• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.7
• /
• pp.1159-1169
• /
• 2003

This paper investigates the effects of T-stress and plastic hardening mismatch on the interfacial crack-tip stress field via finite element analyses. Plane strain elastic-plastic crack-tip fields are modeled with both MBL formulation and a full SEC specimen under pure bending. Modified Prandtl slip line fields illustrate the effects of T-stress on crack-tip constraint in homogeneous material. Compressive T-stress substantially reduces the interfacial crack-tip constraint, but increases the J-contribution by lower hardening material, J$\_$L/. For bimaterials with two elastic-plastic materials, increasing plastic hardening mismatch increases both crack-tip stress constraint in the lower hardening material and J$\_$L/. The fracture toughness for bimaterial joints would consequently be much lower than that of lower hardening homogeneous material. The implication of unbalanced J-integral in bimaterials is also discussed.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.2
• /
• pp.141-147
• /
• 2016

Underwater cavitation is one of the most important issues because it causes not only vibration and erosion of submerged bodies but also significant flow noise problems. In this paper, flow noise due to cavitation flows around the NACA66 MOD hydrofoil is numerically investigated. The cavitation flow simulation is conducted using the Reynolds-Averaged Navier-Stokes equations based on finite difference methods. To capture the cavitation phenomena accurately and effectively, the homogeneous mixture model with the Merkle's cavitation model is applied. The predicted results are compared with available experimental data in terms of pressure coefficients and volume fraction, which confirms the validity of numerical results. Based on flow field analysis results, hydro-acoustic noise field due to the cavitation flow is predicted using the Ffowcs-Williams and Hawkings equation derived from the Lighthill's acoustic analogy. The typical lift dipole propagation patterns are identified.

• The Korean Journal of Mycology
• /
• v.26 no.2 s.85
• /
• pp.135-143
• /
• 1998

Contour-clamped homogeneous electric field gel electrophoresis was used to establish electrophoretic karyotype for 10 species of Fusarium sections Sporotrichiella, Liseola, Gibbosum, Discolor and Martiella. Intact chromosomal DNA was isolated from fungal protoplast and separated under various conditions according to their size in order to improve DNA separation. The numbers of chromosome-sized DNA molecules for individual species ranged from 5-13, with individual chromosomes ranging from 0.78 Mb to 7.20 Mb in size. The total genome DNA size of each species was estimated at about 18.32 Mb to 48.20 Mb. Comparison of karyotype profiles following Southern hybridization analysis with a randomly selected genomic probe of F. oxysporum formae speciales litii was carried out.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.3
• /
• pp.85-90
• /
• 1988

A probabilistic model for the failure in a homogeneous soil slope is presented. The Safety of the slope is measured through its probability of failure rather than the customary factor of safety. The safety margin of slope failure is assumed to follow a normal distribution. Sources of uncertainties affecting characterization of soil property in a homogeneous soil layer include inherent spatial variability., estimation error from insufficient samples, and measurement errors. Uncertainties of the shear strength-along potential failure surface are expressed by one-dimensional random field models. The rupture surface, created at toe of a soil slope, has been considered to propagate towards the boundary along a path following an exponential (log-spiral) law. Having derived the statistical characteristics of the rupture surface and of the forces which act along it, the probability of failure of the slope was found. Finally the developed procedure has been applied in a case study to yield the reliability of a soil slope.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.102-107
• /
• 2001

Interfacial cracks between an isotropic and orthotropic material, subjected to static far field tensile loading are analyzed using the technique of photoelasticity. The fracture parameters are extracted from the full-field isochromatic data and the same are compared with that obtained using boundary collocation method. Dynamic Photoelasticity combined with high-speed digital photography is employed for capturing the isochromatics in the case of propagating interfacial cracks. The normalized stress intensity factors for static crack is greater when $\alpha=90^{\circ}C$ (fibers perpendicular to the interface) than when $\alpha=0^{\circ}C$ (fiber parallel to the interface) and those when $\alpha=90^{\circ}C$ are similar to ones of isotropic material. The dynamic stress intensity factors for interfacial propagating crack are greater when $\alpha=0^{\circ}C$ than $\alpha=90^{\circ}C$. The relationship between complex dynamic stress intensity factor $|K_D|$ and crack speed C is similar to that for isotropic homogeneous materials, the rate of increase of energy release rate G or $|K_D|$ with crack speed is not as drastic as that reported for homogeneous materials.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.5
• /
• pp.29-36
• /
• 2008

