• BMB Reports
• /
• v.34 no.1
• /
• pp.47-50
• /
• 2001

A one-step, two-site enzyme immunoassay was developed for measuring human alpha-fetoprotein (AFP) in serum and amniotic fluid using monoclonal antibodies (McAb) by eliminating the high-dose hook effect. Three McAbs that recognize different epitopes were selected among 16 different clones on the basis of epitope mapping, two for immobilization and one for horseradish peroxidase conjugation. This one-step immunoassay system is more convenient and rapid compared to a conventional two-step sandwich immunoassay system. It did not exhibit the hook effect to around 2.7 mg/ml of AFP, which is probably one of the highest concentrations of AFP in the serum. The dose-response curve of the system was linear to 500 mg/ml of AFP and the system could differentiate as low as 1 mg/ml of AFP The intra- and inter-assay variations were in an acceptable range; 95~104% and 97~105% respectively Its correlation with other commercial systems was around 95%.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2009.03a
• /
• pp.174-174
• /
• 2009

The acromioclavicular-hook-plate is one of the surgical treatments for distal clavicle fracture and traumatic acromioclavicular (AC) joint dislocation. Although this procedure can obtain rigid and accurate anatomical reduction of the AC joint, secondary widening of the hook-hole in the acromion is often seen during postoperative follow-up. This complication is owing to the high-degree of mobility of the AC joint. Therefore, it is important to evaluate the effect on these complications due to the position of the hook-hole. The purpose of the present study is to investigate three-dimensionally the effect due to the position of the hook-hole during arm abduction motion. We studied in vivo and three-dimensional kinematics of the normal shoulder joint with use of a markerless bone-registration technique. Magnetic resonance images of 14 shoulders of 7 healthy volunteers were acquired in 7 positions between $0^{\circ}$ and $180^{\circ}$ of abduction. We created three-dimensional computer models of the bones and the acromioclavicular-hook-plate. Based on the three-dimensional kinematics data, we simulated the widening of the hook-hole each different positioning of the hook-hole. The widths of the hook-holes almost linearly increased. And these widths significantly increased, when we put the hook-hole on the acromion from AC joint to 20 mm and 25 mm posterior position.

• The korean journal of orthodontics
• /
• v.30 no.4 s.81
• /
• pp.387-398
• /
• 2000

This study was aimed to observe the effect of Anterior J hook headgear on the craniofacial structures in mixed dentition with Class II malocclusion. The laterial cephalograms of 20 children treated by Anterior J hook headgear were traced, digitized and statistically analyzed. The results were as follows : 1. Forward growth of maxilla was inhibited. 2. Rotational effect of maxilla was not observed. 3. There was distal movement of maxillary dentition. 4. Maxillarly_dentoalveolar growth changes were more effective in anterior portion than posterior portion. 5. Mandible maintained a normal growth and mandibular plane angle was maintained during treatment period. 6. The ratio of anterior facial height to posterior facial height was almostly not changed.

• Korean Journal of Ichthyology
• /
• v.20 no.2
• /
• pp.105-111
• /
• 2008

A pelagic tuna longline research cruise in the eastern and central Pacific Ocean from September to October of 2006 was conducted to compare catch rates with the use of different hook type and bait combinations. Traditional tuna hooks (J 4) and three circle hook types (C15, C16, C18), along with five bait types (chub mackerel (CM), jack mackerel (JM), milkfish (MF), sardine (SD), and squid (SQ)) and hook number as a proxy for hook depth were evaluated for their effect on bigeye tuna catch rates (fish per 1,000 hooks) using Generalized Linear Models (GLMs). Results from 28 sets indicated significant differences in bigeye catch rates between individual longline sets and hook number. The GLM explained 33% of the deviance in bigeye catch rates with these two factors. An alternative model formulation included bait type which had a small effect (explaining 2.7% of the deviance) on catch rates. Hook type had a negligible and non-significant effect in the GLMs. These results indicate that all of the hooks and baits tested are equally effective at catching bigeye tuna and that hook number (depth) was the paramount operational factor in explaining bigeye tuna catch rates.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 1996.09b
• /
• pp.29-52
• /
• 1996

• Steel and Composite Structures
• /
• v.21 no.3
• /
• pp.461-477
• /
• 2016

Steel-concrete-steel (SCS) sandwich composite wall has been proposed for building and offshore constructions. An ultra-lightweight cement composite with density1380 kg/m3 and compressive strength up to 60 MPa is used as core material and inter-locking J-hook connectors are welded on the steel face plates to achieve the composite action. This paper presents the numerical models using nonlinear finite element analysis to investigate the load displacement behavior of SCS sandwich walls subjected to axial compression. The results obtained from finite element analysis are verified against the test results to establish its accuracy in predicting load-displacement curves, maximum resistance and failure modes of the sandwich walls. The studies show that the inter-locking J-hook connectors are subjected to tension force due to the lateral expansion of cement composite core under compression. This signifies the important role of the interlocking effect of J-hook connectors in preventing tensile separation of the steel face plates so that the local buckling of steel face plates is prevented.

