• 한국정밀공학회지
• /
• 제22권4호
• /
• pp.52-59
• /
• 2005

When a micro hole is machined by EDM with a cylindrical electrode, the hole diameter is different at the inlet and the outlet of the micro hole. The taper shape of the micro hole is caused by not only wear of the electrode but the eroded particles. The eroded particles cause secondary discharge during machining the micro hole. As a result, the diameter of the inlet becomes larger than that of the outlet. In this paper, a new method is proposed to reduce the difference in diameter between the inlet and the outlet of the hole. Observed was that the feed depth and machining time affect the formation of taper shape On this experimental basis, ultrasonic vibration was applied to reduce machining time, and capacitance was changed during machining to use the difference in discharging energy of different capacitances. Using the proposed method, a straight micro-hole was fabricated.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.731-734
• /
• 1997

In this study, a shape optimization is performed for circular and elliptical holes to reduce weight of a plate. It is accomplished in reference to the results of topology optimization of the square plate with circular hole. From the results. it is concluded that the stress values of shape optimization of them are satisfied with 100MPa of constraint condition.

• 한국항공우주학회지
• /
• 제39권7호
• /
• pp.585-595
• /
• 2011

사각형 및 원형 출구 형상 synthetic jet의 수치적 연구를 통하여 유입류가 존재할 경우 평판에서의 유동 구조 및 유동 제어 효과를 분석하였다. 사각형 출구 형상의 경우, jet 직후에 강한 vortex가 생성되지만 주변에 적은 momentum을 공급하기 때문에 유입류 방향으로 갈수록 유동제어 효과가 감소하게 된다. 원형 출구 형상의 경우, 규칙적인 vortex의 형태가 slot 중앙부터 끝까지 나타나고 보다 멀리까지 jet vorticity의 영향이 미치게 된다. 유동제어 효과를 예상하기 위하여 위치 별 wall shear stress를 비교하였다. 이에 원형 출구 형상이 사각형 출구 형상보다 유동제어 효과가 더 클 것으로 판단된다. 또한 최적의 원형 출구 형상을 도출하기 위하여, hole gap과 diameter의 변화에 따른 유동 구조 및 유동 제어 효과를 비교 분석하였다. 그 결과, hole diameter와 gap를 고려하여 원형 출구 형상을 설계할 경우 유동제어 효과를 극대화 할 수 있음을 밝혔다.

• 한국강구조학회 논문집
• /
• 제29권4호
• /
• pp.303-310
• /
• 2017

WUF-W 접합부는 부재의 접합이 모두 용접으로 이루어진 접합부이며, 특수모멘트골조(SMF) 인증접합부 중 하나이다. 하지만 선행 연구들을 통해 일부 WUF-W 접합부 실험체가 4% 층간변위비의 특수모멘트골조(SMF) 요구성능을 만족하지 못하였으며, 이는 액세스 홀 형상과 연관이 있음이 보고되었다. 본 연구에서는 비선형 유한요소 해석을 이용하여 WUF-W 접합부의 요구성능을 만족하기 위한 주요 액세스홀 형상변수의 허용범위를 결정하였다. 또한 WUF-W 접합부 설계과정에서 주요 액세스 홀 형상변수의 타당성을 평가할 수 있는 간단한 경험식을 제안하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.43-48
• /
• 2001

In this study, the characteristics of the surface around a hole on inlet and outlet of product which are manufactured by face mill or end mill cutting with a hole or a pocket in its surface, are investigated. Furthermore, experiment for optimization of process conditions to minimize the change of characteristics of milling cut surface after a hole cutting operation, is implemented. Applying the results in this study to surface manufacturing of mold products whose surface is uneven or metal products made by diecasting, reducing the number of sequence process to obtain fine surface is expected.

• 한국공작기계학회논문집
• /
• 제11권5호
• /
• pp.1-6
• /
• 2002

This study is to investigate the characteristics of the surface around a hole on inlet and outlet of product which are manufactured by face mill or end mill cutting with a hole or a pocket in its surface. Furthermore, experiments for optimization of process conditions to minimize the change of characteristics of milling cut surface after a hole cutting operation are implemented. This result is apply to manufacture of mold products and metal products by diecasting.

• 한국태양에너지학회 논문집
• /
• 제35권1호
• /
• pp.69-80
• /
• 2015

A series of numerical analyses was conducted to predict the thermal performance of a solar air heater depending on the hole configuration and geometry in the absorber plate. The planar dimensions of the prototype were 1 m (W) by 1.6 m (H), and the maximum air flow considered was $187m^3/h$. It was considered that protruding holes with a triangular opening in the absorber plate would invoke turbulence in the air flow to enhance the convection heat transfer. Six different hole configurations were investigated and compared with each other, while the hole opening height was considered as a design variable. Three-dimensional transient analyses were performed with a commercial software package on the airflow and heat transfer in the model. The numerical results were analyzed and compared from the view point of the outlet air temperature and its time response to derive the optimal hole pattern and hole opening height.

• 대한기계학회논문집A
• /
• 제24권9호
• /
• pp.2167-2173
• /
• 2000

The HANARO (High-flux Advanced Neutron Application Reactor) has operated since 1995. The Cold Neutron(CN) hole was implanted in the reflector tank from the design stage. Before a vacuum chamber and a moderator cell for the cold neutron source are installed into the CN hole, it is necessary to measure the exact size of the inside diameter and thickness of the CN hole to prevent the interference problem. Due to inaccessibility and high radiation field in the CN hole, a mechanical measurement method is not permitted. The immersion ultrasonic technique is considered as the best method to measure the thickness and the diameter. The 4 axis manipulator of the 2 channel of a sensor module was fabricated. The transducer of 10 MHz results in 0.03 nun of resolution. The inside diameter and thickness for 550 points of the CN hole were measured using 2 channel ultrasonic sensors. The results showed that the thickness is in the range of 13-6.7 mm and inside diameter is in the range of o 156-165. These data will be a good reference in the design of a cold neutron source facility.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.251-252
• /
• 2010

• 한국컴퓨터그래픽스학회논문지
• /
• 제26권3호
• /
• pp.39-48
• /
• 2020

본 논문에서는 삼각 메쉬의 홀을 채우는 새로운 기법을 제시한다. 첫번째, 임의 모양의 홀을 검출한다. 두번째, 삼각화(triangulation), 세분화(refinement), 공정화(fairing), 스무딩(smoothing) 과정을 통해 소스 및 타겟 홀 패치를 생성한다. 마지막으로, 두 패치 사이의 형상 차이를 분석하고 패치간 블렌딩을 통해 특징이 강조된 홀 패치를 얻는다. 다양한 모양의 홀을 갖는 삼각 메쉬 모델에 홀 채움 기법을 적용하여 모델을 복원함으로써 제안된 기법의 효과성을 입증한다.