• Journal of Global Scholars of Marketing Science
• /
• v.19 no.2
• /
• pp.5-16
• /
• 2009

Against the backdrop of the increasing trend towards economic globalisation, many international firms are indicating that decisions on how to enter foreign markets remains one of the key strategic challenges confronting them. Despite the rich body of literature on the topic, the fact that these challenges have continued to dominate global marketing strategy discourses point to someevident lacunae. Accordingly, this paper considers the variables, categorised in terms of firm contexts (standardisation, market research, competition, structure, competitive advantage) and host country-contexts (economic development, cultural differences, regulation and political risk), which influence the degree of involvement of UK companies in overseas markets. Following hypotheses were drawn from literature review: H1: The greater the level of competition, the higher the degree of involvement in the overseas market. H2: The more centralised the firm's organisation structure, the higher the degree of involvement in the overseas market. H3a: The adoption of a low cost-approach to competitive advantage will lead to a higher degree of involvement. H3b: The adoption of an innovation-approach to competitive advantage will lead to a higher degree of involvement. H3c: The adoption of a market research approach to competitive advantages will lead to a higher degree of involvement. H3d: The adoption of a breadth of strategic target-approach to competitive advantage will lead to a lower degree of involvement. H4: The higher the degree of standardisation of the international marketing mix the higher the degree of involvement. H5: The greater the degree of economic development in the host market, the higher the degree of involvement. H6: The greater the cultural differences between home and host countries, the lower the degree of involvement. H7: The greater the difference in regulations between the home country and the host country, the lower the degree of involvement. H8: The higher the political risk in the host country, the lower the degree of involvement. A questionnaire instrument was constructed using, wherever possible, validated measures of the concepts to serve the aims of this study. Following two sets of mailings, 112 usable completed questionnaires were returned. Correlation analysis and multiple regression analysis were used to analyze data. Statistically, the paper suggests that factors relating to the level of competition, competitive advantages and economic development are strong in influencing foreign market involvements. On the other hand, unexpectedly, cultural factors (especially individualism/collectivism and low and high power distance dimensions) proved to have weak moderating effects. The reason for this, in part, is due to the pervading forces of globalisation and the attendant effect on global marketing. This paper has contributed to the general literature in a way that point to two mainimplications. First, with respect to research on national systems, the study may hold out some important lessons especially for developing nations. Most of these nations are known to be actively seeking to understand what it takes to attract foreign direct investment, expand domestic market and move their economies from the margin to the mainstream global economy. Second, it should be realised that competitive conditions remain in constant flux (even in mature industries and mature economies). This implies that a range of home country factors may be as important as host country factors in explaining firms' strategic moves and the degree of foreign market involvement. Further research can consider the impact of the home country environment on foreign market involvement decisions. Such an investigation will potentially provide further perspectives not only on the influence of national origin but also how home country effects are confounded with industry effects.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.88-91
• /
• 2002

The two dimensional size effect of specimen gauge section (length x width) was investigated on the compressive behavior of a T300/924 [45/-45/0/90]3s, carbon fiber-epoxy laminate. A modified ICSTM compression test fixture was used together with an anti-buckling device to test 3mm thick specimens with a 30$\times$30, 50$\times$50, 70$\times$70, and 90mm$\times$90mm gauge length by width section. In all cases failure was sudden and occurred mainly within the gauge length. Post failure examination suggests that $0^{\circ}$ fiber microbuckling is the critical damage mechanism that causes final failure. This is the matrix dominated failure mode and its triggering depends very much on initial fiber waviness. It is suggested that manufacturing process and quality may play a significant role in determining the compressive strength. When the anti-buckling device was used on specimens, it was showed that the compressive strength with the device was slightly greater than that without the device due to surface friction between the specimen and the device by pretoque in bolts of the device. In the analysis result on influence of the anti-buckling device using the finite element method, it was found that the compressive strength with the anti-buckling device by loaded bolts was about 7% higher than actual compressive strength. Additionally, compressive tests on specimen with an open hole were performed. The local stress concentration arising from the hole dominates the strength of the laminate rather than the stresses in the bulk of the material. It is observed that the remote failure stress decreases with increasing hole size and specimen width but is generally well above the value one might predict from the elastic stress concentration factor. This suggests that the material is not ideally brittle and some stress relief occurs around the hole. X-ray radiography reveals that damage in the form of fiber microbuckling and delamination initiates at the edge of the hole at approximately 80% of the failure load and extends stably under increasing load before becoming unstable at a critical length of 2-3mm (depends on specimen geometry). This damage growth and failure are analysed by a linear cohesive zone model. Using the independently measured laminate parameters of unnotched compressive strength and in-plane fracture toughness the model predicts successfully the notched strength as a function of hole size and width.

