• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권2호
• /
• pp.79-99
• /
• 2010

Pulsed current-voltage (I-V) methods are introduced to evaluate the impact of fast transient charge trapping on the performance of high-k dielectric transistors. Several pulsed I-V measurement configurations and measurement requirements are critically reviewed. Properly configured pulsed I-V measurements are shown to be capable of extracting such device characteristics as trap-free mobility, trap-induced threshold voltage shift (${\Delta}V_t$), as well as effective fast transient trap density. The results demonstrate that the pulsed I-V measurements are an essential technique for evaluating high-$\kappa$ gate dielectric devices.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.21-21
• /
• 2003

To increase the light-emission efficiency of LED, we increased the internal and external quantum efficiency by suppressing the defect formation in the quantum well and by increasing the light extraction efficiency in LED, respectively. First, the internal quantum efficiency was improved by investigating the effect of a low temperature (LT) grown p-GaN layer on the In$\sub$0.25/GaN/GaN MQW in green LED. The properties of p-GaN was optimized at a low growth temperature of 900oC. A green LED using the optimized LT p-type GaN clearly showed the elimination of blue-shift which is originated by the MQW damage due to the high temperature growth process. This result was attributed to the suppression of indium inter-diffusion in MQW layer as evidenced by XRD and HR-TEM analysis. Secondly, we improved the light-extraction efficiency of LED. In spite of high internal quantum efficiency of GaN-based LED, the external quantum efficiency is still low due to the total internal reflection of the light at the semiconductor-air interface. To improve the probability of escaping the photons outside from the LED structure, we fabricated nano-sized cavities on a p-GaN surface utilizing Pt self-assembled metal clusters as an etch mask. Electroluminescence measurement showed that the relative optical output power was increased up to 80% compared to that of LED without nano-sized cavities. I-V measurement also showed that the electrical performance was improved. The enhanced LED performance was attributed to the enhancement of light escaping probability and the decrease of resistance due to the increase in contact area.

• 자원환경지질
• /
• 제53권6호
• /
• pp.793-807
• /
• 2020

그린뉴딜정책의 실현은 석탄을 연료에서 원료로 활용분야로의 전환을 촉진시킬 것이다. 석탄은 수소의 생산, 인조 흑연 및 활성탄의 제조 원료로 활용될 수 있다. 석탄은 Steam carbon(SC) 반응과 Water-Gas Shift(WGS) 반응 및 탄산화 반응을 통하여 수소를 생산할 수 있으며, CO2격리기술과 연동되어 사용되어야 한다. 인조흑연은 실리콘이나 철 등의 무기촉매의 존재하에서 탄화도가 높은 무연탄 등을 2400~2800℃의 흑연화 온도까지 열처리함으로서 제조될 수 있기 때문에 무연탄은 석유계 피치에 비해 원료 가격경쟁력 측면에서 잠재성이 있다. 한편, 최근 목질기원의 활성탄에 필적하는 넓은 비표면적 혹은 많은 양의 미세기공을 가진 석탄기원의 활성탄이 제조될 수 있음을 여러 연구를 통해 확인되었다. 따라서 석탄기원의 활성탄은 목질기원의 활성탄을 대체할 수 있을 것으로 기대된다.

