• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.5
• /
• pp.44-51
• /
• 2009

In this paper, an air conditioner peak power control system using electric power line communication has been developed. The air conditioner power control system using RS-485 communication method is hard to install on the existing buildings due to difficulty in cabling, and the system using wireless communication methods has a weak point of not being able to be used in close space, while the developed system has its own advantages of overcoming the above mentioned obstacles. In addition, the system is extended to support not only single-phase electricity system but also three-phase four-wire electricity system, and therefore can be installed anywhere in the domestic environment. The system also has enhanced the ease of deployment, operational stability and economical efficiency by compact circuit design. Considering the current state requiring the energy sayings, the system would greatly contribute to the widespread use of the air conditioner power control system. The superiority in the performance and stability of the system has been proved by the design verification of each component such as remote air conditioner controller, electric power line gateway and so on, and the field test of the whole system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.3
• /
• pp.781-793
• /
• 2010

Recently, owing to the development of ubiquitous sensor network and mobile communication technologies, many studies on healthcare system are being carried out. In this paper, we have designed and implemented a mobile u-Healthcare system based on sensor network. The u-Healthcare system is composed of three components: wireless sensor network at home, healthcare center located at remote site, and gateway which relays sensing physiological signals to healthcare center. In order to measure patient's physiological signal three sensors are used: three channel ECG sensor, pulse oximeter, and blood pressure sensor. Each sensor is mounted on a mote which can send gathered signal to the base node using Zigbee communication protocol. Once the base node receives physiological signal from each sensor, the client in the base node transfers the signal to the healthcare center. The received physiological signal at the healthcare center is analyzed and processed using various algorithms. The processed results are compared to the standard healthcare database and appropriate treatment including dietetics and exercise cure would be sent to the patient as feedback using SMS message or healthcare center web site. Each patient can check and manage one's health state every day using the healthcare system and gain a recovery under the treatments from minor health problems.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.9
• /
• pp.247-260
• /
• 2016

Sensor networks have been used in many applications such as smart home, smart factory, etc. based on sensor data. Sensor networks can change system requirements and architectures depending on their application areas. Currently, sensor network application cases in ocean environments are very rare because the ocean environments have much difficult accessibility more poor conditions, higher wave heights, more frogs, much heavier salinity, etc., compared with ground environments. In this paper, we propose the requirements, architecture and design of a sensor network system for the littoral sea cage culture monitoring and we also introduce its operation results through the development. The developed system based on our research provides users with functionalities to extract, monitor, and manage underwater environmental conditions suitable to littoral sea cage culturing of fishes.

• Journal of KIISE:Information Networking
• /
• v.34 no.1
• /
• pp.62-72
• /
• 2007

Mobile Virtual Private Network (MVPN) provides VPN services without geographical restriction to mobile workers using mobile devices. Coexistence of Mobile IP (MIP) protocol for mobility and IPsec-based VPN technology are necessary in order to provide continuous VPN service to mobile users. However, Problems like registration failure or frequent IPsec tunnel re-negotiation occur when IPsec-based VPN Gateway (GW) and MIP are used together. In order to solve these problems, IETF proposes a mechanism which uses external home agent (x-HA) located external to the corporate VPN GW. In addition, based on the IETF proposal, a mechanism that assigns x-HA dynamically in the networks where MN is currently located was also proposed with the purpose to reduce handover latency as well as end-to-end delay. However, this mechanism has problems such as exposure of a session key for dynamic Mobility Security Association (MSA) or a long latency in case of the handover between different networks. In this paper, we propose a new MVPN protocol in order to minimize handover latency, enhance the security in key exchange, and to reduce data losses cause by handover. Through a course of simulation, the performance of proposed protocol is compared with the existing mechanism.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1380-1386
• /
• 2009

In this paper, we propose a CQS(Calendar Queue Scheduler) architecture which was designed for processing multimedia and timing traffic in home network. With various characteristics of the increased traffic flowed in home such as VoIP, VOD, IPTV, and Best-efforts traffic, the needs of managing QoS(Quality of Service) are being discussed. Making a group regarding application or service is effective to guarantee successful QoS under the restricted circumstances. The proposed design is aimed for home gateway corresponding to the end points of receiver on end-to-end QoS and eligible for supporting multimedia traffic within restricted network sources and optimizing queue sizes. Then, we simulated the area for each module and each memory. The area for each module is referenced by NAND($2{\times}1$) Gate(11.09) when synthesizing with Magnachip 0.18 CMOS libraries through the Synopsys Design Compiler. We verified the portion of memory is 85.38% of the entire CQS. And each memory size is extracted through CACTI 5.3(a unit in mm2). According to the increase of the memory’sentry, the increment of memory area gradually increases, and defining the day size for 1 year definitely affects the total CQS area. In this paper, we discussed design methodology and operation for each module when designing CQS by hardware.

