• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.2 s.150
• /
• pp.187-197
• /
• 2006

The purpose of this study was to search for the effective mass customized fashion design process based on internet shopping, so that a total of fifteen models of mass customized fashion design processes which are different in the customized degree and in the composition of design elements was proposed in this study, and to compare their efficiencies and appropriateness with those of the existing fashion design process. The data was obtained from a survey of 180 Korean females in their twenties and thirties from Nov 17th to 29th, 2002. The results of this study were summarized as follows: First, more than half of the whole respondents appeared to prefer mass customized products. Therefore, the mass customized design process was considered to be applicable to some sectors in the present domestic clothing market. Second, Respondents generally preferred the designs by mass customized design process model to those by existing fashion design process. However, satisfaction on the designs done by the mass customized design process suggesting only one choice to prosumers was lower than that of existing fashion design process. This result suggested that mass customized fashion design process enabling at least two choices should be presented to prosumers in order to increase their design satisfaction. In addition, the design process models suggesting more that three choices presented higher satisfaction than existing fashion design process.

• Journal of Korean Clinical Health Science
• /
• v.1 no.2
• /
• pp.49-57
• /
• 2013

Purpose. This study was purposed to seek for a way to enhance the self-efficacy of students in dental hygiene department at deciding their careers by analyzing the relationship between the self-efficacy and the major satisfaction. Methods. The investigator conducted a survey targeting 253 students attending on dental hygiene departments in two 3-year-graduate colleges and 1 university located in Busan from May 1st to May 30th, 2013. The used research instruments were the major satisfaction questionnaire and the Career Decision-Making Self-Efficacy Scale Short Form(CDMSES-SF). The survey was conducted in self-administered questionnaire. The data was analyzed with SPSS (ver 12.0) and also conducted t-test, ANOVA and multi-regression analysis. Results. It was found that self-efficacy level of students in dental hygiene department was $3.22{\pm}0.38$ point, and their major satisfaction level was $3.27{\pm}0.47$ point. The factors enhancing the self-efficacy of students in dental hygiene department at deciding their careers were identified as the curriculum satisfaction, the relationship satisfaction, and the recognition satisfaction. It was identified that more these elements were increased, the higher the self-efficacy level was enhanced. Conclusions. In order to enhance the self-efficacy of students in dental hygiene department at deciding their careers, it is considered that the curriculum should be organized carefully under reasonable plan, and there should be more active communication between professors and students as well as students each other. Besides there needs some educational programs to inspire the pride and sense of duty for the dental hygiene department.

• Korean Journal of Human Ecology
• /
• v.19 no.5
• /
• pp.845-855
• /
• 2010

This study examined the variables that affect whether consumers change broadband internet services by examining their past experiences and intention to switch carriers by targeting consumers who have switched broadband internet service providers. Among adult consumers who intended to switch broadband providers, 341 people who had experience were subject to logistic regression analysis using SPSS for Windows ver. 17.0 to examine frequencies, means, percentages, and factor analysis. The following results were revealed. First, the targets were currently using broadband internet service in the order Company S > Company L > Company K > others. Excluding the others, Company K had the most conversions (from 96 to 78), followed by Company S (from 107 to 97), and Company L (from 43 to 97), which more than doubled the number of subscribers. The reasons for switching carriers in the past were as follows: for Company K, consumers switched to other companies because of unsatisfactory fee services; for Company S, consumers switched to other companies because of quality, advertising and promotional activities, and commitment periods ending; for Company L, the consumers switched to other companies because of fee, quality, and service; and for other companies, the consumers switched to other services because of unsatisfactory quality. Second, the analysis of the elements that determined whether a consumer will switch broadband internet service providers showed that college graduates and individuals who had switched carriers voluntarily in the past were more likely to switch to a new broadband internet service provider. Furthermore, passive consumers had a higher probability of switching. Moreover, when consumers were less satisfied with the fees and services, there was a greater chance of switching to another company.

• Journal of Environmental Impact Assessment
• /
• v.19 no.6
• /
• pp.633-645
• /
• 2010