• Applied Biological Chemistry
• /
• 제48권3호
• /
• pp.267-272
• /
• 2005

계피(계지, Cinnanmomum cassia)의 주요성분인, trans-cinnamaldehyde를 $^1H-NMR$ 분광법을 이용하여 정량분석하였다. 핵자기 공명법을 이용한 정량분석의 응용가능성을 확인하기 위하여, t-cinnamaldehyde의 $^1H-NMR$ 스펙트럼에서 시료의 농도와 측정온도를 변화시킴에 따라 chemical shift의 변화와 적분값의 변화를 관찰하였다. t-Cinnamaldehyde(7.1429 mg/ml)를 19, 25, 30, 40 및 $50^{\circ}C$ 하에서 $^1H-NMR$ 측정한 결과, aldehyde methine signal(doublet)의 chemical shift가 9.7202, 9.7184, 9.7169, 9.7142 및 9.7124 ppm에서 관측되었다. 이는 측정온도는 signal의 chemical shift의 변화에 중요한 변수가 되지 않는다는 것을 의미하였다. 또한, aldehyde signal의 적분값이 $1.37(19^{\circ}C),\;1.37(25^{\circ}C),\;1.37(30^{\circ}C),\;1.37(40^{\circ}C)$ 및 $1.37(50^{\circ}C)$로써, 측정온도가 signal의 적분값에는 전혀 영향을 미치지 않는 것으로 나타났다. 동일한 온도 $25^{\circ}C$에서 0.4464, 0.8929, 1.7857, 3.5714, 7.1429 및 14.286 mg/ml의 농도의 시료에 대한 $^1H-NMR$ 측정 결과, aldehyde기의 chemical shifts는 각각 9.7206, 9.7201, 9.7196, 9.7192, 9.7185 및 9.7174 ppm에서 나타났다. 이는 각 시료의 농도가 증가함에 따라서 aldehyde의 signal이 고자장으로 약간 이동하는 것으로 나타났다. Aldehyde기의 doublet methine signal의 적분값과 각 시료의 농도에 따른 calibration curve는 직선으로 나타났으며, 매우 높은 회귀율($r^2=1.0000$)을 보였다. t-Cinnamaldehyde와 aldehyde기를 갖는 물질로써, C. cassia의 또 다른 구성성분인 t-2-methoxycinnamaldehyde($7.1429\;mg/ml\;CDCl_3,\;25^{\circ}C$)에 대해서, $^1H-NMR$ 스펙트럼을 측정한 결과, t-cinnamaldehyde는 ${\delta}_H$ 9.7174(9.7078, 9.7270)서 관측되었다. t-2-Methoxycinnamaldehyde는 ${\delta}_H$ 9.6936(9.6839, 9.7032)에서 관측되었다. 따라서, 두 화합물의 chemical shift의 차이는 resolution 값이 0.45 Hz인 NMR 스펙트럼 상에서 충분히 구분할 수 있을 정도로 나타났다. 위의 방법을 이용하여, 추출용매에 따른 C. cassia 내의 t-cinnamaldehyde의 함량을 분석한 결과, n-hexane, $CHCl_3$ 및 EtOAc로 추출하였을 때에, 각각 94.2 mg/g(0.94%), 137.6 mg/g(1.38%), 140.1 mg/g(1.40%)으로 결정되었다.

• 대한화학회지
• /
• 제35권4호
• /
• pp.335-342
• /
• 1991

헥사메틸벤젠과 1,3,5-트리니트로벤젠, 테트라클로로 파라벤조퀴논 및 테트라시아노 에틸렌간에 형성되는 전하이동착물의 안정도에 미치는 압력과 온도의 영향을 사염화탄소 용액내에서 분광광도법으로 연구하였다. 압력 및 온도증가에 따른 각계 착물들의 평형상수를 구하고 이 값으로부터 착물형성에 대한 열역학적 파라미터를 산출한 결과 헥사메틸벤젠과 각계의 전하이동착물의 상대적 안정도가 1,3,5-트리니트로벤젠 < 테트라클로로 파라벤조퀴논 < 테트라시아노 에틸렌 순으로 나타났다. 이러한 사실은 헥사메틸벤젠에 대한 그들의 상대적 산성도를 의미하며, 이 현상은 전자받게들의 음유도 효과와 입체장애 효과로 설명할 수 있다. 또 각 착물들의 압력 증가에 의한 적색이동, 온도 증가에 의한 청색이동 현상 및 압력 변화에 의한 진동자세기의 관계를 열역학 함수와 관계지워 설명하였다.

• 설비공학논문집
• /
• 제15권12호
• /
• pp.1078-1087
• /
• 2003

Kimchi refrigerator is a household electric appliance developed with the wholly domestic technology for maturing and keeping kimchi. However, the principle of keeping is not yet revealed obviously. This numerical study has been conducted to investigate the flow and heat transfer characteristics in a kimchi refrigerator. The effects of arrangement variation of a evaporation tube are examined. Also, the heat transfer characteristics through the insulation material are discussed in detail. The flow and temperature field was simulated using the commercial code of CFX-5.3. A natural convection flow is formed through about 5/6 region from the bottom within the keeping space and accordingly, the 90% region of kimchi containers satisfies the temperature requirement with 0$\pm$0.5$^{\circ}C$. The stagnant flow exists in the upper 1/6 region of the keeping space and accordingly, the stratified high temperature distributions appear in the upper region of kimchi containers. The upward shift of the start location of a evaporation tube improves the temperature concentration toward $0^{\circ}C$ but the pitch variation is of no effect. The heat fluxes on the insulation surfaces show two-dimensional distributions with being higher toward the center. Through the variation of insulation thickness, 3.5% saving of insulation material is obtained under the same heat transfer rate.

• 전기학회논문지
• /
• 제56권8호
• /
• pp.1430-1435
• /
• 2007

We developed a 440MHz surface acoustic wave (SAW) microsensor integrated with pressure-temperature sensors and ID tag. Two piezoelectric substrates were bonded, in which ${\sim}150\;{\mu}m$ cavity was structured. Four sides were completely sealed by JSR photoresist (PR). Pressure sensor was placed on the top substrate, whereas ill tag and temperature sensor were placed on the bottom substrate. Using network analyzer, the developed microsensor was wirelessly tested. Sharp reflection peaks with high S/N ratio, small signal attenuation, and small spurious peaks were observed. All the reflection peaks were well matched with the coupling of mode (COM) simulation results. With a 10mW RF power from the network analyzer, a ${\sim}1$ meter readout distance was observed. Eight sharp ON reflection peaks were observed for ID tag. Temperature sensor was characterized from $20^{\circ}C$ to $200^{\circ}C$. A large phase shift per unit temperature change was observed. The evaluated sensitivity was ${\sim}10^{\circ}/^{\circ}C$.

