• Hip & pelvis
• /
• v.35 no.1
• /
• pp.32-39
• /
• 2023

Purpose: A staged revision with placement of a temporary antibiotic-loaded cement spacer after removal of the implant is the "gold standard" for treatment of chronic prosthetic joint infection (PJI). It enables local delivery of antibiotics, maintenance of limb-length and mobility, easier reimplantation. However, bacterial colonization of spacers and mechanical complications can also occur. The aim of this study is to evaluate functional results and infection control in two-stage treatment of total hip arthroplasty (THA) PJI with and without a spacer. Materials and Methods: A retrospective review of 64 consecutive patients was conducted: 34 underwent two-stage revision using a cement spacer (group A), 30 underwent two-stage revision without a spacer (group B). At the final follow-up, functional evaluation of patients with a THA in site, without PJI recurrence, was performed using the Harris hip score (HHS). Measurement of limb-length and off-set discrepancies was performed using anteroposterior pelvic X-rays. Results: Most patients in group B were older with more comorbidities preoperatively. Thirty-three patients (97.1%) in group A underwent THA reimplantation versus 22 patients (73.3%) in group B (P<0.001). No significant differences in limb-length and off-set were observed. The results of functional evaluation performed during the final follow-up (mean, 41 months) showed better function in patients in group A (mean HHS, 76.3 vs. 55.9; P<0.001). Conclusion: The use of antibiotic-loaded cement spacer seems superior in terms of functional outcomes and reimplantation rate. Resection arthroplasty might be reserved as a first-stage procedure in patients who are unfit, who might benefit from a definitive procedure.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.2 s.191
• /
• pp.140-148
• /
• 2007

THRA(Total Hip Replacement Arthroplasty) has been widely used for several decades as a viable treatment of otherwise-unsolved hip problems. In THRA surgery, cement mantle thickness is critical to long-term implant survival of femoral stem fixed with cement. Numerous studies reported thin or incomplete cement mantle causes osteolysis, loosening, and the failure of implant. To analyze the effect of femoral stem rotation on cement thickness, in this study, we select two most popular stems used in THRA. Using CAD models obtained from a 3D scanner, we measure the cement mantle thickness developed by the rotation of a femoral stem in the virtual space created by broaching. The study shows that as the femoral stem deviates from the target coordinates, the minimum thickness of cement decreases. Therefore, we recommend development of a new methodology for accurate insertion of a femoral stem along the broached space. Also, modification of the stem design robust to the unintentional movement of a femoral stem in the broached space, can alleviate the problem.

• Hip & pelvis
• /
• v.34 no.4
• /
• pp.255-261
• /
• 2022

The purpose of this case report and review of the literature is to provide documentation on periprosthetic hip joint infection with Flavonifractor plautii (formerly known as Eubacterium plautii), a strictly anaerobic bacterium, and to report on a successful pathway for management including staged surgical revisions and extended antibiotic therapy. A systematic review of the literature was conducted, which identified this case as only the fifth documented case of human infection with this organism; as a result, conduct of further research is warranted, based on the paucity of reports in the literature addressing anaerobic periprosthetic joint infection.

• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.455-464
• /
• 2004

Total hip arthroplasty(THA) considerably depends on high-experienced doctors because of high difficulty of the operation. Selection of acetabular cup's and femoral implant's position is closely related with success or failure of THA. Nevertheless the selection has usually depended on doctor's eye measurement, which makes the position accuracy of artificial joint lower after THA, often resulting in revision of THA. The present study determined a method to select accurately the position of acetabular cup and femoral implant through surgical simulation with 3D characteristic geometrical information of patient's pelvis and femur. We examined the change of femoral anteversion angle and neck-shaft angle accompanied by the change of acetabular cup's position and the insertion position of femoral implant. As result of analyzing geometrical information through different surgical simulations, we found that it was possible to select the accurate position of acetabular cup and femoral implant. It is expected to help doctors get experienced in THA operation through repetitive surgical simulations using the method suggested in the study.

• Journal of Korean Clinical Nursing Research
• /
• v.26 no.3
• /
• pp.365-373
• /
• 2020