• Journal of Dairy Science and Biotechnology
• /
• v.33 no.1
• /
• pp.27-34
• /
• 2015

The aim of this study was to optimize a simple, fast, and economic analytical method for the simultaneous determination of various pesticides (aldrin, p,p'-DDT, o,p'-DDT, p,p'-DDE, ${\alpha}$-endosulfan, ${\beta}$-endosulfan, dieldrin, heptachlor, permethrin, chlordane, deltamethrin, diazinon, bifenthrin, methoprene, propargite, fenpropathrin, cypermethrin, fenvalerate, and fenpropathrin) in milk by using dispersive solid phase extraction (SPE). In this study, two different extraction methods (low temperature cleanup and liquid-liquid partitioning), which were followed by a cleanup process based on dispersive-SPE, were evaluated and compared for the 19 pesticides. The results for all the pesticides were determined by gas chromatography mass spectrometry (GC/MS) with selected-ion monitoring mode, and the matrix effect of the method was evaluated. Comparison of these approaches yielded higher and more consistent recoveries of most pesticides at fortification levels of $1{\mu}g/mL$ using low-temperature fat precipitation, followed by cleanup process based on dispersive-SPE with PSA and C18 as sorbents, than other preparation process. The relative standard deviation was <20 % and the combination of this method were very effective for the cleanup.

• Journal of the Korea Computer Industry Society
• /
• v.8 no.2
• /
• pp.97-102
• /
• 2007

[ $CO_2$ ] laser sees that is most suitable to get this effect through minimum formation damage and advantage that is root enemy of effect that happen in minimum cellular tissue depth of 0.1mm is stable living body organization or internal organs institution. Formation damage by ten can be related in formation's kind or energy density, length of evaporation time. If shorten evaporation time, surroundings cellular thermal damage 200 - because happen within 400um laser beam in rain focus sacred ground surroundings cellular tissue without vitiation me by evaporation Poe of very small floor as is clean steam can . Application is possible to vulva cuticle cousins by a paternal aunt quantity, uterine cancer, cuticle tumor by laser system that $CO_2$ laser gets into standard in obstetrics and gynecology application. Because effect that super pulse output is ten enemies of laser if uniformity one pulse durations are short almost is decreased, most of all pulse module special quality of Pulse style $CO_2$ laser for obstetrics and gynecology mode stabilization by weight very, in this research to get into short pulse duration and higher frequency density, do switching by high frequency in DC-DC Converter output DC's ripple high frequency to be changed, high frequency done current ripple amount of condenser for output filter greatly reduce can . Ripple of output approximately to Zero realization applying possible inductor realization through a special quality experiment do.

• Clinical and Experimental Reproductive Medicine
• /
• v.27 no.1
• /
• pp.39-46
• /
• 2000

Objective: A number of studies to improve in vitro culture conditions have been tried over past ten years by using co-culture system with helper somatic cells. However, the mechanism of coculture is poorly understood. This study was designed to understand the mechanism for the mode of actual action of co-culture using co-culture system of ICR strain's 1-cell embryos with human oviduct epithelial cells by examining the effect of conditioned medium and contactless coculture using a cell culture insert on the embryo development and by measuring the level of superoxide anion from conditioned medium after co-culture. Methods: ICR strain's zygote embryos were cultured in medium alone (control), coculture, conditioned medium, or contactless coculture system for 6 days. Conditioned media (CM) were prepared as following 5 groups. All CM were collected after culturing oviduct cells for 2 days. CM-1 was stored at $-20^{\circ}C$ until use, and CM-2 was prepared just before use as a culture medium. CM-3 was cocultured with embryos and retrieved just before use. CM-4 and CM-5 were derives from the microfilteration of CM-2 and CM-3, respectively, using Microcon-10 (10 kDa molecular weight cut-off). The percentage of the embryos developed to hatched blastocyst stage and the level of superoxide anion in supernatant from medium alone culture (control), coculture, and contactless coculture were measured. Results: The rates of embryo development to the hatched blastocyst stage were significantly higher in coculture (43%) than in control (0%) (p<0.05). The CM-1 group had no embryo development since 2-cell embryonic stage, whereas the CM-2, CM-3, CM-4 and CM-5 groups had the improved development to 4 or 8 cell embryo stage, but the similar rate of development to hatched blastocyst compared to control. The effect of coculture on embryo development was disappeared in the contactless coculture group. The level of superoxide anion was significantly reduced in coculture group compared to control. Conclusion: It is concluded that the present coculture system overcomes the 2-cell block in vitro and improves the embryo development. This beneficial effect may be due to the direct cell-cell contact between embryo and helper cells or the removal of deleterious components from medium rather than the embryotrophic factors.

