• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.11
• /
• pp.25-31
• /
• 2009

In this paper we propose an improved energy aware greedy perimeter stateless routing protocol (EAGPSR) for wireless ad hoc network. The existing greedy perimeter stateless routine (GPSR) has some problems with overloaded node and void situation. The improved EAGPSR protocol is proposed to remedy these problems. It also gives the solution for the fundamental problem in geographical routine called void communication. It considers two parameters (Residual Energy of battery and distance to the destination) for the next hop selection. In order to use efficiently limited-energy of node in wireless ad hoc network, network lifetime is focused. To evaluate the performance of our protocol we simulated EAGPSR in ns-2. The simulation results show that the proposed protocol achieves longer network lifetime compared with greedy perimeter stateless routing (GPSR) and the existing Energy aware greedy perimeter stateless routing protocol (EAGPSR).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4B
• /
• pp.422-428
• /
• 2011

In this paper, we introduce system and channel modeling for an underwater ad hoc acoustic network with n regularly located nodes， and then analyze capacity scaling laws based on the model. A narrow-band model is assumed where the carrier frequency is allowed to scale as a function of n. In the network, we characterize in attenuation parameter that depends on the frequency scaling as well as the transmission distance. A cut-set upper bound on the throughput scaling is then derived in extended networks having unit node density. Our result indicates that the upper bound is inversely proportional to the attenuation parameter, thus resulting in a power-limited network. Furthermore, we describe an achievable scheme based on the simple nearest-neighbor multi-hop (MH) transmission. It is shown under extended networks that the MH scheme is order-optimal for all the operating regimes expressed as functions of the attenuation parameter.

• Journal of information and communication convergence engineering
• /
• v.20 no.1
• /
• pp.22-30
• /
• 2022

The reinforcement learning algorithm has proven its potential in solving sequential decision-making problems under uncertainties, such as finding paths to route data packets in wireless sensor networks. With reinforcement learning, the computation of the optimum path requires careful definition of the so-called reward function, which is defined as a linear function that aggregates multiple objective functions into a single objective to compute a numerical value (reward) to be maximized. In a typical defined linear reward function, the multiple objectives to be optimized are integrated in the form of a weighted sum with fixed weighting factors for all learning agents. This study proposes a reinforcement learning -based routing protocol for wireless sensor network, where different learning agents prioritize different objective goals by assigning weighting factors to the aggregated objectives of the reward function. We assign appropriate weighting factors to the objectives in the reward function of a sensor node according to its hop-count distance to the sink node. We expect this approach to enhance the effectiveness of multi-objective reinforcement learning for wireless sensor networks with a balanced trade-off among competing parameters. Furthermore, we propose SDN (Software Defined Networks) architecture with multiple controllers for constant network monitoring to allow learning agents to adapt according to the dynamics of the network conditions. Simulation results show that our proposed scheme enhances the performance of wireless sensor network under varied conditions, such as the node density and traffic intensity, with a good trade-off among competing performance metrics.

• Journal of The Korean Society of Integrative Medicine
• /
• v.10 no.2
• /
• pp.115-123
• /
• 2022

Purpose : The hamstring is a group of three muscles, biceps femoris, semitendinosus, and semimembranosus, placed behind the thigh. The hamstring is one of the most commonly injured muscles and usually occurs during high-speed, high-intensity exercise. The purpose of this study was to investigate the effect of static stretching and eccentric exercise of hamstrings on flexibility, strength, and functional performance. Methods : This study was conducted on 28 healthy adults. Subjects were divided into a static stretching group (n=15) and an eccentric exercise group (n=13). Subjects measured hamstring flexibility (active knee extension test), hamstring strength (concentric and eccentric peak torque), and functional performance (triple hop for distance and modified 20 m sprint). The intervention was conducted three times a week for six weeks. To compare the difference between values before and after the intervention, paired t-test was used, and an independent t-test was used to compare between groups. Results : In both groups, the active knee extension test, concentric peak torque, triple hop test, and 20 m sprint significantly increased after the intervention compared to before the intervention (p<.05). However, no significant difference was found in eccentric peak torque after intervention in both groups (p>.05). No significant difference was found between the two groups in the effect on the variables (p>.05). Conclusion : Both interventions were found to be effective for flexibility, concentric strength, and functional performance. Eccentric exercise and static stretching are recommended to improve the flexibility and functional performance of the hamstring. This study's results will be considered essential data on the effectiveness of static stretching and eccentric exercise.

