Transactions of the Korean Society of Machine Tool Engineers (한국공작기계학회논문집)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

Geometric Characteristics on Workpiece with Hole in Face Milling

구멍이 있는 공작물의 가공시 형상특성

  • 이종선 (대진대학교 기계설계공학과) ;
  • 원종진 (국민대학교 기계·자동차공학부) ;
  • 안운상 (국민대학교 기계·자동차공학부) ;
  • 홍석주 (조선대학교 기계공학과) ;
  • 윤희중 (인천기능대학 자동화시스템과)
  • Published : 2002.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study is to investigate the characteristics of the surface around a hole on inlet and outlet of product which are manufactured by face mill or end mill cutting with a hole or a pocket in its surface. Furthermore, experiments for optimization of process conditions to minimize the change of characteristics of milling cut surface after a hole cutting operation are implemented. This result is apply to manufacture of mold products and metal products by diecasting.

Keywords

References

  1. 절삭가공론 손명환
  2. Annals of the CIRP v.30 no.1 Operation planning based on cutting process model J. Tlusty;S. Smith;C. Zamudia
  3. Annals of the CIRP v.40 no.1 New NC routines for quality in milling M.D. Tsai;S. Takada;M. Inui;F. Kimura;T. SATA https://doi.org/10.1016/S0007-8506(07)61942-8
  4. Fundamentals of Machining and Machine Tools W.A.Knight
  5. 석사학위논문, 국민대학교 밀링가공면의 기하학적인 특성에 관한 연구 박문진
  6. 한국공작기계학회논문집 v.8 no.4 엔드밀에 의한 원통가공시 절삭조건에 따른 진원도의 실험적 연구 김성청;박희견;이응석
  7. 한국공작기계학회논문집 v.7 no.3 머시닝센터에서 볼엔드밀 가공으로 고능률, 고정밀도 제고를 위한 표면 가공조건 윤종학;이종원;정기영;정문섭