• Journal of Animal Science and Technology
• /
• v.47 no.4
• /
• pp.565-572
• /
• 2005

An experiment was conducted to determine the effect of supplementation of insoluble dietary fiber (Vitacel®) on growth performance and nutrient digestibility in weanling pigs. A total of 96 pigs that averaged 6.49$\pm$0.52kg BW and 23$\pm$2.1d age were allocated in a randomized block design with two pigs per pen and 12 pens per treatment. Pigs and feeders were weighed 10-days interval for the 40-d trials to determine ADG, ADFI and feed:gain ratio(F:G). Pigs were fed one of four diets:1) Control diet (C) 2) C+0.3% insoluble dietary fiber(IDF) 3) C+0.6% IDF and 4) c+0.9% IDF. For the determination of fecal nutrients digestibility, pigs were fed diets(diet 2) with 1% Celite-545(Fluka) as a marker and feces were collected on $9^{th}$ day and $18^{th}$ day after feeding diet 2. During the whole experimental period, pigs fed diet with 0.3% IDF have significantly higher ADG than other dietary treatment groups(P<0.05). ADG of pigs fed diet with 0.6% IDF was higher than that of pigs fed control diet(P<0.05). However, there was no significant difference in ADG between control group and 0.9% IDF group(P>0.05). ADFI of pigs fed diet with 0.3% IDF was significantly higher than any other dietary treatment groups(P<0.05). There was no significant difference in ADFI among control group, 0.6% and 0.9% IDF supplementation groups (P>0.05). Digestibilities of organic matter, crude protein, crude fiber and energy were significantly higher in 0.3% IDF supplementation group than any other dietary groups. However, there was no difference in over all nutrient digestibilities between 0.6% and 0.9% IDF group. Feeding diets more than 0.6% IDF did not affect the rest of the nutrients digestibilities except for ADF digestibility compared to control diet. Dietary supplementation level of IDF showed a significant quadratic effect on performance improvement of piglets. This response of growth performance to IDF supplementation is, as expected, in agreement with that of nutrient digestibility. Our results showed that IDF supplementation to diet for weaned piglets might be beneficial in terms of growth and nutrient digestibility. However, there should be more study on the relationship between level of IDF supplementation and piglet response as well as the exact mode of action of IDF in weaned piglets.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.1
• /
• pp.39-46
• /
• 2021

The quantitative measurement of interfacial adhesion energy (Gc) of multilayer thin films for Cu interconnects was investigated using a double cantilever beam (DCB) and 4-point bending (4-PB) test. In the case of a sample with Ta diffusion barrier applied, all Gc values measured by the DCB and 4-PB tests were higher than 5 J/㎡, which is the minimum criterion for Cu/low-k integration without delamination. However, in the case of the Ta/Cu sample, measured Gc value of the DCB test was lower than 5 J/㎡. All Gc values measured by the 4-PB test were higher than those of the DCB test. Measured Gc values increase with increasing phase angle, that is, 4-PB test higher than DCB test due to increasing plastic energy dissipation and roughness-related shielding effects, which matches well interfacial fracture mechanics theory. As a result of the 4-PB test, Ta/Cu and Cu/Ta interfaces measured Gc values were higher than 5 J/㎡, suggesting that Ta is considered to be applicable as a diffusion barrier and a capping layer for Cu interconnects. The 4-PB test method is recommended for quantitative adhesion energy measurement of the Cu interconnect interface because the thermal stress due to the difference in coefficient of thermal expansion and the delamination due to chemical mechanical polishing have a large effect of the mixing mode including shear stress.

