• Advances in aircraft and spacecraft science
• /
• v.9 no.5
• /
• pp.377-400
• /
• 2022

The aim of this work is a numerical comparison (FEM) between lattice pyramidal-core panel and honeycomb core panel for different core thicknesses. By evaluating the mid-span deflection, the shear rigidity and the shear modulus for both core types and different core thicknesses, it is possible to define which core type has got the best mechanical behaviour for each thickness and the evolution of that behaviour as far as the thickness increases. Since a specific base geometry has been used for the lattice pyramidal core, the comparison gives us the opportunity to investigate the unit cell strut angle giving the higher mechanical properties. The presented work considers a detailed FEM modelling of a standard 3-point bending test (ASTM C393/C393M Standard Practice). Detailed FEM modelling addresses to detailed discretization of cores by means of beam elements for lattice core and shell elements for honeycomb core. Facings, instead, have been modelled by using shell elements for both sandwich panels. On lattice core structure, elements of core and facings are directly connected, to better simulate the additive manufacturing process. Otherwise, an MPC-based constraint between facings and core has been used for honeycomb core structure. Both sandwich panels are entirely built of Aluminium alloy. Prior to compare the two models, the FEM sandwich panel model with lattice pyramidal core needs to be validated with 3-point bending test experimental results, in order to ensure a good reliability of the FEM approach and of the comparison. Furthermore, the analytical validation has been performed according to Allen's theory. The FEM analysis is linear static with an increasing midspan load ranging from 50N up to 500N.

• Steel and Composite Structures
• /
• v.28 no.4
• /
• pp.415-426
• /
• 2018

This paper presents a multi-layer finite element for buckling and free vibration analyses of laminated beams based on a higher-order layer-wise theory. An N-layer beam element with (9N + 7) degrees-of-freedom is proposed for analyses. Delamination and slip between the layers are not allowed. Element matrices for the single- and multi-layer beam elements are derived by Lagrange's equations. Buckling loads and natural frequencies are calculated for different end conditions and lamina stacking. Comparisons are made to show the accuracy of proposed element.

• The Korean Journal of Food And Nutrition
• /
• v.34 no.1
• /
• pp.79-87
• /
• 2021

This study was conducted in order to investigate the quality characteristics of MBA wine resulting from treatment with different oak barrel maturation methods. This study focused on the maturation of wine in five different types of barrels, including a stainless-steel maturation barrel, a foreign medium-toasted oak barrel, and domestic light, medium and heavy toasted oak barrels, and looked at the resulting differences in quality characteristics between the wines. All oak barrels used for this study had a capacity of 100 liters. The results of the study revealed that the pH content increased by up to 3.86~3.93% after 9 months, and then decreased after this point. The total anthocyanin content increased up to 152.52~174.95 mg/L during a 6 month maturation period, and thereafter began decreasing in concentration, with overall anthocyanin levels tending to be higher after maturation in foreign oak barrels. Overall, functional elements tended to measure higher after maturation in foreign oak barrels as opposed to maturation in domestic oak barrels. Therefore, these results indicate that it is necessary to improve the production of domestic oak barrels in the future in order to reliably produce wines with higher levels of functional elements.

• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.4
• /
• pp.206-212
• /
• 1999

In order to evaluate the applicability of steel mill slag as a AMD (Acid Mine Drainage) neutralizer and to compare capacity of slag with that of limestone lab scale experiments were conducted. The fixed treatment experiments of AMD with slag and limestone separately for 24 hours under the stagnant condition showed that slag has higher capacity of pH increase and removal of Fe. Al and other trace elements. During the 10 days continuous step experiment the pH has been maintained and any decrease in the removal capacity of Fe and Al has not bun observed. In the trace element removal experiment slag showed higher capacity for removal of Ni, Co. Cu and Zn than limestone. The removal of trace element was more effective in AMD than in distilled water that the pH was adjusted to the same level of AMD (synthetic acid solution). It means that Fe and Al in AMD adsorbed trace elements during or after precipitation as oxide forms. In the size effect experiment, the slag of the smaller size with larger specific surface area exhibited higher capacity of pH increase and removal efficiencies of Fe. Al and other trace elements.

