• Journal of Periodontal and Implant Science
• /
• 제52권5호
• /
• pp.422-434
• /
• 2022

Purpose: The purpose of this study was to evaluate and compare the healing patterns of 2-mm and 4-mm proximal infrabony defects adjacent to dental implants in canine mandibles. Methods: Four male beagles were used. Two groups were created: a 2-mm group (n=4) and a 4-mm group (n=4) depending on the horizontal dimension of proximal infrabony defects adjacent to implants. Bone healing patterns between the 2 groups were evaluated and compared at 8 and 16 weeks using radiographic, histological, histomorphometric, and fluorescent labelling analyses. Results: According to microcomputed tomography, the median bone volume fraction, bone mineral density, and the percentage of radiographic distance from the defect bottom to the most coronal bone-to-implant contact (radio-mcBIC) were 32.9%, 0.6 g/cm³, and 73.7% (8 weeks) and 45.7%, 0.7 g/cm³, and 76.0% (16 weeks) in the 2-mm group and 57.7%, 0.8 g/cm³, and 75.7% (8 weeks) and 50.9%, 0.8 g/cm³, and 74.7% (16 weeks) in the 4-mm group, respectively. According to histomorphometry, the median bone area fraction, mcBIC and the percentage of BIC amounted to 36.7%, 3.4 mm, and 58.4% (8 weeks) and 49.2%, 3.4 mm, and 70.2% (16 weeks) in the 2-mm group and 50.0%, 3.0 mm, and 64.8% (8 weeks) and 55.7%, 3.0 mm, and 69.6% (16 weeks) in the 4-mm group, respectively. No statistically significant differences were found between the groups for any variables (P>0.05). Conclusions: The proximal defects that measured 2 mm and 4 mm showed similar healing patterns at 8 and 16 weeks, and the top of bone formation in the defects was substantially limited to a maximum of 1.6 mm below the implant shoulder in both groups.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권3호
• /
• pp.243-248
• /
• 2009

Purpose: Rehabilitation of the edentulous posterior maxilla with dental implants often poses difficulty because of insufficient bone volume caused by pneumatization of the maxillary sinus and by crestal bone resorption. Sinus grafting technique was developed to increase the vertical height to overcome this problem. The present study was designed to evaluate the sinus floor augmentation with anorganic bovine bone (Bio-$cera^{TM}$) using histomorphometric and clinical measures. Patients and methods: Thirteen patients were involved in this study and underwent total 14 sinus lift procedures. Residual bone height was ${\geq}2mm$ and ${\leq}6mm$. Lateral window approach was used, with grafting using Bio-$cera^{TM}$ only(n=1) or mixed with autogenous bone from ramus and/or maxillary tuberosity(n=13). After 6 months of healing, implant sites were created with 3mm diameter trephine and biopsies taken for histomorphometric analysis. The parameters assessed were area fraction of new bone, graft material and connective tissue. Immediate and 6 months after grafting surgery, and 6 months after implantation, computed tomography (CT) was taken and the sinus graft was evaluated morphometric analysis. After implant installation at the grafted area, the clinical outcome was checked. Results: Histomorphometry was done in ten patients.Bio-$cera^{TM}$ particles were surrounded by newly formed bone. The graft particles and newly formed bone were surrounded by connective tissue including small capillaries in some fields. Imaging processing revealed $24.86{\pm}7.59%$ of new bone, $38.20{\pm}13.19%$ connective tissue, and $36.92{\pm}14.51%$ of remaining Bio-$cera^{TM}$ particles. All grafted sites received an implant, and in all cases sufficient bone height was achieved to install implants. The increase in ridge height was about $15.9{\pm}1.8mm$ immediately after operation (from 13mm to 19mm). After 6 months operation, ridge height was reduced about $11.5{\pm}13.5%$. After implant installation, average marginal bone loss after 6 months was $0.3{\pm}0.15mm$. Conclusion: Bio-$cera^{TM}$ showed new bone formation similar with Bio-$Oss^{(R)}$ histomorphometrically and appeared to be an effective bone substitute in maxillary sinus augmentation procedure with the residual bone height from 2 to 6mm.

