• Transactions on Electrical and Electronic Materials
• /
• v.1 no.1
• /
• pp.6-11
• /
• 2000

The hydrogen plasma treatment of silicon wafers in the reactive ion-etching mode was studied for the application to silicon-on-insulator wafers which were prepared using the wafer bonding technique. The chemical reactions of hydrogen plasma with surface were used for both surface activation and removal of surface contaminants. As a result of exposure of silicon wafers to the plasma, an active oxide layer was found on the surface. This layer was rendered hydrophilic. The surface roughness and morphology were examined as functions of the plasma exposing time and power. In addition, the surface became smoother with the shorter plasma exposing time and power. The value of initial surface energy estimated by the crack propagation method was 506 mJ/㎡, which was up to about three times higher as compared to the case of conventional direct using the wet RCA cleaning method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.883-886
• /
• 2001

The mechanical properties such as the Young's modulus, damping ratio, vibration mode and hardness of the disk materials heat-treated under various conditions are measured, and the relations between there properties and the cutting characteristics such as early tip fracture are examined. The results obtained from this study are as follows. The circular saw with the V-Cr added disk has higher young's modulus and damping ratio than the saw with STC5 disk, preventing the early fracture of tungsten carbide due to the above properties. The circular saw with the disk which is subjected to the heat treatment at the quenching temperature of $830^{\circ}C$ and at the temperature of $550^{\circ}C$ have the best tool life and surface roughness.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.3
• /
• pp.354-358
• /
• 1998

The influence of hot water extracts and tannin obtained from persimmon leaves on xanthine oxidase were investigated. Above two samples had higher inhibitory effect against xanthine oxidase by hot water extracts and tannin obtained from persimmon leaves was 92.4% and 92.1% by addition of 2.0 mg/$m\ell$ of the hot water extracts and the tannin, respectively. The inhibitions by the hot water extracts and the tannin were of competitive mode with respect to xanthine as a substrate.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.3
• /
• pp.65-75
• /
• 1998

We consider connection-oriented wireless cellular networks such as the second generation wireless cellular networks and wirelss ATM networks. In these networks, a separate forward signaling channel is provided for the transmission of paging and channel allocation packets. When a call destined to a user is requested, all the base stations in the user's current location area broadcast the corresponding paging packet across forward signaling channels. By slot mode operation and paging group allocation for fusers in a location area, we can reduce relative power consumption level at battery-operated terminals. However, a sthe number of paging groups is increased for lowering relative power consumption level, a paging packet experiences higher delay to access the forward signaling channel. For the pre-negotiated quality-of-service level, paging packet delay level must be limited. In this paper, we consider static and dynamic multiplexing schemes for paging packets, and develop an analytical method for calculating paging packet delay and relative power consumption levels. Using this analytial method, we investigate the effect of network parameters on the paging packet delay and relative power consumption levels.

• Journal of the Optical Society of Korea
• /
• v.14 no.4
• /
• pp.337-341
• /
• 2010

A high sensitivity fiber optic temperature sensor based on a side-polished fiber (SPF) coupled to a tapered multimode overlay waveguide (MMOW) is proposed and studied. Both tapered and non-tapered MMOW were considered to study the effect of tapering of MMOW on the characteristics of the device and to investigate the criticality of the uniformity of the multimode overlay waveguide over the SPF. Present study shows that tapering of the MMOW can be used to tune the desired wavelength range without any loss in the sensitivity. Sensitivity up to 9 nm/$^{\circ}C$ within the temperature range of 25 to $100^{\circ}C$ can be achieved with the proposed sensor, almost 6 times higher compared even to state-of-the-art high-sensitivity grating-based fiber optic temperature sensors.

• Proceedings of the KWS Conference
• /
• 2003.11a
• /
• pp.221-223
• /
• 2003

Effects of electromagnetic force which is one of the most important factor of metal transfer that affects bead geometry and microstructure of weld metal in GMAW(gas metal arc welding). In this paper, different ways of external electromagnetic forces were applied on GMAW process and their effects on the welding were studied. On certain conditions, better bead geometry, better influence on the arc and metal transfer mode and higher welding efficiency could be obtained. Experimental methods and their results will be presented.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1741-1746
• /
• 2003

Effects of electromagnetic force which is one of the most important factor of metal transfer that affects bead geometry and microstructure of weld metal in GMAW(gas metal arc welding). In this paper, different ways of external electromagnetic forces were applied on GMAW process and their effects on the welding were studied. On certain conditions, better bead geometry, better influence on the arc and metal transfer mode and higher welding efficiency could be obtained. Experimental methods and their results will be presented.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.620-624
• /
• 1998

Higher operating frequency provides rising output power from modern power electronics devices. Nevertheless, the switch-mode operation results in EMI which is produced due to large di/dt and/or dv/dt. The methods to reduce EMI are the use of classic and expensive input filters or the addition of the active filter into the main circuits. In this paper, by using the randomized PWM the EMI effect can be reduced and implementation of the proposed control scheme into the forward converter can improve the harmonic spectrum as well

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.121-126
• /
• 2002

In a recent construction industry, cable supported structures such as a cable-stayed bridge or space stadium have been increasingly constructed. Generally the stay cables as a critical member should be adjusted to be satisfied with the design tension forces. In this purpose, a vibration method has been applied to estimate the tension forces exerted to the existing stay cables. In this study, cable vibration tests were carried out to estimate the cable tension forces comparing with theoretical and practical formulas. From the measured frequencies obtained from free vibration and impulsive tests, the accuracy of 1he estimated tension forces is confirmed according to use only the first single mode or higher multiple modes.

• The Mathematical Education
• /
• v.41 no.1
• /
• pp.45-58
• /
• 2002

This study was conducted to investigate the gender-related effects of two instructional programs on spatial visualization skills of ninth grade students. Two instructional programs were developed for this study: a web-based virtual reality program and a paper-based program. 194 ninth graders from two middle schools in Seoul participated in this study. Six classes were divided into experimental groups and control groups. The Middle Grades Mathematics Projects (MGMP) Spatial Visualization Test was used to measure spatial visualization skills. The data analysis indicated that both the web-based and paper-based programs were effective to improve spatial visualization skills to treatment groups. Although boys'test mean scores were higher than girls' in the pretest, when deleting the effect of covariance of pretest, there were no statistical significance in the post-test. Girls in the treatment groups favored the paper-based spatial visualization program. These results imply that spatial training may benefit girls' performance more than that of boys and mode of instructional programs can create gender-related differences regarding spatial visualization skills.