• Journal of Satellite, Information and Communications
• /
• v.11 no.2
• /
• pp.23-28
• /
• 2016

In this paper, we proposed the novel algorithm which controls the resolution of the HDMI(High Definition Multimedia Interface) by the channel estimation from WiFi-AP(Access Point) in the ISM(Industry-Science-Medical) band. The 2.4 and 5 GHz channel models are widely used since they have identical RF property as RSSI(Received Signal Strength Indication). Especially, the performance degradation of signal-transmission and streaming of WiFi will be occurred by the co-channel interference between AP(Access Point) and increased number of smart devices. Therefore, the optimization scheme of video format timing was designed by HDMI-CEC(Consumer Electronics Control) which considers the transmission speed of radio channel. The HDMI resolution, video quality of home-gateway and digital TV and the decision of PIP position can be maintained by the protocols between smart devices and DLNA(Digital Living Network Alliance) via proposed technique.

• Journal of Broadcast Engineering
• /
• v.10 no.2
• /
• pp.182-189
• /
• 2005

In this paper, an asymmetric WDM-EPON transmission scheme is proposed to be used in a high speed access network system, which is required to implement the convergence of broadcast and communication. WDM is used for downstream transmission from OLT to access nodes, satisfying wide bandwidth requirement for broadcasting and various multimedia services. And an EPON scheme, which is cheaper than WDM, is applied to upstream transmission where less bandwidth is required. A transmission test in physical layer was performed successfully and the results are provided. If ONUs are to be used in a home gateway, its protocol should be appropriate to its traffic pattern. Voice is sensitive to a time delay while data is not. A new dynamic bandwidth assignment protocol for PON system, which can cope with various types of data in access network is proposed and its performance is analysed. A maximum cycle time is specified to achieve the QoS of signals sensitive to time delay. And a minimum window is specified to prevent the downstream control signals from uprising. It is shown by simulation that the proposed EPON protocol can provide a better performance than previous ones.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.2083-2090
• /
• 2006

In an proposed Context-Aware SOA(Service Oriented Architecture) based OSGi(Open Service Gateway initiative) platform, Service provider manages relative kinds of services in an integrative basis from various sensors, puts each service in a SOAP (Simple Object access Protocol) message, and register thorn to the UDDI(Universal Description Discovery and Integration) server of service registry, service requester retrivel the specified kinds of services and call them to service provider. Recently most context-aware technologies for ubiquitous home network are mainly putting emphasis on RFID/USN and location-based technology. Because of this, service-oriented architecture researches have not been made enough. Under the environment of an OSGi service platform, various context-aware services are dynamically mapping from various sensors, new services are being offered for the asking of users, and existing services are changing. Accordingly, the data sharing between services provided, management of service life cycle, and the facilitation of service distribution are needed. Taking into considering all these factors, this study has suggested an Context-Aware SOA based eclipse SOA Tools Platform using OSGi platform that can transaction throughtput of more than 546 TPS of distributional Little's Law from ATAM(Architecture Tradeoff Analysis Method) while remaining stable other condition.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.5
• /
• pp.41-48
• /
• 2005

OSGi(Open Service Gateway Initiative) offers a unique opportunity for pervasive computing as a potential framework for achieving interoperability between various sensors, home appliances, and networked devices. The OSGi framework supports a remote installation of a bundle, which is a unit that installs and deploys services. However, in order for the bundle in execution to migrate, a specific form of bundle such a mobile agent, is needed one which is able to move through a heterogeneous network. This paper proposes a method that can manage bundles like these dynamic agents, in order to ensure the mobility of entities in multiple OSGi framework environments. For our purposes, we have designed the mobile agent management system for managing the lifecycle and mobility of agents in the OSGi framework. The mobile agent management system we are proposing implements a bundle form which can perform in an OSGi framework as well as manage autonomous mobile services. As a result, mobility in a pervasive environment will be supported more efficiently.