• Journal of Periodontal and Implant Science
• /
• 제29권1호
• /
• pp.1-14
• /
• 1999

Ursodeoxycholic acid(UDCA) is a hydrophilic gall bladder acid and has been used as a effective drug for liver disease related to in1munity. This drug inhibits secretions of IL-2, IL-4, and $IFN-{\gamma}$ from T-cells and production of immunoglobulin from B-cells. Also it has been reported that UDCA inhibits production of IL-1 related to the progression of periodontal disease and activation of collagenases. The purpose of the present study was to elucidate the effects of UDCA on inhibition of periodontal disease progression using clinical, microbiological and histometrical parameters. Twelve pure bred, 16 month-old-beagle dogs were used in the study. After ligature-induced periodontal diseases were formed, experimental drugs were applied twice a day and then the results of clinical, microbiological, and histometrical parameters were measured at baselie(initiation of experiment) , 4weeks and 8weeks. The gel with UDCA(concentration 0.5%, 5% 3 dogs in each) was applied to experimental group, chlorhexidine to positive control group(3dogs) and the gel without UDCA(base) to negative control group. After induction of general anesthesia, the maxillary 2nd, 3rd premolars and 1st molar and the mandibular 2nd, 3rd, 4th premolars and 1st molar were ligated in one side selected randomly and were not ligated in the opposite side. The plaque index(PI), gingival index(GI), pocket depth(PD) and gingival crevicular fluid(GCF) volum were measured clinically. The PI and GI were measured at 3 buccal points of all experimental teeth and the GCF was measured only at the 3rd premolar in the maxilla and the 4th premolar in the mandible. In the microbiological study, the samples extracted from the 3rd premolar of the maxilla and the 4th premolar of the mandible at the center of buccal surface were analyzed aerobics, anaerobics and Streptococcus colony forming units, After clinical and microbiological examination at 8weeks, the dogs were sacrificed by carotid artery perfusion. The samples were fixed and sectioned including interproximal area, and the distance from cementoenamel junction(CEJ) to alveolar crest was measured. The results were that PI, GI and PD increased until 4 weeks and decreased at 8 weeks in three groups but the differences between all the groups were not significant. The 0.5% UDCA in non-ligated group showed remarkable decrease of GCF. The experimental group applied 5% UDCA decreased the number of aerobics and anaerobics. The distance from CEJ to alveolar crest was greater in the negative control group on both ligated and non-ligated sides, but the differences were not significant stastically.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제30권6호
• /
• pp.465-473
• /
• 2004

Purpose : The essential triad for nerve regeneration is nerve conduit, supporting cell and neurotrophic factor. In order to improve the peripheral nerve regeneration, we used polyglycolic acid(PGA) tube and brain-derived neurotrophic factor(BDNF) gene transfected Schwann cells in sciatic nerve defects of SD rat. Materials and methods : Nerve conduits were made with PGA sheet and outer surface was coated with poly(lactic-co-glycolic acid) for mechanical strength and control the resorption rate. The diameter of conduit was 1.8mm and the length was 17mm Schwann cells were harvested from dorsal root ganglion(DRG) of SD rat aged 1 day. Schwann cells were cultured on the PGA sheet to test the biocompatibility adhesion of Schwann cell. Human BDNF gene was obtained from cDNA library and amplified using PCR. BDNF gene was inserted into E1 deleted region of adenovirus shuttle vector, pAACCMVpARS. BDNF-adenovirus was multiplied in 293 cells and purified. The BDNF-Adenovirus was then infected to the cultured Schwann cells. Left sciatic nerve of SD rat (250g weighing) was exposed and 14mm defects were made. After bridging the defect with PGA conduit, culture medium(MEM), Schwann cells or BDNF-Adenovirus infected Schwann cells were injected into the lumen of conduit, respectively. 12 weeks after operation, gait analysis for sciatic function index, electrophysiology and histomorphometry was performed. Results : Cultured Schwann cells were well adhered to PGA sheet. Sciatic index of BDNF transfected group was $-53.66{\pm}13.43$ which was the best among three groups. The threshold of compound action potential was between 800 to $1000{\mu}A$ in experimental groups which is about 10 times higher than normal sciatic nerve. Conduction velocity and peak voltage of action potential of BDNF group was the highest among experimental groups. The myelin thickness and axonal density of BDNF group was significantly greater than the other groups. Conclusion : BDNF gene transfected Schwann cells could regenerate the sciatic nerve gap(14mm) of rat successfully.

