• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.364-367
• /
• 2008

Finite element model and the basic experimental method have been developed to help the design of the transverse ultrasonic horn for flip-chip bonding. With two types of design the horn performance and ultrasonic characteristics are verified by using laser vibrometer. These analysis and experiment results can be the fundamental data for ultrasonic horn design considering the vibration modes and performance.

• 한국통신학회논문지
• /
• 제21권8호
• /
• pp.2099-2108
• /
• 1996

The performance of the E-plane monopulse feeder is shown to e improved by using corrugated horn and multimode design. The proposed multimode corrugated horn is analyzed by the mode matching technique. an E-plane monopulse feeding horn is designed and fabricated to show the performance of the multimode corrugated horn. The experiment agrees quite well with the thoretical analysis. The results can be used in the design of monopulse type tracking radar antenna.

• 약학회지
• /
• 제5권1호
• /
• pp.6-9
• /
• 1960

Influences of deer horn on serum cholesterol level as well as growth rate of experimental cholesterol-fed rabbit were observed. The cholesterol level rose progressively in all cholesterol-fed rabbit and only after 17th day of experiment, cholesterol-level in animal treated with deer horn significantly increased at much lower rate than control group. Above results suggested that deer horn might decrease the abnormally elevated serum cholesterol.

• 한국소음진동공학회논문집
• /
• 제25권3호
• /
• pp.141-149
• /
• 2015

In this study, there is an investigation about the sound quality of automotive horn that attached to luxury sedans. In order to define a questionnaire of horn sound quality the factor analysis is conducted. Ten automotive horns are selected for this research and ten passenger cars(nine is luxury sedan and one economy class car). Luxury is used for the questionnaire as an attribute for the sound quality of car horn. The interior noises for ten test cars are recorded and used for the subjective analysis of car horn sound. In the paper, new sound metric for the car horn sound is presented. The new sound metric is used for the objective sound index for the prediction of subjective sound quality of car horn.

• 한국도로학회논문집
• /
• 제17권2호
• /
• pp.135-141
• /
• 2015

PURPOSES : While driving, drivers are usually limited in communicating with others except for using the horn. Excessive use of the horn may cause noise pollution, quarrels between drivers and pedestrians, damage, etc. This study developed a methodology for environmental adaptation and improvements of vehicle horns. METHODS: In this study, we performed a literature review of previous studies and related technologies regarding the overuse and damage of the horn. The proposed methodology employed the paired comparison method, as well as the semantic differential method. These methods can consider various vehicle horns, such as the Sport Utility Vehicle(SUV) Horn, Van Horn, and Buzzer. In addition, we conducted a factor analysis in order to provide a direction for improvement of future horns. This research provides a means of complimenting existing intellectual property related to vehicle horns. RESULTS: As a result, the most preferred of the selected horns were the Buzzer at 86.7%. In addition, based on the factor analysis, the horns could be classified into pleasantness and comfort factors. The results indicate a positive reaction for various vehicle horns. The horn type and size of the process control have been properly developed considering the position of the vehicle and the surrounding noise measurements. CONCLUSIONS : Based on the proposed methodology, public and private sectors can use fundamental data for reasonable traffic-noise control policies.

• Journal of electromagnetic engineering and science
• /
• 제14권2호
• /
• pp.74-78
• /
• 2014

This paper presents a modified TEM horn that improves radiation characteristics at a low frequency region. The proposed antenna consists of an asymmetric TEM (ATEM) horn and a loop structure with an elliptical shape. The bandwidth and gain at low frequency region can be enhanced by using the ATEM horn configuration and adding a loop structure with an elliptical shape to the ATEM horn. The bandwidth of the proposed antenna is from 2.14 to over 20 GHz, whereas that of the conventional TEM horn is from 2.7 to over 20 GHz, where the dimensions of both antennas are the same except for the thickness of the loop structure. The physical and electrical dimensions of the proposed antenna are $60mm{\times}62.5mm{\times}64mm$ ($width{\times}height{\times}length$) and $0.428{\lambda}_L{\times}0.445{\lambda}_L{\times}0.456{\lambda}_L$, where ${\lambda}_L$ corresponds to the lowest frequency of the bandwidth. The realized gain of the proposed antenna is improved by 0.802 dB on average at the low frequency region (2 to 8 GHz), where the maximum gain increase is 2.932 dB when compared to a conventional TEM horn.

