed from numerical analysis and various tests is developed a large products with good quality. To estimate the design process parameters such as working load, temperature and flash thickness so on, numerical analysis are used by DEFORM 2D. To obtain a flow stress data and optimal forging temperature is carried out hot compression and tensile test at a various temperature range. Developed product is tested mechanical properties of elongation, hardness and tensile strength so on. Test results are presented excellent mechanical properties.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.7
• /
• pp.549-556
• /
• 2001

Heat flow characteristics during hot water extraction process was studied experimentally. Data were taken at various outlet port type for the fixed inlet port type, inlet-outlet temperature differences and mass flow rates. In this study, the temperature distribution in a storage tank and an outlet temperature were measured to predict a flow pattern in the storage tank, and a hot water extraction efficiency was analysed with respect to the variables dominating a extraction process. Experimental results show that the extraction efficiency is high in a low flow rate in case of using modified distributor I(MDI) as a outlet port type.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1645-1650
• /
• 2003

A numerical and experimental study is made of thermal behavior of a hot chuck which is specially designed for flip-chip bonders. The hot chuck consists of radiant heat sources and a heated plate of very high conductivity, which is for achievement of high-speed heat-up. A simplified numerical model is developed to simulate unsteady thermal behavior of the heated plate. Parallel experimental work is also conducted for a prototype of the hot chuck. Based on the experimental data, the numerical model is tuned to improve the reliability and accuracy. Design analysis using the numerical model is conducted. The results of numerical computations illustrate that the radiant heater system adopted in this study satisfies the key design requirements for a high-performance hot chuck.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2002.05a
• /
• pp.83-88
• /
• 2002

This study is to provide the experimental information and basic data on heat transfer characteristics of horizontal liquid film driven by hot wind. Heat transfer characteristics of the liquid film in the rectangular duct was observed and the change of film temperature was measured. The experiments were carried out for a variety of parameter, such as feed water rate and velocity and temperature of feed air. From the observation and the measurement the general understanding of heat transfer characteristics for liquid film driven by hot wind was provided.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.418-421
• /
• 2003

Specimens of Ti-10Ta-10Nb have been hot upset forged after heating to either the $\alpha$+$\beta$ and $\beta$-phase field. The variety temperatures (At 650, 700, 750, 800, 85$0^{\circ}C$) and strain rates (At 0.001, 0.01. 0.1, 1, 10 $s^{-1}$ ) were used. On the basis of flow stress data obtained as a function of temperature and strain rate in compression, a processing map for hot working has been developed. At strain rates lower than about 0.1 $s^{-1}$ and almost temperatures, processing efficiency exhibited high, but at 0.001 $s^{-l}$, and temperature 80$0^{\circ}C$, low because the Shear band has occurred. On the basis of the processing map, the optimum processing routes available for hot working of this material are outlined.d.