• 대한치과보철학회지
• /
• 제51권3호
• /
• pp.190-198
• /
• 2013

연구 목적: 최근 지르코니아 임플란트가 크게 향상된 물리적 성질, 자연치와 유사한 색조, 뛰어난 생체 적합성으로 주목 받고 있다. 이에 본 연구에서는 국내에서 시판되고 있는 상용 타이타늄 임플란트와 개발 단계인 지르코니아 임플란트의 골유착을 비교 연구하였다. 연구 재료 및 방법: 상용 타이타늄 임플란트(T 군)와 기계 절삭된 나사형 지르코니아 임플란트(Z 군), 기계 절삭 후 알루미나 샌드 블라스팅으로 표면 처리된 나사형 지르코니아 임플란트(ZS 군)의 표면 거칠기를 측정한 후 6마리 돼지의 좌, 우측 하지 경골에 식립하여 1주, 4주, 12주에 각각 희생하여 Periotest values (PTVs) 측정, 조직학적 측정 및 조직 계측학적 측정, 주사 전자 현미경 관찰을 시행하였다. 평균 표면 거칠기와 PTVs, 조직계측학적 측정 결과는 일원분산분석을 통해 통계 처리되었다(${\alpha}=.05$). 결과:각 군 임플란트의 표면 거칠기를 측정한 결과 T 군이 Z 군, ZS 군에 비해 더 유의하게 높은 평균 표면 거칠기 값을 보였다. PTVs는 측정 시기 모두에서 T 군이 상대적으로 낮은 값을 보였으나 각 군에 따라, 시기에 따라 모두 통계적으로 유의하지는 않았다. 식립 1주차 골접촉율 측정 결과 Z 군이 T 군, ZS 군에 비해 유의성 있게 높았고, 골면적율은 T 군, Z 군이 ZS 군에 비해 유의성 있게 높았다. 식립 4주차 골접촉율 측정에서 T 군이 Z 군, ZS 군에 비해 유의성 있게 높았고, 골면적율은 군간 유의한 차가 없었다. 식립 12주차 골접촉율은 T 군, ZS 군, Z 군 순으로 낮아졌고 모든 군간 통계적으로 유의한 차이가 존재하였다. 골면적율은 T 군, ZS 군이 Z 군에 비해 유의성 있게 높았다. 결론: 이상의 결과는 지르코니아 임플란트의 골유착이 타이타늄 임플란트에 비해 부족하며, 상용화를 위해서는 지르코니아 임플란트의 표면 변형에 관한 연구가 더 필요함을 시사한다.