• 한국전자파학회논문지
• /
• 제19권6호
• /
• pp.640-646
• /
• 2008

밀리미터파 대역에서 동작하는 컬러게이트 혼 안테나의 설계법을 나타낸다. 컬러게이트 혼 설계에 있어서 가장 중요한 하이브리드 조건을 계산한다. 본 논문에서는 파장이 짧은 밀리미터파에서 평형 하이브리드 모드의 변환과 제작이 가능한 크기의 컬러게이트 프로파일을 구한다. 모드 이론을 적용하여 혼 내부 및 컬러게이트 내 전자계를 유도한다. 혼의 전파 특성은 모드 임피던스 정합과 경계 조건으로부터 계산하고, 혼 개구면 전자계로부터 Kirchhoff-Hyugen 원리를 적용하여 방사 전자계를 구한다. $85{\sim}115GHz$ 대역에서 동작하는 밀리미터파 컬러게이트 혼 안테나를 설계하고, 전기 포밍 방식으로 제작한다. 측정 결과, 동작 주파수 대역에서 1.3:1 이하의 VSWR과 주파수 85, 100 및 110 GHz에서 각각 9.2, 9.16 및 9.02도의 반치각이 측정됨으로써 이론적 결과와 잘 부합되고 있음을 보인다.

• 동의생리병리학회지
• /
• 제19권5호
• /
• pp.1243-1250
• /
• 2005

This study was performed to investigate the effect of oral administration of deer horn against the asthma. Deer horn improves body metabolism and strengthens overall health, especially in elderly persons and young children. Additionally, it stimulates sexual function in females and can stimulate wound healing. Asthma was induced to Balblc mouse by i.p. injection and aerosol immunization with ovalbumin. It was observed the change of the eosinophil number in the BALF. Concentrations of IL-4, IL-5 in BALF and splenocyte were assessed by ELISA, IgG and IgE from serum were calculated by same method. The number of eosinophil in BALF was not significantly changed in deer horn group compared with control group. Concentration of IL-4 in BALF was significantly decreased in deer horn group compared with control group. Levels of IL-5 from BALF and splenocyte were significantly decreased in deer horn group compared with control group, respectively. Concentrations of IgE and IgG in serum were significantly decreased in deer horn group compared with control group, separately. We found that the effect of deer horn extract in asthma was implicated in reductions of IL-4, IL-5 released from Th2 cell, and decreases of IgG, IgE from plasma cell. These findings suggest that deer horn extract can produce anti-asthmatic effect, which may play a role in allergen-induced asthma therapy.

• 전기전자학회논문지
• /
• 제17권2호
• /
• pp.140-144
• /
• 2013

본 논문에서는 새로운 Ka-대역 혼 배열안테나를 제안한다. 제안된 배열구조의 소자안테나는 평판형 마이크로스트립 안테나와 사각형 혼의 두 개 부분으로 구성되며, 평판형 안테나는 원형편파를 위한 모서리가 절단된 평판형 패치구조를 갖는다. 이러한 평판한 패치안테나는 혼에 신호전력을 여기시키기 위한 급전부와 급전된 신호전력을 원형편파로 바꾸는 일종의 편파기 역할을 수행함으로써 도파관 안테나의 크기를 소형활 할 수 있다는 장점을 갖는다. 제안된 혼 안테나 구조를 이용하여, $0.9{\lambda}_0$의 배열간격을 갖는 $1{\times}8$ 배열안테나를 설계 및 제작하였다. 제작된 단일 혼 안테나는 8dBi의 이득과 3dB 기준으로 4.9%의 축비대역폭을 가지며, $1{\times}8$ 배열안테나는 14dBi의 이득과 8.2%의 축비대역폭을 갖는다.

• 한국산학기술학회논문지
• /
• 제20권12호
• /
• pp.94-101
• /
• 2019

본 연구에서는 초음파 용접기의 진동에너지를 모재에 전달하는 금속 용접용 혼의 형상설계를 위해 해석적 기법을 적용하였으며, 20kHz 영역에서 사용되는 한파장 바 형상을 갖는 용접용 혼의 형상설계를 위해 FEM(Finite Element Method)을 사용하였다. 봉의 종진동 이론을 Ansys APDL(Ansys Parametric Design Language)에 적용하여 혼의 형상을 최적화하였다. 적절한 혼의 형상을 도출하기 위해 진동의 입력면과 출력면의 면적비와 혼의 축방향 길이비를 이용하여 총 25가지의 모델을 설계하였으며, Modal 해석과 Harmonic 해석을 통해 균일한 진동특성을 확보하고자 하였다. 스텝 바혼의 끝단부(팁)의 균일도 90%이상을 확보하기 위해 Harmonic 해석을 통해 길이비, 면적비를 결정하였고 이에 따라 혼의 총길이 130mm, 스텝 길이 65mm, 출력단 면적 28.79mm의 혼을 설계하였다. 설계치수를 바탕으로 Titanium (Ti-6Al-4V)-GR5 재료를 이용하여 혼을 제작하였다. 또한, 별도로 구성된 초음파 용접시스템을 이용하여 혼의 끝단부의 진동 진폭률 및 변위특성을 평가하였다. 최적화된 혼의 진폭률은 51%까지 향상됨을 확인하였다. 최종적으로 균일한 종방향 스텝 바혼을 설계하였으며, 끝단부(팁)의 균일도 97.4%이상을 확보하였다.