As the globalization increased, cultural heritage has been widely used as tourist destination. Traditional temples which have valuable cultural resources are important cultural heritages. It was found that most traditional temples which were used as famous tourist destinations lost their intrinsic religious values because of the intensive tourist uses. Sustainable tourism was introduced as an alternative tourism to the conventional one which could cause the destruction of the intrinsic values. Sustainable tourism represents and encompasses a set of principles balancing between visitor satisfaction, economic revitalization of the area, and the conservation of the heritage resources. The purpose of this study was to evaluate the possibility for the sustainable tourism of cultural heritage (traditional temple) by investigating visitors' satisfaction, revisit intention, and awareness on conservation. In order to perform this purpose, Sin-heung-sa was selected as a study site and 339 visitors participated in the questionnaire survey. The study results are summarized into three important findings. First, it was found that the possibility for the sustainable tourism of Sin-heung-sa was high. Vistors' awareness on conservation is high, but visiting satisfaction was medium-high. Specifically, the awareness for heritage transmission was the highest and the awareness for other conservational dimensions such as need for education, conservation for surrounding area, and respect for environmental capacity were also high. Second, visitors' overall and separate satisfactions were not high. Therefore, it was recommended that management strategies are needed to increase the visitor satisfaction because both conservation and visitor satisfaction are essential elements of successful sustainable tourism. The results revealed that visitors' satisfaction could be enhanced by improving safety of the area, providing diverse travel activities and information, and creating unique atmosphere. Third, the revisit intention was evaluated higher than the overall satisfaction, which showed that the attractiveness and competitiveness of Sin-heung-sa was relatively high. Important determinant attributes for revisit intention were analyzed to be good nature(landscape, valley, the fauna and flora) and network with surrounding tourist destinations.

• Tribology and Lubricants
• /
• v.33 no.6
• /
• pp.288-295
• /
• 2017

In order to improve the efficiency and reliability of the machine, the friction should be minimized. The most widely used method to minimize friction is to maintain the fluid lubrication state. However, we can reduce friction only up to a certain limit because of viscosity. As a result of several recent studies, surface texturing has significantly reduced the friction in highly sliding machine elements, such as mechanical seals and thrust bearings. Thus far, theoretical studies have mainly focused on isothermal/iso-viscous conditions and have not taken into account the heat generation, caused by high viscous shear, and the temperature conditions on the bearing surface. In this study, we investigate the effect of dimple depth and film-temperature boundary conditions on the thermohydrodynamic (THD) lubrication of textured parallel slider bearings. We analyzed the continuity equation, the Navier-Stokes equation, the energy equation, and the temperature-viscosity and temperature-density relations using a computational fluid dynamics (CFD) code, FLUENT. We compare the temperature and pressure distributions at various dimple depths. The increase in oil temperature caused by viscous shear was higher in the dimple than in the bearing outlet because of the action of the strong vortex generated in the dimple. The lubrication characteristics significantly change with variations in the dimple depths and film-temperature boundary conditions. We can use the current results as basic data for optimum surface texturing; however, further studies are required for various temperature boundary conditions.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.3
• /
• pp.231-237
• /
• 2017

Objectives: This study was conducted to determine firefighters' work-related accident rate and investigate the factors affecting their on-site safety. Methods: We developed a web-based self-reported questionnaire designed to inquire into firefighters' work-related accident experience and the factors (4M; Man, Machine, Media, Management) affecting firefighters' on-site safety. We distributed questionnaires to all members of firefighting organizations in South Korea by e-mail and 9,149 were returned, resulting in a response rate of 23.1%. Results: Fifteen point seven percent of the respondents reported work-related injuries within the past one year, and 35.1% answered that current accident investigation reports are not helpful for preventing the same accident from recurring. Among the 4M factors, the one most affecting firefighters' on-site safety in the order of priority is the Man factor, followed by Machine, Media, and Management. However, the results from detailed sub-categorical factors showed some differences. 'Lack of human resources', one of the Management factors, was the most influential (70.3%), followed by 'worn-out equipment' under the Machine factor (67.2%). The viewpoint of elements of the Man factor including 'forgetting instructions' and 'fatigue and illness' were significantly different according to firefighters' rank. The higher the firefighter's rank, the more they answered 'forgetting instructions,' while the opposite was the case for 'fatigue and disease'. Conclusions: The present firefighters' accident investigation report needs to be improved, and the 4M method could prove very useful. In addition, it is necessary to set up a proper firefighters' accident investigation and prevention system.

• Journal of Preventive Medicine and Public Health
• /
• v.50 no.3
• /
• pp.177-187
• /
• 2017