• Journal of The Korean Society of Integrative Medicine
• /
• v.12 no.3
• /
• pp.49-59
• /
• 2024

Purpose : Chronic ankle instability (CAI) can impair strength and balance, leading to activity limitations and restricted participation. Traditionally, ankle stabilization exercises have been applied, and more recently, the effects of hip muscle exercises have been studied. The purpose of this study was to determine the immediate effects of hip exercises (HE) and ankle stabilization exercises (ASE) on dynamic balance, performance and ankle function in subjects with CAI. We also compared the difference in effectiveness between HE and ASE. Methods : A total of 34 subjects with CAI participated, ane were randomly divided into two groups: the HE group and the ASE group. The HE group performed a program consisting of exercises above 70 % MVIC, while the ASE group performed a traditional ankle stabilization exercise program. The subjects in each group completed their respective exercise program for a total of 30 minutes once a day and were assessed before and after the intervention. Dynamic balance was assessed using the Y-balance test (YBT). Performance was assessed using the hop for distance test (HDT), and side-hop test (SHT). Ankle function was assessed using foot and ankle ability measure (FAAM) questionnaires. Results : YBT, HDT, and FAAM values increased significantly in both groups after the intervention (p<.05), and there was no significant difference between the groups. SHT values decreased significantly in both groups after the intervention (p<.05), and there was no significant difference between the groups. Conclusion : Although no significant superiority was observed between HE and ASE in this study, both exercise programs were effective in improving dynamic balance, performance, and ankle function in subjects with CAI. These findings suggest that both HE and ASE can be suitable interventions for CAI, highlighting the need for individualized treatment plans. Future research is warranted to explore the long-term effects of exercise programs on CAI subjects of different ages and occupational characteristics.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.1
• /
• pp.39-47
• /
• 2015

Objective : The purpose of this study was to investigate the velocity conversion coefficient and invariance for the optimal phase ratio on the performance of the women's triple jump. Methods : Three-dimensional kinematic data were obtained from the three finalists of the women's triple jumper competition at the 2011 Daegu IAAF World Championships. Computer simulations were performed using the biomechanical model of the triple jump to optimize the phase ratio for the longest actual distance for all athletes with altered velocity conversion coefficients. Results : Top elite triple jumpers showed better technical consistency at the phase ratio. Also, no consistent relationship was observed between the loss in horizontal velocity and the gain in vertical velocity across supporting the three phase. In addition, regardless of the magnitude A1, all athletes were optimized with jump-dominated technique. Finally, as the magnitude of A1 increased, the athletes showed better performance. The obtained overall distance jumped showed the longest actual distance when the optimal phase ratio was transferred from hop-dominated to jump-dominated(the step ratio was 30%~31%), and when the optimal phase ratio was transferred from balanced to jump-dominated(the step ratio was 27%~29%). Conclusion : Future studies need to be conducted in order to explore the active landing motion and the inclination angle of the body with the velocity conversion coefficient simultaneously at each supporting phase.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.12
• /
• pp.1298-1306
• /
• 2014

In this paper, we use the ECMA-392 standard, the first cognitive radio networks to meet the demand for IT services in the ship. And, we investigate about the conflicts of devices that support multi-hop network based on the ECMA-392. Therefore, we propose the resolution scheme of CRP reservation conflicts to solve this. The current CRP reservation approaches does not solve the CRP reservation conflicts of ECMA-392 between devices that move at a distance of three hops. Therefore, it is not possible to guarantee the QoS of real time services such as multimedia streaming. So, we provide a new CRP reservation scheme to avoid conflict through a new 2-hop CRP Availability IE and the change of CRP Control field. From the simulation results, we know that the proposed method of 3 hops CRP reservation conflicts resolution improves the throughput of device.