• 대한치과보철학회지
• /
• 제48권2호
• /
• pp.122-127
• /
• 2010

연구목적: 본 연구는 machined 임플란트와 골유도능이 있는 calcium phosphate를 electron-beam deposition으로 coating처리한 임플란트의 골/임플란트 접촉률을 조직형태계측학적으로 비교하는 것이다. 연구 재료 및 방법:여섯 마리의 수컷 New Zealand white rabbit과직경3.3 mm, 길이 5 mm의 임플란트 24개를 준비하였다. Machined 임플란트 (대조군)와 calcium phosphate coated 임플란트(실험군)를 좌, 우 경골에 2개씩 총 4개를 식립하고 임플란트 주위에 부하가 가해지지 않도록 하여 3주, 6주의 치유기간을 두었다. 식립 3주와 6주후, 각각 3마리의 토끼를 희생하여 조직시편을 제작하였다. 제작된 시편을 광학현미경 하에서 골/임플란트 접촉률 (BIC ratio)을 계산하고 paired t-test로 두 군을 비교하였다. 결과:골/임플란트 접촉률은 임플란트 식립 3주후, 대조군에서 평균과 표준편차는$44.1{\pm}16.5%$ 이었고 실험군은 $70.8{\pm}18.9%$로 실험군이 통계적으로 유의하게 높았다 (P= 0.0264). 6주후의경우, machined 임플란트는 $78.6{\pm}15.1%$, calcium phosphate coated 임플란트는 $79.0{\pm}26.0%$로 두 군 간 통계적으로 유의한 차이는 없었다. 결론: Calcium phosphate coated 임플란트는 machined 티타늄 임플란트에 비해 빠른 초기 골반응을 나타냈다. 그러므로, 임상적으로 calcium phosphate coated 임플란트를 사용했을 때, 수술 후 치유 기간을 단축하여 조기 부하가 가능할 것으로 사료된다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권2호
• /
• pp.136-142
• /
• 2009

Bone density in the recipient implant site seems to be an important factor for long term success of endosseous implants. Preoperative evaluation of bone density is very helpful to assist the clinician with the treatment planning of implant therapy. Accurate information on bone density will help the surgeon identify suitable implant sites, thereby improving the success rate of the procedure. Purpose; The aim of this study was to evaluate a correlation between bone density measured preoperatively with computerized tomography and histologically measured bone density by bone biopsy. Patients and methods; Twenty seven patients were selected. All the patients were in good health, with no systemic disorder and additional bone graft. Preoperatively the patients underwent CT scanning to evaluate Houmsfield Unit(HU). Each patients wore a surgical template for implant placement. During surgery 2mm in diameter and 6mm in length specimens were taken. Histomorphometric analysis was performed using digitalized image analysis software Axiovision 4.3. Also, the Resonance frequency analysis(RFA) and insertion torque values were recorded. Results; The highest histomorphometric values was found in the posterior mandible $32.3{\pm}3.8$, followed by $29.9{\pm}2.6$ for the posterior maxilla, $29.4{\pm}2.6$ for the anterior maxilla, $28.6{\pm}2.3$ for the anterior mandible(p=0.214). The hounsfield unit was $989.2{\pm}258.1$ in the posterior mandible, $845.0{\pm}241.5$ in the anterior maxilla, $744.5{\pm}92.6$ in the anterior mandible, $697.3{\pm}136.9$ in the posterior maxilla(p=0.045). This results may suggest that there are strong correlation between the histomorphometric values and hounsfield unit(r=0.760, p<0.05). The RF measurements were $81.9{\pm}2.4$ ISQ in the posterior mandible, $79.0{\pm}1.4$ ISQ in the anterior mandible, $78.3{\pm}4.6$ ISQ in the posterior maxilla, $76.5{\pm}5.0$ ISQ in the anterior maxilla(p=0.048). The insertion torque values was $43.2{\pm}4.2\;Ncm$ in the posterior mandible, $42.0{\pm}0.0\;Ncm$ in the anterior mandible, $41.3{\pm}4.1\;Ncm$ in the posterior maxilla, $40.8{\pm}3.8\;Ncm$ in the anterior maxilla(p=0.612). This results may suggest that there are statistical significance between the hounsfield unit and the insertion torque values(r=0.494, p<0.05), the histomorphometric values and the insertion torque values(r=0.689, p<0.05). But there was no correlation between histomorphometric values and ISQ. There was no statistical significance in age and gender effect on parameters. Conclusions; There was significant correlations between bone density and implant stability parameters. The bone density measurements using preoperative CT may help clinicians to predict primary stability before implant insertion, which is associated with implant survival rates.