Objectives: Medical students represent a primary target for tobacco cessation training. This study assessed the prevalence of medical students' tobacco use, attitudes, clinical skills, and tobacco-related curricula in two countries, the US and Italy, with known baseline disparities in hopes of identifying potential corrective interventions. Methods: From September to December 2013, medical students enrolled at the University of Bologna and at Brown University were recruited via email to answer survey questions assessing the prevalence of medical students' tobacco use, attitudes and clinical skills related to patients' smoking, and elements of medical school curricula related to tobacco use. Results: Of the 449 medical students enrolled at Brown and the 1426 enrolled at Bologna, 174 Brown students (38.7%) and 527 Bologna students (36.9%) participated in this study. Italian students were more likely to smoke (29.5% vs. 6.1%; p<0.001) and less likely to receive smoking cessation training (9.4% vs. 80.3%; p<0.001) than their American counterparts, even though the majority of students in both countries desired smoking cessation training (98.6% at Brown, 85.4% at Bologna; p<0.001). Additionally, negative beliefs regarding tobacco usage, the absence of formal training in smoking cessation counseling, and a negative interest in receiving specific training on smoking cessation were associated with a higher risk of not investigating a patient's smoking status during a routine history and not offering tobacco cessation treatment to patients. Conclusions: Medical curricula on tobacco-related health hazards and on smoking cessation should be mandatory in order to reduce smoking among medical students, physicians, and patients, thereby improving tobacco-related global health.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.55-55
• /
• 2009

FGB(Flexible Glasswool Backing) Submerged Arc Welding has been one of the main welding processes for one side butt welding in shipbuilding industries, which can efficiently improve the welding productivity by the addition of a supplementary filler metal into the molten weld pool. As recent ships have become larger in size, the application of high tensile and higher grade of steels has been continuously increased. Single pass FGB SA welding process accompanies such a high heat input when welding thick plates that the mechanical properties of weld metal can be dramatically degraded. This study has been performed in order to obtain high toughness and tensile properties of high heat input FGB SA welds, and to evaluate the effect of alloy elements on their mechanical properties. To complete welding 25mm-thick EH36 grade steel plate by single pass, 1.2mm diameter and 1.0mm long cut wires has been distributed in the groove before welding, and three different test coupons have been made using C-1.5%Mn, C-1.8%Mn-0.5%Mo, and C-1.4%Mn-1.7%Ni cut wires to investigate the influence of nickel(Ni) and molybdenum(Mo) on the mechanical properties of welds. Test results showed that the addition of Ni and Mo effectively promotes the formation of Acicular Ferrite(AF), while significantly reducing the amount of Grain Boundary Ferrite(GBF) in weld metal microstructures, which resulted in a beneficial effect on low temperature impact toughness and strength.

• Journal of Korea Foundry Society
• /
• v.6 no.1
• /
• pp.12-19
• /
• 1986

This study was undertaken to understand the formation mechanism of the hard spots in high strength brass. To investigate the behavior of the hard spots in the isothermal liquid state with varying silicon content, the rapidly quenched specimens were obtained by suctioning the melt into the silica tube and water quenching. To examine the growth process of the hard spots with holding time, the unidirectional solidification technique was used. The results of this study are summarized as follows: 1) With the addition of Fe in order to get the effects of grain refinement in high strength brass, the two different type of Fe-rich phases are occurred, which are defined as dendritic and globular phase. The chemical composition of the globular phase was different from that of the dendritic phase in that the globular phase contained Si. 2) With increasing Si content, the Fe-rich phase had a tendency to form globular phase. 3) As the holding time increased in the liquid state, globular was also prone to coalesce. The further growth of globular phase to large size was due to reducing the interfacial energy. 4) The primary phase of copper alloy was nucleated preferentially on the dendritic phase. It was noticeable that the dendritic phase acted as a grain refiner. However, the agglomerate (hard spots) which was composed of the globular phase decreased the mechanical properties of high strength brass. 5) Once the hard spots formed in the high strength brass casting, it was very difficult to remove them. This is due to the fact that their meting temperature is higher than the pouring temperature of high strength brass.

• Journal of Korea Foundry Society
• /
• v.22 no.6
• /
• pp.281-287
• /
• 2002

In order to investigate the variation of microstructure and property of the Electro-slag Remelted M2 steel, microstructure observation, hardness, and bending test were performed by using optical microscope. SEM/EDS, rockwell hardness tester, charpy impact tester and bending tester, respectively. It was revealed that the number of inclusions and content of gas elements(S, O, N) in M2 steel fabricated by ESR process decreased markedly compared to those of AIM. It seems to be due to refining effect of ESR process. The volume fraction of carbides in quenched and tempered specimens after austenitizing at 1150$^{\circ}C$ and 1240$^{\circ}C$ was measured. The volume fraction of grain boundary carbides were found to be similar for both specimens. However, The volume fraction of carbides in grain decreased with an increase of austenitizing temperature. When specimen was austenitized at 1150$^{\circ}C$, grain boundary carbides showed needle like morphology. But, the carbides were broken with an increase of austenitizing temperature. The specimen austenitized at 1240$^{\circ}C$ showed higher hardness and lower bending strength compared to that of 1150$^{\circ}C$. As expected, toughness increased with sub-zero quenching treatment.