• Journal of Digital Contents Society
• /
• v.15 no.6
• /
• pp.663-673
• /
• 2014

The WBAN technology means a short distance wireless network which provides each device interactive communication by connecting devices inside and outside of body. Standardization on the physical layer, data link layer, network layer and application layer is in progress by IEEE 802.15.6 TG BAN. Wireless body area network is usually configured in energy efficient using sensor and zigbee device due to the power limitation and the characteristics of human body. Wireless sensor network consist of sensor field and sink node. Sensor field are composed a lot of sensor node and sink node collect sensing data. Wireless sensor network has capacity of the self constitution by protocol where placed in large area without fixed position. In this paper, we proposed the efficient addressing scheme for improving the performance of routing algorithm by using ZigBee in WBAN environment. A distributed address allocation scheme used an existing algorithm that has wasted in address space. Therefore proposing x, y and z coordinate axes from divided address space of 16 bit to solve this problems. Each node was reduced not only bitwise but also multi hop using the coordinate axes while routing than Cskip algorithm. I compared the performance between the standard and the proposed mechanism through the numerical analysis. Simulation verified performance about decrease averaging multi hop count that compare proposing algorithm and another. The numerical analysis results show that proposed algorithm reduced the multi hop better than ZigBee distributed address assignment

• Journal of Internet Computing and Services
• /
• v.17 no.6
• /
• pp.17-23
• /
• 2016

In the future network such as Internet of Things (IoT), the number of computing devices are expected to grow exponentially, and each of the things communicates with the others and acquires information by itself. Due to the growing interest in IoT applications, the broadcasting in Opportunistic ad-hoc networks such as Machine-to-Machine (M2M) is very important transmission strategy which allows fast data dissemination. In distributed networks for IoT, the energy efficiency of the nodes is a key factor in the network performance. In this paper, we propose a fuzzy logic based probabilistic multi-hop broadcast (FPMCAST) algorithm which statistically disseminates data accordingly to the remaining energy rate, the replication density rate of sending node, and the distance rate between sending and receiving nodes. In proposed FPMCAST, the inference engine is based the fuzzy rule base which is consists of 27 if-then rules. It maps input and output parameters to membership functions of input and output. The output of fuzzy system defines the fuzzy sets for rebroadcasting probability, and defuzzification is used to extract a numeric result from the fuzzy set. Here Center of Gravity (COG) method is used to defuzzify the fuzzy set. Then, the performance of FPMCAST is evaluated through a simulation study. From the simulation, we demonstrate that the proposed FPMCAST algorithm significantly outperforms flooding and gossiping algorithms. Specially, the FPMCAST algorithm has longer network lifetime because the residual energy of each node consumes evenly.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.1
• /
• pp.79-85
• /
• 2016

Recently, visible light communication(VLC) is being actively researched as green wireless communication services are drawing attention. Currently, VLC mostly uses LED for transmission and PD(Photo Diode) for receiving. However, this kind of system has limited applications. Therefore, we design and propose in this paper, a LED-to-LED two way VLC system that doesn't use PD(Photo Diode). This system has the following features and contributions. First, this system uses just LED at both transmitter and receiver with analog switch, Second, this system support both one-way communication and two way communication together. One way communication can support multi-hop communication. The performance evaluation of the proposed system is conducted at a place with standard light. We test the success or failure of one way communication by changing distance and baud rate while test the success and failure of two way communication by changing distance. We expect that the proposed LED-to-LED system in this paper can be applied for various application fields.