• Restorative Dentistry and Endodontics
• /
• v.33 no.2
• /
• pp.148-161
• /
• 2008

The purpose of this study was to evaluate the effect of chlorhexidine (CHX) on microtensile bond strength (${\mu}TBS$) of dentin bonding systems. Dentin collagenolytic and gelatinolytic activities can be suppressed by protease inhibitors, indicating that MMPs (Matrix metalloproteinases) inhibition could be beneficial in the preservation of hybrid layers. Chlorhexidine (CHX) is known as an inhibitor of MMPs activity in vitro. The experiment was proceeded as follows: At first, flat occlusal surfaces were prepared on mid-coronal dentin of extracted third molars. GI (Glass Ionomer) group was treated with dentin conditioner, and then, applied with 2 % CHX. Both SM (Scotchbond Multipurpose) and SB (Single Bond) group were applied with CHX after acid-etched with 37% phosphoric acid. TS (Clearfil Tri-S) group was applied with CHX, and then, with adhesives. Hybrid composite Z-250 and resin-modified glass ionomer Fuji-II LC was built up on experimental dentin surfaces. Half of them were subjected to 10,000 thermocycle, while the others were tested immediately. With the resulting data, statistically two-way ANOVA was performed to assess the ${\mu}TBS$ before and after thermo cycling and the effect of CHX. All statistical tests were carried out at the 95 % level of confidence. The failure mode of the testing samples was observed under a scanning electron microscopy (SEM). Within limited results, the results of this study were as follows; 1. In all experimental groups applied with 2 % chlorhexidine, the microtensile bond strength increased, and thermo cycling decreased the micro tensile bond strength (P > 0.05). 2. Compared to the thermocycling groups without chlorhexidine, those with both thermocycling and chlorhexidine showed higher microtensile bond strength, and there was significant difference especially in GI and TS groups. 3. SEM analysis of failure mode distribution revealed the adhesive failure at hybrid layer in most of the specimen. and the shift of the failure site from bottom to top of the hybrid layer with chlorhexidine groups. 2 % chlorhexidine application after acid-etching proved to preserve the durability of the hybrid layer and microtensile bond strength of dentin bonding systems.

• Microbiology and Biotechnology Letters
• /
• v.31 no.3
• /
• pp.211-215
• /
• 2003

When Saccharomyces cerevisiae MTY62, a high-RNA content yeast, was cultivated by fed-batch mode feeding molasses and com steep liquor, the cell density less than 45g-DCW/L and the RNA content less than 140mg/g-cell were obtained, indicating that unknown compounds inhibiting the cell growth and RNA accumulation are contained in the molasses. Therefore, in order to obtain higher levels of cell density and RNA content, $Ca^{++}$, $Cu^{++}$and $K^{+}$ ions in molasses were removed by pretreatments of molasses with various agents such as IonClear BigBead, $Na_2$$HPO_4$, $H_2$$SO_4$, citric acid, $K_2$$HPO_4$, and EDT A. Among them, IonClear BigBead, $Na_2$$HPO_4$, and EDTA gave the highest $Ca^{++}$ removal efficiency of about 60-90%. In the batch culture with pretreated molasses, the cell concentration of 18.6g-DCW/I and RNA concentration of 3127 mg/I, maximum specific growth rate of 0.459$h^{-1}$ , and specific consumption rate of reducing sugar of 1.28g-sugar/g-cell-h were obtained, which are about 10%, 17%,47%, and 36% higher levels, respectively, over the batch culture with untreated molasses.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.518-526
• /
• 2017

This study analyzed the impact of family firms and their characteristics on how they use debts to analyze the decision-making process of Korean family firms. For analysis, we classified the characteristics of family firms into three categories, through the influence of the relationship between the lack of funds and net debt issuance, which was confirmed as the 'packing order theory' of family firms. There was a total of 4,503 enterprises in the Korean Exchange (KRX). The period of analysis was 10 years, between 2004 and 2014. To summarize, Shyam-Sunder and Myers (1999) validated the packing order theory by presenting a model of family businesses that showed greater applicable to higher packing order theory than a model of non-family businesses. Moreover, the results also confirmed the application of the packing order theory by the family stronger corporate governance and ownership structure. The ownership and governance characteristics of the ruling family has also shown the applicability of higher packing order theory.