• Special Issue of the Society of Naval Architects of Korea
• /
• 2009.09a
• /
• pp.80-86
• /
• 2009

In order to improve productivity of large container ship construction, large heat input and/or high productive welding technologies are necessary. This can be achieved by the joint research and cooperation among steel maker, welding consumable company, welding equipment company and ship yards. Two electrodes SAW process is effective the plate butt welding and partial joint welding, while FGB welding process is for the connection of block to block joint. The higher strength and thicker steel is developed, the more reliable welding procedure such as two electrodes EGW including light weight welding equipment should be developed.

• Microbiology and Biotechnology Letters
• /
• v.29 no.2
• /
• pp.96-103
• /
• 2001

Phaffia rhodozyma is the most promising microbial source of astaxanthin production, though wild-type strains are needed to increase the astaxanthin content for commercial production. To increase astaxanthin content for commercial production, a mutant strain of P. rhodozyma was selected and culture conditions of the mutant selected were optimized. P. rhodozyma was treated with mutagenic agent such as NTG, acriflavine, and UV in serial order and carotenoids hyper-producing mutant strain was selected based on the capabilities of cell growth on the agar plate containing chemical inhibitors and carotenoids production. Among the mutants tested, a mutant WS-2 was finally selected. Mutant WS-2 produced 1.26mg carotenoids/g-dry cell weight and this value was about- 4-folds higher than that of wild-type. The optimum culture conditions were $24^{\circ}C$ of temperature, 1.5vvm of aeration and 300rpm of agitation. In the optimized condition, cell and carotenoids concentrations were 7.62g/l and 14.9mg/l, respectively.

• Journal of the KSME
• /
• v.34 no.7
• /
• pp.517-526
• /
• 1994

복합재료가 점차 최근에 항공기에서 이차적인 구조요소에서 일차적으로 힘을 받는 구조물에 사 용됨으로써 두꺼운 복합재료 구조판과 셸의 정확한 동적, 정적거동을 예측하는 것이 중요한 문 제가 되었다. 특히 전산구조역학의 한 분야로서 복합재료 적층판의 문제는 inhomogeneity와 anisotropy 문제를 가지고 있어서 복잡하며 일차구조 (primary structrue)에서는 100장-200장의 적층도 드물지 않게 볼 수 있어서 정확한 계산을 위해서는 방대한 기억용량과 빠른 계산속도를 요구한다. 그러므로 복합재료 적층판의 거동을 정확하고 값싸고 빠르게 계산할 수 있는 이론과 수치방법의 개발이 중요한 문제이다. 이 문제는 E. Reissner, R. K. Kapania & S. Raciti, A. K. Noor & W. S., Burton, L. Librescu & J. N. Reddy, J. N. Reddy 등에 의해서 review가 행하 여졌고 이 분야의 모든 paper들의 비교적 현재까지 연구동향을 잘 묘사하고 있다. 여러 review paper들이 시간흐름상으로 여러 연구들을 잘 정리하고 있으므로 이 글에서는 논문들을 다시 review하는 것이 아니라 지난 20여 년간 이 분야에서 계속되어 온 연구중 주요한 것을 고찰하고 소개하는 것을 그 목적으로 한다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.941-948
• /
• 2006

In this paper, the effect of stiffness on hydroelastic responses of plate-like floating structure under wave loads are studied. Direct method is used for the numerical analysis. In the numerical analysis, structural equation is formulated by finite element method(FEM) and higher order boundary element method(HOBEM) is employed for the analysis of fluid flow. A 1000m-long VLFS(Very Large Floating Structure) is considered in numerical analyses. By analyzing VLFS for various cases of stiffness, the characteristics of hydroelastic responses with the variation of stiffness are investigated.

• Journal of Power System Engineering
• /
• v.12 no.6
• /
• pp.78-82
• /
• 2008

Plastic gears are more and more widely used in many industrial machine elements. Plastic gear has higher properties such as light weight, wear resistance, and vibration absorbing ability than metallic gears. But, in case of using an inaccurate plastic gear, its tooth breakage happen and fatigue life is shortened due to increase of applying load and temperature rising on the tooth flank. Inaccuracy of plastic gears such as pitch circle roundness and tooth profile generates vibration and noise. In this study, an internal plastic gears which is molded by a new injection mold structure are developed. The new mold structure is called the HR3P(hot runner type 3plate mold) that has an improved runner system in order to have good filling balance. As a result from this study, an internal gear with very accurate roundness was developed by using design of experiment.