Diesel vehicle is growing in importance in light-duty sector as a way of reducing greenhouse gases due to improved fuel economy. Carbon monoxide, gas-phase hydrocarbon and organic fraction of diesel particulates can be oxidized to harmless products using a diesel warm-up catalyst (WCC). This study investigated the effect of a turbocharger and a baffle on flow fields and temperature distributions in the WCC for Diesel vehicles by a numerical analysis. In the case of the WCC with the turbocharger, velocity vectors and temperatures of inlet of the WCC have the relatively homogeneous distributions by the swirl generated from the turbocharger. Velocity vectors and temperatures of inlet of the WCC with the turbocharger and the baffle have the improved distributions in homogeneity compared with the case of the WCC without the baffle. The homogeneous flow field and the temperature distribution in the WCC may contribute to improve the conversion performance of the catalysts.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.1
• /
• pp.87-93
• /
• 2002

The previous RST postulates that the scattering field, within each modal partial wave, comprise of the resonance and the background components. The new RST is recently developed by the product expansion of the scattering functions in the field of acoustics. The new formulation suggests that the scattering coefficients consist of resonance, non-resonance, and their interactional portions. In the scattering problems of acoustic waves, the moduli and phase of the resonance coefficient are obtained correctly by the new RST. In our recent works the new RST was successfully applied to the scattering problem of electromagnetic waves for coated conducting cylinder and sphere. In this paper, the new RST is extended to the 2-dimensional scattering problem of electromagnetic waves for a homogeneous dielectric cylinder, and the numerical results are compared with the previous RST.

• Advances in aircraft and spacecraft science
• /
• v.10 no.1
• /
• pp.83-106
• /
• 2023

In this work, the static behavior of FGM macro and nano-plates under thermomechanical loading. Equilibrium equations are determined by using virtual work principle and local and non-local theory. The novelty of the current model is using a new displacement field with four variables and a warping function considering the effect of shear. Through this analysis, the considered sandwich FGM macro and nanoplates are a homogeneous core and P-FGM faces, homogeneous faces and an E-FGM core and finally P-FGM faces and an E-FGM core. The analytical solution is obtained by using Navier method. The model is verified with previous published works by other models and very close results are obtained within maximum 1% deviation. The numerical results are performed to present the influence of the various parameters such as, geometric ratios, material index as well as the scale parameters are investigated. The present model can be applicable for sandwich FG plates used in nuclear, aero-space, marine, civil and mechanical applications.

• Parasites, Hosts and Diseases
• /
• v.30 no.3
• /
• pp.183-190
• /
• 1992

Molecular karyotyping was applied to Pneumocystis carinii (Pc) from two strains of experimental rats, Sprague Dawley(SD) and Fisher(F), in Korea. Field inversion gel electrophoresis and contour clamped homogeneous electric field electrophoresis resolved 15 chromosomal bands from the Pc. The size of the bands was estimated 270kb to 684kb from SD rats, and 273kb to 713 kb from F rats. The bands of 283 kb from SD rats and of 273 kb from F rats stained more brightly suggesting duplicated bands. Total number of chromosomes was at least 16, and total genomic size was estimated 7×106 bp. All of the bands from F rats hybridized to the probe of repeated DNA sequences of Pc and the band of 448 kb size was proved to contain rDNA sequences, but Pc. chromosome bands from SD rats showed no reactions to the probes. The 2 different karyotypes of p. carinii from 2 strains of rats were maintained consistently for 2 years.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.1
• /
• pp.35-41
• /
• 2016

Based on correlation and least square method, a closed-form algorithm for estimating the location of mixed far-field and near-field source is presented using the Uniform Circular Array (UCA). Recently, for a homogeneous circular arrangement case, a correlation based closed-form algorithm is proposed to estimate 2-D angle (azimuth, elevation) and the extended algorithm is proposed to 3-D location (azimuth, elevation, range). These algorithms assume the far-field source or near-field source only. Therefore, for mixed source localization, the proposed algorithm estimates source location with the assumption of far-field source, and then estimates the range to distinguish the far-field from the near-field source. For both cases, numerical experiments have been performed, which confirmed the validity of the proposed algorithm.