• Economic and Environmental Geology
• /
• v.29 no.4
• /
• pp.495-508
• /
• 1996

This study had three purposes: (1) to investigate dispersion and enrichment level of potentially toxic elements; (2) to identify uranium-bearing minerals in black shales; and (3) to assess the chemical speciation of heavy metals in soils and sediments. Rock, surface soil and stream sediment samples were collected in the Chungjoo area covered with black shales in Korea. These samples were analyzed for multi-elements using INAA and ICP-AES. The maximum abundance of U in black shales is 56 ppm and radioactivity counts up to 240CPM. Molybdenum, V, Ba, Cu, and Pb are enriched in black shales and most of soils show high concentrations of U, Mo, Ba, Cu, Pb and Zn. Concentrations of potentially toxic elements decrease in the order of mountain soil > farmland soil > paddy soil. Enrichment index of soils and sediments are calculated and higher than 1.0 in the black shale area with the highest value of 6.1. In order to identify U-bearing minerals, electron probe micro analysis was applied, and uraninite and brannerite in black shale were found. Uraninite grains are closely associated with monazite or pyrite with the size of $2{\mu}m$ to $10{\mu}m$ in diameter whereas brannerite occurs as $50{\mu}m$ euhedral grains. With the results of sequential extraction scheme, residual fractions of Cu, Pb and Zn in soils are mainly derived from weathering of black shale but Cu, Pb and Zn in sediments are present as non-residual fractions. Lead is predominantly present as oxidizable phase in soils whereas Zn is in exchageable/water-acid soluble phase in sediments.

• Coupled systems mechanics
• /
• v.8 no.1
• /
• pp.71-93
• /
• 2019

Finite element simulations of solid mechanics problems often involve the use of Non-Confirming Meshes (NCM) to increase accuracy in capturing nonlinear behavior, including damage and plasticity, in part of a solid domain without an undue increase in computational costs. In the presence of material nonlinearity and plasticity, higher-order variables are often needed to capture nonlinear behavior and material history on non-conforming interfaces. The most popular formulations for coupling non-conforming meshes are dual methods that involve the interpolation of a traction field on the interface. These methods are subject to the Ladyzhenskaya-Babuska-Brezzi (LBB) stability condition, and are therefore limited in their implementation with the higher-order elements needed to capture nonlinear material behavior. Alternatively, the enriched discontinuous Galerkin approach (EDGA) (Haikal and Hjelmstad 2010) is a primal method that provides higher order kinematic fields on the interface, and in which interface tractions are computed from local finite element estimates, therefore facilitating its implementation with nonlinear material models. The inclusion of higher-order interface variables, however, presents the issue of preserving material history at integration points when a increase in integration order is needed. In this study, the enriched discontinuous Galerkin approach (EDGA) is extended to the case of small-deformation plasticity. An interface-driven Gauss-Kronrod integration rule is proposed to enable adaptive enrichment on the interface while preserving history-dependent material data at existing integration points. The method is implemented using classical J2 plasticity theory as well as the pressure-dependent Drucker-Prager material model. We show that an efficient treatment of interface variables can improve algorithmic performance and provide a consistent approach for coupling non-conforming meshes in inelasticity.

• Geophysics and Geophysical Exploration
• /
• v.15 no.1
• /
• pp.33-38
• /
• 2012

A resistivity method has been applied to wide range of engineering and environmental problems with the help of automatic and precise data acquisition. Thus, more accurate modeling and inversion of time-lapse monitoring data are required since resistivity monitoring has been introduced to quantitatively find out subsurface changes With respect to time. Here, we used the finite element method (FEM) for 3D resistivity modeling since the method is easy to realize complex topography and arbitrary shaped anomalous bodies. In the FEM, the linear elements, also referred to as first order elements, have certain advantages of simple formulation and narrow bandwidth of system equation. However, the linear elements show the poor accuracy and slow convergence of the solution with respect to the number of elements or nodes. To achieve the higher accuracy of finite element solution, high order elements are generally used. In this study, we developed a 3D resistivity modeling program using high order Serendipity elements. Comparing the Serendipity element solutions for a cube model with the linear element solutions, we assured that the Serendipity element solutions are more accurate than the linear element solutions in the 3D resistivity modeling.

