• Environmental and Resource Economics Review
• /
• v.24 no.2
• /
• pp.365-410
• /
• 2015

Block-rate structures are widely used in utility-pricing, including the Korean residential electricity sector. In the case of the current pricing structure, Korean citizens are highly concerned about incurring excessive electricity costs. For these reasons, there have been many discussions concerning mitigation of the strict pricing structure. Existing studies on the residential electricity demand function under block-rate structure have the following three issues - the consumer's budget constraint is non-linear, perceived price under block-rate structure is uncertain, block-rate structure has endogeneity in the price variable. In this context, this paper estimates the residential electricity demand function using micro-level household expenditure data and simulates the impact of alternative block-pricing schedules.

• Korean Journal of Medicinal Crop Science
• /
• v.10 no.5
• /
• pp.409-414
• /
• 2002

This study was carried out in order to investigate the main traits related to photosynthesis by multiple regression analysis. The photosynthetic rate showed more significant increase in shaded leaves of plant than in non-shaded leaves of plant after shading treatment for 44 days. Negative correlation was found between net photosynthetic rate and SLA(specific leaf area). However, the values obtained from the linear equation were different and were highly significance. From the above results, net photosynthetic rate of shading treatment is higher than that of control in the same SLA. We also found that there were correlation between stomatal conductance and SPAD as well as net photosynthetic rate and stomatal conductance. By the multiple regression analysis, SPAD value, SLA, stomatal conductance and leaf water potential showed a higher correlation coefficient of $r=0.848^{**}$. From the results, out of 4 factors(SPAD value, SLA, stomatal conductance, leaf water potential) stomatal conductance was main factor in the view points of partial regressing.

• Journal of Korean Society of Forest Science
• /
• v.89 no.4
• /
• pp.463-469
• /
• 2000

Douglas-fir (Pseudotsuga menziesd Mirb. Franco) is highly regarded as a commercial timber species throughout the world in part due to its fast growth relative to many other species. In this study, basal area per hectare equation for Douglas-fir plantations in Southland of New Zealand has been developed based on medium measurement cycles of permanent sample plots data set. The function was developed using the algebraic difference equation method, and various sigmoid-shaped projection equations were used. Parameter estimation was obtained by non-linear routine of the SAS. As a result, of the functions tested a variant of the Schumacher polymorphic function including site index and thinning term as predictor variables showed the higher precision of the fitting. The results indicate that site index is positively correlated with basal area growth. And the thinning term was found to be useful to increase precision of the model.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1614-1614
• /
• 2001

The sweetness (。Bix) of fruit is the main quality factor contributing to the fruit taste. The brix of the apple fruit can be measured non-destructively by near infrared (NIR) spectroscopy, allowing the sweetness grading of individual apple fruit. However, the fruit quality is influenced by various factors such as growing location, producing year, variety and harvest time etc., accordingly the robust NIR calibration is required. In this experimental results are presented the influence of two variations such as growing location and producing year of apple fruit in establishing of calibrations for sweetness, and developed a stable and highly accurate calibration. Apple fruit (Fuji) was collected every year from 1995 to 1997 in 3 different growing locations (Andong, Youngchun and Chungsong) of Kyungpook in Korea. NIR reflectance spectra of apple fruit were scanned in wavelength range of 1100∼2500nm using an InfraAlyzer 500C (Bran+Luebbe) with halogen lamp and PbS detector. The multiple linear regression and stepwise was carried out between the NIR raw spectra and the brix measured by refractometer to select the best regression equations. The calibration models by each growing district were well predicted to dependent sample set, but poorly predicted to independent sample set. Combined calibration model using data of three growing districts predicted reasonable well to a population set drawn from all growing districts(SEP = 0.69%, Bias=-0.075). The calibration models by each harvest year were not transferable across harvest year, however a combined calibration model using data of three harvest years was sufficiently robust to predict each sample sets(SEP = 0.53%, Bias = 0.004).

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.11
• /
• pp.1015-1025
• /
• 2010

In this present study, we experimentally investigated the effects of electric fields on the characteristics of flames spreading over electric-wires with AC fields. The dependence of the rate at which a flame spreads over polyethylene-insulated wires on the frequency and amplitude of the applied AC electric field was examined. The spreading of the flame can be categorized into linear spreading and non-linearly accelerated spreading of flame. This categorization is based on the axial distribution of the field strength of the applied electric field. The rate at which the flame spreads is highly dependent on the inclined direction of the wire fire. It could be possible to explain the spreading of the flame on the basis of thermal balance.