• 구강회복응용과학지
• /
• 제24권4호
• /
• pp.337-349
• /
• 2008

최적의 골유착을 얻기 위하여 임플란트 디자인의 개선과 다양한 표면처리 방법이 개발되어 왔는데, 특히 최근 알칼리 에칭과 이온 주입법, 양극산화법 등 생화학적인 골유착을 유도할 수 있는 표면개질 방법이 관심의 대상이 되고 있다. 이러한 방법 중 마그네슘 이온을 함유한 전해액속에서 양극산화피막처리한 임플란트(마그네슘 임플란트)를 이용하여 조기 하중의 가능성이 제시된 바 있다. 그러나 마그네슘 임플란트의 경우 장기간의 기능적 하중을 가한 경우에 대한 연구가 부족한 상태이므로, 이에 본 연구에서는 비글견을 이용한 동물실험을 통해 지연하중을 가한 마그네슘 임플란트의 방사선적, 임상 안정성 검사 및 조직형태학적 분석을 시행하여 화학적 표면개질 임플란트의 골조직 반응을 기계가공 임플란트와 비교 평가하고자 하였다. 발치 후 3개월의 치유과정을 가진 비글 성견 6마리의 하악에 좌우 3개씩 실험용으로 제작된 직경 3.75 mm, 길이 10.0 mm의 나사 형태 임플란트 36개를 보편적인 임플란트 시술시 이용하는 식립법을 이용하여 식립하였다. 18개의 대조군은 기계가공만 한 상태였고, 실험군은 마그네슘을 함유한 전해액에서 양극산화 피막처리하였다. 식립 후 3개월 동안의 치유기간 후 이차수술을 실시하였으며, 연결고정하지 않고 단일치 금관수복으로 보철물을 장착하여 하중을 가하였다. 3개월 동안 하중을 가한 후에 희생시켜 비탈회 연마 표본을 제작하여 조직형태 계측학적 분석을 시행하였다. 임플란트 식립시, 이차 수술시, 하중을 가한 1개월, 3개월 후에 변연골 흡수를 평가하기 위해 방사선학적 검사를 실시하였고, 골계면 사이에서의 안정성을 평가하기 위해 공진주파수 수치를 측정하였다. Mann-Whitney U test와 repeated measured ANOVA를 이용하여 95 퍼센트 유의수준으로 통계적 유의성을 확인하였다. 총 36개의 임플란트 중 8개에서 일차 수술 후 골유착의 실패가 나타났으며, 1개는 3개월의 부하 후에 실패 양상이 나타났다. 공진주파수분석결과, 마그네슘 임플란트군은 대조군과는 달리 공진주파수 수치가 증가하다가 다소 감소하는 양상을 보였으며, 하중을 가한 3개월 후에는 두 군의 수치가 비슷하였다. 방사선 사진 분석 결과 두 군 모두 시간에 따른 변연골 흡수량이 증가하였으며, 통계적으로 유의한 차이는 없었다. 조직형태학적인 분석 결과 마그네슘-임플란트가 대조군에 비해 더 높은 수치의 골임플란트 계면접촉율을 보여 주었으나, 나사산내 골면적은 더 낮았다. 그러나 두 군 모두에서 통계적 유의성은 없었다. 이상의 결과에서 지연 하중을 가하는 경우에 있어서 골유착에 대한 마그네슘-임플란트의 효과는 기계가공된 임플란트와 유사하였다. 조기 하중시 더 빠르고 강한 골반응을 보여주던 이전 연구와 종합하여 볼 때, 마그네슘 임플란트는 즉시 또는 조기 하중 가능성을 증진시켜 주며, 지연 하중에서는 생체 적합성이 우수한 타이타늄과 유사한 골유착 정도를 보이는 것으로 사료된다. 그러나 임상적으로 화학적 표면개질 방법의 유용성을 판단하기 위해 다양하고 장기적인 임상 연구가 필요하리라 사료된다.