Purpose: The purpose of this study was to evaluate the effect of preoperative warming to prevent hypothermia in surgery for patients undergoing total hip replacement arthroplasty under spinal anesthesia. Methods: A randomized experimental study was conducted. Data were collected at an S University hospital in Gyeonggido from December 3, 2019 to March 31, 2020. A random allocation program was used to randomize participants into intervention and control groups. A total of 90 participants were assigned to the study: 30 people were randomized to a pre-warming group using Bair Hugger forced-air warming blankets(Model 505) 30 minutes before surgery, 30 to a pre-warming group 15 minutes before surgery, or 30 to a control group. The findings from 88 participants were analyzed. For data analysis, χ2 test and ANOVA were used utilizing the SPSS 21.0 program. Results: The pre-warming group 30 minutes before surgery had significantly higher body temperature than the control group, from 30 minutes after inducing anesthesia to the end of anesthesia. Body temperature over anesthesia time showed significant differences among the three groups, but there were no statistically significant differences in interactions between time and groups. Conclusion: Warming patients' body for 30 minutes before surgery was effective in maintaining normal body temperature while preventing intraoperative hypothermia.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.4
• /
• pp.426-432
• /
• 2016

Designing a morphologically well-fitted hip implant to a patient anatomy is desirable to improve surgical outcomes since a commercial ready-made hip implant may not well conform to the patient joint. In this study, biomechanical stability of patient-specific hip implants with two different stem lengths was compared and discussed using a 3D finite element analysis (FEA). The FEA results in this study showed that an increase in stem length brings about more the peaked von-Mises stress (PVMS) in the prosthesis and less in the femur. However the decrease in von-Mises stress in the femur causes stress shielding phenomenon that usually leads to considerable bone resorption. Although, in biomechanical stability point of view, this work recommends the use of smaller stems, the length of stem must be determined by considering both the von-Mises stress and the stress-shielding phenomenon.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.1491-1492
• /
• 2011

• Journal of Biomedical Engineering Research
• /
• v.27 no.6
• /
• pp.402-408
• /
• 2006

The choice of suitable hip implant is one of important factors in the total hip arthroplasty (THA). In clinical view point, an improper adaptation of hip implant might induce abnormal stress distribution to the bone, which can shorten the lifespan of replaced hip implant. Currently, interest in the custom-designed hip implants has increased as studies reveal the significance of geometric shape of patient's femur in modeling and designing the implants. In this study, we have developed custom-designed hip implant models with various sizes, and analyzed the stress distribution in the bone and bone cement using the Finite Element Method. It was found that minimizing the gap between implant stem and femoral cavity is crucial to minimize the stress concentration in the bone.

• Journal of the Korean Society of Radiology
• /
• v.12 no.1
• /
• pp.107-114
• /
• 2018

Long-term complications such as loosening, wear, osteolytic lesion and granulomatous reaction by foreign bodies can occur, after total hip arthroplasty. The implantation alignment effects dislocation and wear, according to its amount and direction. Wear particles in total hip arthroplasty brings about biochemical complications such as osteolysis or send wear. In this sense, it is important to regularly check wear and alignment of total hip replacement. Because the wear in followup of 10 years may remain in a small amount, like a 1 or 2 mm generally, somewhat precise measurement tool has to be established. The wear and alignment measurement softwares commercially available currently lack in project saving or reproducibility. This study suggests a reliable method for the measurement using an X-ray image and a CAD software. The proposed method can be executed only if having a CAD software under most of current general clinical radiographical environment. The proposed was revealed through tests for the method to have accuracy of 0.06 mm with precision of 0.05 mm for wear measurement, and precision of 0.27 degrees for tilt measurement.

• Korean Journal of Clinical Pharmacy
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2014

Objective: Currently, rivaroxaban is widely used clinically for thromboprophylaxis after surgery. However, there are concerns on effectiveness and safety of rivaroxaban for its proper use. We aimed to evaluate the effectiveness and safety of rivaroxaban in orthopaedic patients after total hip replacement surgery in a large medical centre after the preferred formulary was switched from enoxaparin to rivaroxaban. Methods: The study was conducted on the patients who underwent hip arthroplasty surgery at the department of Orthopaedic Surgery at Seoul St. Mary's Hospital, South Korea. Electronic medical records were retrospectively reviewed to identify patients treated with rivaroxaban following total hip replacement between February 2011 and March 2012. Evaluation criteria included indications for use, dose, initiation and duration of therapy, drug interactions, adverse reactions, and status of health care reimbursement. The patients who were on enoxaparin were also reviewed as a reference. Results: We identified 57 patients who received rivaroxaban and 50 who received enoxaparin. All patients were prescribed the drugs for Korean Food and Drug Administration-approved indications. No thromboembolic or bleeding events were observed in either group. However, only 5.3% of rivaroxaban- treated patients had an appropriate length of prophylaxis and only 3.5% began rivaroxaban treatment at the recommended time. Surprisingly, 47.4% of rivaroxaban-treated patients received rivaroxaban despite being ineligible for reimbursement benefits. Conclusion: Rivaroxaban was generally well tolerated clinically. However, the duration of treatment, the time of initiation and patient eligibility for reimbursement require improvements, emphasising the need for education which indicates the area of pharmacists' involvement.