• Environmental and Resource Economics Review
• /
• v.21 no.4
• /
• pp.893-920
• /
• 2012

This study is to investigate causal relationship between individual life satisfaction and air pollution, using ordered probit model with the KLIPS panel dataset for 1998-2008. As determinants, both individual economic and socio-demographic characteristics are considered. Empirical results show that the degree of air pollution has negative effects on individual life satisfaction. The effects of other variables are similar to those of existing studies. This study found that life satisfaction increases along with income increase. However, at a certain point, the increase of life satisfaction becomes smaller even with an increase in income, indicating non-linear effect. It implies that the Easterlin's paradox can be applied to Korea's case. The increase of the other person's income measured by income per capita in the region where respondent resides has negative effects on life satisfaction. On the other hand, a person who has married, own house, stayed healthy, and highly been educated is likely to have higher life satisfaction. Additionally, a person with many household members, urban resident, unemployed or self-employed are negatively correlated with life satisfaction.

• Computers and Concrete
• /
• v.14 no.5
• /
• pp.577-597
• /
• 2014

This paper aims to develop a prediction model for the hardened properties of waste LCD glass that is used in concrete by analyzing a series of laboratory test results, which were obtained in our previous study. We also summarized the testing results of the hardened properties of a variety of waste LCD glass concretes and discussed the effect of factors such as the water-binder ratio (w/b), waste glass content (G) and age (t) on the concrete compressive strength, flexural strength and ultrasonic pulse velocity. This study also applied a hyperbolic function, an exponential function and a power function in a non-linear regression analysis of multiple variables and established the prediction model that could consider the effect of the water-binder ratio (w/b), waste glass content (G) and age (t) on the concrete compressive strength, flexural strength and ultrasonic pulse velocity. Compared with the testing results, the statistical analysis shows that the coefficient of determination $R^2$ and the mean absolute percentage error (MAPE) were 0.93-0.96 and 5.4-8.4% for the compressive strength, 0.83-0.89 and 8.9-12.2% for the flexural strength and 0.87-0.89 and 1.8-2.2% for the ultrasonic pulse velocity, respectively. The proposed models are highly accurate in predicting the compressive strength, flexural strength and ultrasonic pulse velocity of waste LCD glass concrete. However, with other ranges of mixture parameters, the predicted models must be further studied.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.22 no.4
• /
• pp.253-259
• /
• 2018

Structure behaviors resulting from an earthquake are experimentally simulated mainly through a shaking table test. As for large-scale structures, however, size effects over a miniature may make it difficult to assess actual behaviors properly. To address this problem, research on the hybrid simulation is being conducted actively. This method is to implement numerical analysis on framework members that affect the general behavior of the structure dominantly through an actual scale experiment and on the rest parts by applying the substructuring technique. However, existing studies on hybrid simulation focus mainly on Slow experimental methods, which are disadvantageous in that it is unable to assess behaviors close to the actual level if material properties change depending on the speed or the influence of inertial force is significant. The present study aims to establish a Real-time hybrid simulation system capable of excitation based on the actual time history and to verify its performance and applicability. The hybrid simulation system built up in this study utilizes the ATS Compensator system, CR integrator, etc. in order to make the target displacement the same with the measured displacement on the basis of MATLAB/Simulink. The target structure was a 2-span bridge and an RC pier to support it was produced as an experimental model in order for the shaking table test and Slow and Real-time hybrid simulations. Behaviors that result from the earthquake of El Centro were examined, and the results were analyzed comparatively. In comparison with the results of the shaking table test, the Real-time hybrid simulation produced more similar maximum displacement and vibration behaviors than the Slow hybrid simulation. Hence, it is thought that the Real-time hybrid simulation proposed in this study can be utilized usefully in seismic capacity assessment of structural systems such as RC pier that are highly non-linear and time-dependent.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11B
• /
• pp.1612-1619
• /
• 2001

This paper examines the design, implementation characteristics of a folded dipole active integrated antenna. Our goal was to minimize the physical size of RF circuit and its insertion loss, and to make the high frequency tuning easier by directly integrating the ISM(Industrial Scientific & Medical) band power amplifier and antenna. Non-linear model has been used for highly accurate simulation of the power amplifier. The maximum power level was found by using the Load pull method before an impedance matching was achieved. It is found that the total power-added efficiency(PAE) including the driving amplifier was 31.5% and that the transmit power was 13.7 dBm. We also found that the proposed scheme with the smaller antenna as compared with the existing dipole antenna has 23.7 dB total gain including the antenna gain. The suppression of the second harmonic signal to the fundamental signal with respect to the fundamental signal was found to be more than 30 dBc.

• Journal of the Korea Convergence Society
• /
• v.9 no.6
• /
• pp.53-60
• /
• 2018

In this paper, we described the unknown parameter identification using Dual Extended Kalman Filter for precise control of 2-link manipulator. 2-link manipulator has highly non-linear characteristic with changed parameter thought tasks. The parameter kinds of mass and inertia of system is important to handle with the manipulator robustly. To solve the control problem by estimating the state and unknown parameters of the system through the proposed method. In order to verify the performance of proposed method, we simulate the implementation using Matlab and compare with results of RLS algorithm. At the results, proposed method has a better performance than those of RLS and verify the estimation performance in the parameter estimation.