• Korean Journal of Hospice Care
• /
• v.7 no.1
• /
• pp.15-28
• /
• 2007

This study was focused on figure out what kinds of elements are influencing on job satisfaction with approach of the educational system. It was also to figure out how work characteristics and role conflicts of employees influence on job satisfaction. Objects of study were employeeswho had been working in Hospice and Palliative medical center at least for 6 months, and they were doctors, nurses, ministers, and welfare workers. Collected materials were analyzed by Frequency Analysis, One-way ANOVA, Correlation Analysis, and SimpleRegression Analysis. Results from study can be summarized like below. The first, job satisfaction of workers in Hospice and Palliative medical center were 3.36, and this numerical value is pretty high over all. For saying from the higher to the lower satisfaction level, there were satisfaction with job itself, satisfaction with co-workers, satisfaction with seniors (superiors), and satisfaction with organizations, on the other hands, satisfaction with salaries was turned out as the lowest level among those. The second, role conflict was 2.63, and it is considered as the medium level. after inquiring into it by elements of role conflict, they felt many environmental difficulties compared to other workers in different fields such as environmental difficulty, role ambiguity, insufficient ability, process obscurity, etc. The third, work environment influencing on job satisfaction are as follows. Professional environment among characteristics of work environment was significant statistically. Job satisfaction of ministers was the highest; others were in the order of doctors, welfare workers, and nurses. For employment history, job satisfaction was higher as they have more and longer job experience including whole professional experience both in hospice and palliative medical center. In addition, participating in hospice and palliative programs, intensive training regularly was significantly. Job Motivation was also significant statistically. Especially, job satisfaction was higher when people decided to work in hospice and palliative medical center because of individual desire (self-realization). Lastly, influence of role conflict on job satisfaction is as follows. Environmental difficulty, role ambiguity, insufficient ability, process obscurity, etc showed the significant meaning statistically, and the lower role conflict was related with the higher job satisfaction. Suggestions for next study based on such results are as follows in order to improve or increase job satisfaction of employees in hospice/palliative medical centers. The first, to expand education opportunity of employees is needed to increase job satisfactionof hospice/palliatives medical centers. Participating in intensive programs and seminars by types of occupation and acquiring professional knowledge are very important since employees are motivated by those activities. For that, developing and activating intensive education/programs by professional occupations are suggested. The second, dividing roles of employees and determining each job's limit clearly in hospice/palliative medical centers are required. For that, study developing standard job regulations is suggested for each professional job. Lastly, developing and providing reasonable salaries is needed because low salaries of hospice/palliative medical centers are the absolute reason lowering job satisfaction. Therefore, this paper suggests improving the salary level of employees of hospice/palliative medical centers and developing practical plan for it.

• Journal of Korea Foundry Society
• /
• v.20 no.5
• /
• pp.336-343
• /
• 2000

The effects of casting variables and alloying elements on the fluidity of thin wall cast stainless steels were investigated. Melts were poured into the sand molds to produce thin wall test castings. The length of it was 245 mm and the thickness varied at the interval of 0.5 in the range of 1.6 to 2.6 mm. For the same casting condition, the fluidities of austenitic stainless steel, ferritic, precipitation hardenable and martensite ones were better in the order. The higher the pouring temperature, the shorter the pouring rate and the better the fluidity were. The fluidity was increased with the addition of Cr and decreased with W and Nb.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.291-295
• /
• 2003

For rapid development of science and economic growth, modern constructs are higher and large in order to use confined areas efficiently. Also, it is very important to manage efficient data for safety and maintenance of those constructs. The estimation for structural safety can be evaluated by structural durability and safety using data which surveys various elements. So, it should be based on synthetic and efficient data which includes various elements with related safety of those structures. Then, it will be managed properly and economically. Accordingly, in this study, we would approach efficient maintenance management using the GIS with data from structural-safety diagnosis.