• Korean Journal of Microbiology
• /
• v.39 no.3
• /
• pp.128-134
• /
• 2003

Transformation-associated recombination (TAR) cloning is based on co-penetration into yeast spheroplasts of genomic DNA along with TAR vector DNA that contains 5'- and 3'-sequences (hooks) specific for a gene of interest, followed by recombination between the vector and the human genomic DNA to establish a circular YAC. Typically, the frequency of recombinant insert capture is 0.01-1% for single-copy genes by TAR cloning. To further refine the TAR cloning technology, we determined the effect of GC content on target hooks required for gene isolation utilizing the $Tg\cdot\AC$ mouse transgene as the targeted region. For this purpose, a set of vectors containing a B1 repeated hook and Tg AC-specific hooks of variable GC content (from 18 to 45%) was constructed and checked for efficiency of transgene isolation by radial TAR cloning. Efficiency of cloning decreased approximately 2-fold when the TAR vector contained a hook with a GC content ～${\leq}23$% versus ～40%. Thus, the optimal GC content of hook sequences required for gene isolation by TAR is approximately 40%. We also analyzed how the distribution of high GC content (65%) within the hook affects gene capture, but no dramatic differences for gene capturing were observed.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.6
• /
• pp.429-436
• /
• 2003

The relationship between seeding depth and apical hook opening was investigated in the hypocotyl hook of soybean (Glycine max Merr., cv. Hwanggeum). Seeds were sawn in different depths (2.5, 5.0, 7.5, and 10.0 cm). The hook opening was slowly progressed with seeding depth. Hook angle opening velocity was negatively correlated with hypocotyl growth at the significant level of P<0.01. It was also clearly observed that seeding depth was positively correlated with hypocotyl growth, suggesting the induction of hypocotyl growth by deep sawing. Futhermore, the contents of fructose and glucose in hypocotyls were about higher than in cotyledons. Both sugars in hypocotyls were highest at the emergence stage. After emergence, their levels were obviously reduced. Total soluble sugar contents continuously retained in cotyledons which were grown at 2.5 and 5.0 cm seeding depths whereas the contents in cotyledons of deep sawn soybean were extremely lowered. It seemed that sugars were actively used to cell construction during the hypocotyl elongation. The results demonstrated that apical hook opening is closely related with light signal after emergence. It implied that the delay of hook opening in deep sawn seeds was resulted from hypocotyl growth in darkness. We suggest that apical hook opening is progressed in sucrose catabolism by light.

• Journal of Ocean Engineering and Technology
• /
• v.34 no.5
• /
• pp.285-293
• /
• 2020

This study evaluated the Hook-up installation of an offshore site construction process, which is the final step in an offshore site installation process. During Hook-up installation, the offshore structure can have a detrimental effect on the work stability due to low-frequency motion. Moreover, economic costs can be incurred by the increase in available days of a tugboat. Therefore, this study developed a numerical analysis program to assess the dynamic behavior of mooring systems during hook-up installation to analyze the generally performed installation process and determine when the tugboat should be released. In this program, the behavior of an offshore structure was calculated using Cummin's time-domain motion equation, and the mooring system was calculated by Lumped mass method (LMM). In addition, a tugboat algorithm for hook-up installation was developed to apply the Hook-up procedure. The model used in the calculations was the barge type assuming FPSO (Floating production storage and off-loading) and has a taut mooring system connected to 16 mooring lines. The results of the simulation were verified by comparing with both MOSES, which is a commercial program, and a calculation method for restoring coefficient matrix, which was introduced by Patel and Lynch (1982). Finally, the offset of the structure according to the number of tugboats was calculated using the hook-up simulation, and the significant value was used to represent the calculation result.

• Journal of Korea Foundry Society
• /
• v.23 no.5
• /
• pp.257-267
• /
• 2003

In early solidification during the continuous casting of steel slabs, the formation of oscillation marks on the surface of slabs was mainly affected by carbon contents and casting conditions. The control of oscillation mark is required for the HCR(Hot Charged Rolling) process because the deep oscillation marks seriously deteriorate the surface qualities of steel slabs. The metallographic study has revealed that the oscillation mark can be classified principally according to the presence or absence of a small 'subsurface hook' and the depth of the oscillation marks in the subsurface structure at the basis of individual oscillation marks. The subsurface hook of oscillation marks was either straight or curved. When the amount of overflow was small and the subsurface hook was formed in the top of oscillation marks, the subsurface hook was straight and the oscillation mark was shallow. The oscillation marks without subsurface hook have small early solidification shell and were formed wide. The actual negative strip time$(t_N)$ was changed by the effect of meniscus level fluctuation Therefore irregular early solidification shell and oscillation mark were formed.