• Korean Journal of Applied Biomechanics
• /
• v.27 no.2
• /
• pp.149-155
• /
• 2017

Objective: The purpose of this study was to investigate the effects of three visual conditions (eyes opened, eyes closed, and wearing of a head mounted display [HMD]) on single-leg standing through kinematics and kinetic analysis. Method: Twelve college students (age: $24.5{\pm}2.6years$, height: $175.0{\pm}6.4cm$, weight: $69.2{\pm}5.1kg$) participated in this study. The study method adopted three-dimensional analysis with six cameras and ground reaction force measurement with one force plate. The analysis variables were coefficient of variation (CV) of the center of body mass, head movement, ground reaction force, and center of pressure, which were analyzed using one-way analysis of variance with repeated measures according to visual conditions. Results: In most cases, the results of this study showed that the CV was significantly higher in the order of HMD wearing, eyes closed, and eyes opened conditions. Conclusion: Our results indicated that body sway was the largest in the HMD wearing condition, and the risk of falling was high owing to the low stability.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.9
• /
• pp.781-785
• /
• 2000

Chalcogenide glasses are suggested as a candidate for optical recording. In this study, we have investigated the holography recording and reconstruction of the polarization state in chalcogenide As$_{40}$ Ge$_{10}$Se$_{15}$ S$_{35}$ thin films. We have used a He-Ne laser light(633nm) to probe and record of the grating. Also the polarization state of object beam was modulated with a λ/4 wave plate. The polarization state of the +1st order diffracted beam was generated by readout of the grating with a linearly polarized reference beam. It was the same-handed polarization state as the polarization state of the recording beam. The result is shown that the diffraction efficiency of circularly polarized recording represents higher than other polarization state.ate.e.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.836-839
• /
• 2003

In this paper, we briefly introduce the test bench and test method of RWA micro-vibration. TAMAM RWA (Reaction Wheel Assembly) micro-vibration was measured on a KISTLER dynamic plate which can measure time signals of three orthogonal forces and torques simultaneously up to 400Hz, and test data was analyzed. Measured data were evaluated with respect to the wheel spin rate and the static/dynamic unbalances were estimated from the extracted first harmonic component. The estimated static and dynamic unbalances were 0.79gㆍcm and 17.4gㆍ$\textrm{cm}^2$ respectively. The resonance mode and two rocking modes were observed as a results of its frequency analysis. Several higher order harmonic components were observed, which comes from its rotor shape as well as the wheel bearing.

• Journal of KSNVE
• /
• v.6 no.1
• /
• pp.97-106
• /
• 1996

This paper presents systematic study of the experimental application of a free-interfaced component mode synthesis method. In the free-interfaced component mode synthesis method, an error the to truncated higher modes and neglected ineria loadings on a component from the connected component is inherent. Also, it is difficult to directly use experimental modal data in a modal synthesis method which links experimental model to finite-element model because of many inconsistencies between experimentally obtained and analytically obtained modal vectors and missing degrees-of-freedom (DOFs) such as rotational DOFs. In order to solve these problems, three methods, the first one based on attaching auxiliary weights to the connection points, the second one utillizing the normalization of experimental modal vector, and the third one generating smoothed and expanded experimental mode shapes, are studied in this paper. Finally, the study is illustrated for a flat-plate structure by using simulated and measured experimental data.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1997.10a
• /
• pp.126-133
• /
• 1997

For each construction material used, there is certain theoretical limit in sizes. For tall building construction, the reduction in slab weight is the first step to take in order to break such size limits. In this paper, the feasibility of such objective is proven and given by numerical analysis result. For a typical building slab, both concrete and advanced composite sandwich panels are considered. The concrete slab is treated as a special orthotropic plate to obtain more accurate result. For each panel, the deflection under the dead and live loads is compared, since both tensile and compressive strengths of the composites are far more higher than those of concrete. All types of sandwich panels considered, except one case, have weights less than one tenth of that of reinforced concrete slab, with deflections less than that of the concrete slab. The cost analysis result and manufacturing methods will be reported later.