• 한국정보통신학회논문지
• /
• 제20권10호
• /
• pp.1980-1986
• /
• 2016

본 논문에서는 KrF 레이저를 이용한 격자 공정 후 고온 어닐링 온도조건에 따른 감마방사선 영향을 분석하였다. 제작된 광섬유 브래그 격자는 게르마늄(Ge)이 첨가된 동일한 광섬유에 어닐링 온도를 달리하여 제작하였으며, $Co^{60}$ 감마선원을 이용하여 약 115 Gy/min의 선량률로 총선량 약 31 kGy 감마선을 조사하였다. 격자의 안정화를 위한 고온 어닐링 공정은 광섬유 브래그 격자의 방사선 민감도 변화에 영향을 주는 것으로 나타났다. 실험결과를 통하여, 각각 다른 온도(100, 150, $200^{\circ}C$)로 안정화시킨 광섬유 브래그 격자들은 고온에 노출될수록 방사선 민감도가 증가했으며, 어닐링 온도조건에 따라서 방사선에 의한 브래그 파장 변화는 2배 이상의 차이를 보였다.

• Journal of Preventive Medicine and Public Health
• /
• 제35권4호
• /
• pp.282-286
• /
• 2002

Objectives : The level of 4-hydroxyproline (4-Hyp) in human urine was measured using high performance liquid chromatography (HPLC) with a fluorescence detector. This method is useful for medical examinations and investigating the radicals induced by physical, chemical, mental stresses. This method is superior to many published several methods in terms of its low cost and ability to analyze many samples. Methods : The urine from workers in a tire manufacturing company (22 male pre- and post-shift workers) and 18 office-workers as controls were analyzed. Data concerning age, the cumulative drinking amount and the cumulative smoking amount was collected with a questionnaire. The optimum applied amount of dansyl-Cl, the optimum reaction temperature and time, the recoveries and the optimum pH of the eluent and buffer were determined.4-Hyp from human urine was derivatized with dansyl-Cl (dimethylamino-naphthalene-1-sulfonyl chloride) after removing the a-amino acid by a treatment with phthalic dicarboxaldehyde (OPA) and cleaned with Bond Elut C18 column. The 4-Hyp derivatives were separated on a reversed phase column by gradient elution with a phosphate buffer (5 mmol, pH 8.0) and acetonitrile, and detected by fluorescence measurements at 340 nm (excitation) and 538 nm (emission). Results : The detection limit for the urinary free 4-Hyp was $0.364{\mu}mol/l$. The recovery rate of 4-Hyp was 99.7%, and the effective pH of the phosphate buffer and borate buffer were 3.0 and 8.0, respectively. From statistical analysis, age, drinking and smoking did not affect the urinary free 4-Hyp in both the controls and workers. The range of urinary 4-Hyp in the controls, pre-shift, and post-shift workers were 0.33-16.44, N.D-49.06, and $0.32-56.27{\mu}mol/l$. From the pared-sample t-test, the urinary 4-Hyp levels in post-shift workers ($11.82{\pm}6.73\;nmmol/mg\;Cre$) were 2-fold higher than in pre-shift workers ($5.36{\pm}5.53\;nmol;/mg\;Cre$) and controls ($4.91{\pm}4.89\;nmol;/mg\;Cre$). Conclusions : This method was developed with high sensitivity, accuracy, and precision. The present method was effectively applied to analyze the urinary free 4-Hyp in both controls and workers.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.507-510
• /
• 2008

Characteristics of an autothermal reformer at various operating parameters have been studied in this paper. Numerical method has been used, and simulation model has been developed for the analysis. Full Combustion reaction, Steam Reforming(SR) reaction, Water-Gas Shift(WGS) reaction, and Direct Steam Reforming(DSR) reaction are assumed as dominant chemical reactions in the autothermal reformer. Simulation results are compared with experimental results for code validation. Operating parameters of the autothermal reformer are inlet temperature, Oxygen to Carbon Ratio(OCR), Steam to Carbon Ratio(SCR), and Gas Hourly Space Veolcity(GHSV). SR reaction rate decreases with low inlet temperature. If OCR is increased, $H_2$ yield is increased but optimal point is suggested. WGS reaction is activated with high SCR. When GHSV is increased, reforming efficiency is increased but pressure drop may decrease the system efficiency.