• 지역사회간호학회지
• /
• 제15권2호
• /
• pp.289-297
• /
• 2004

Purpose: This study was conducted to determine factors affecting workers' physiological somatic complain using the Job Stress Model proposed by the National Institute for Occupational Safety and Health (NIOSH). Method: Data were collected from the 1st to the 30th of December 1999. The subjects were 2.123 workers employed at 155 work sites. Collected date were analyzed through SAS/PC program. Result: According to individual characteristics, younger and women groups showed significantly higher physiological somatic complaint than elder men groups. By work condition, groups with higher physiological somatic complaint included workers of irregular shift work. Dark lighting, improper temperature in winter, improper ventilation, inappropriate humidity, unpleasant work environment and crowded work place were significantly related with physiological somatic complaint. By work-related factor, physiological somatic complaint was high in those with higher variance in work load, quantitative work load, role conflict, job burden, role ambiguity and future ambiguity. On the other hand, physiological somatic complaint was low in those with little underutilization of ability. As for the relationships between physiological somatic complaint and non-work related factors, physiological somatic complaint was high in workers who had a side job, were bringing up infants alone, cleaned the house alone, cared for the elderly and disabled persons, were studying, were volunteering at another organization, and were spending 5-10 hours in religious activities per week. Physiological somatic complain was in significantly negative correlations with overall social support, supervisory support and family support, but in significantly positive correlations with co-worker support. Conclusion: The main predictors of physiological somatic complain were gender, shift work pattern, overtime work, ventilation, role ambiguity, role conflict, future ambiguity, job control, variance in work load, overall social support, worker with side job, worker who cleans the house alone, worker who is studying. These predictors explained 19.10% of the total variance of physiological somatic complain.

• 한국축산식품학회지
• /
• 제29권6호
• /
• pp.736-742
• /
• 2009

본 실험은 초고압 동결 및 해동기법이 돈육의 이화학적 특성에 미치는 효과를 규명하고자 시도하였다. 동결 및 해동처리 과정에서 가압에 따른 pH 증가 및 단백질 변성에 따른 보수력의 저하로 관찰되었지만, 초고압 동결 기법을 이용함으로써 효과적으로 해동 및 가열감량을 최소화할 수 있었다. 반면에 초고압 해동기법은 느린 해동속도에 기인한 얼음 재결정화로 해동육의 수율 측면에 영향을 미칠것으로 판단되었다. 따라서 초고압 동결처리에 의한 빠른 동결 및 빠른 해동처리를 통하여 돈육의 물리적 특성 저하를 최소화할 수 있을 것으로 간주되었다. 반면에 250 MPa의 압력은 돈육의 색도에 부정적인 영향을 미치는 것으로 나타났다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.340-341
• /
• 2012

In this work, we investigated the effects of temperature stress on flatband voltage (VFB) shifts of HfO2-SiO2 double gate dielectrics devices. Fig. 1 shows a high frequency C-V of the device when a positive bias for 10 min and a subsequent negative bias for 10 min were applied at room temperature (300 K). Fig. 2 shows the corresponding plot when the same positive and negative biases were applied at a higher temperature (473.15 K). These measurements are based on the BTS (bias temperature stress) about mobile charge in the gate oxides. These results indicate that the positive bias stress makes no difference, whereas the negative bias stress produces a significant difference; that is, the VFB value increased from ${\Delta}0.51$ V (300 K, Fig. 1) to ${\Delta}14.45$ V (473.15 K, Fig. 2). To explain these differences, we propose a mechanism on the basis of oxygen vacancy in HfO2. It is well-known that the oxygen vacancy in the p-type MOS-Cap is located within 1 eV below the bottom of the HfO2 conduction band (Fig. 3). In addition, this oxygen vacancy can easily trap the electron. When heated at 473.15 K, the electron is excited to a higher energy level from the original level (Fig. 4). As a result, the electron has sufficient energy to readily cross over the oxide barrier. The probability of trap about oxygen vacancy becomes very higher at 473.15 K, and therefore the VFB shift value becomes considerably larger.

• 한국분말재료학회지
• /
• 제17권4호
• /
• pp.289-294
• /
• 2010

For the aim of low-temperature co-fired ceramic microwave components, sintering behavior and microwave properties (dielectric constant ${\varepsilon}_r$, quality factor Q, and temperature coefficient of resonant frequency ${\tau}_f$) are investigated in $Bi_{18}O(Ca_{0.725}Zn_{0.275})_8Nb_{12}O_{65}$ [BCZN] ceramics with addition of $V_2O_5$. The specimens are prepared by conventional ceramic processing technique. As the main result, it is demonstrated that the additives ($V_2O_5$) show the effect of lowering of sintering temperature and improvement of microwave properties at the optimum additive content. The addition of 0.25 wt% $V_2O_5$ lowers the sintering temperature to $890^{\circ}C$ utilizing liquidphase sintering and show the microwave dielectric properties (dielectric constant ${\varepsilon}_r$ = 75, quality factor $Q{\times}f$ = 572 GHz, temperature coefficient of resonance frequency ${\tau}_f\;=\;-10\;ppm/^{\circ}C$). The estimated microwave dielectric properties with $V_2O_5$ addition (increase of ${\varepsilon}_r$, decrease of $Q{\times}f$, shift of ${\tau}_f$ to negative values) can be explained by the observed microstrucure (sintered density, abnormal grain structure) and possibly high-permittivity $Bi_{18}Zn_8Nb_{12}O_{65}$ (BZN) phase determined by X-ray diffraction.

• 한국안전학회지
• /
• 제19권3호
• /
• pp.51-56
• /
• 2004

Conductive polymer blends and composites are widely used for different safety application such as electrostatic charge dissipation(ESD), electromagnetic interference(EMI) shielding, electrostatic prevention and safety chemical sensor. In order to prepare a impedance-type humidity sensor that is durable at high humidities and high temperature, electically conductive polymer blends based on diallyldimethylammonium chloride(DADMAC) and epoxy were prepared in this study. The polymer blends type conductive ionomer exhibits reaction each other DADMAC and epoxy in FT-IR and DSC analysis. The blends material was traced by new peak at 1600cm-1 and appeard improvement of thermal resistance by melting point shift. Alumina substrate was deposited a pair of gold electrodes by screen printing. The blend material were spin-coated with a thin film type on the surface of alumina substrate. The polymer bleld type sensor exhibits a linear impedance increasing better than DADMAC coated humidity sensor. Also it shows good sensitivity, low hysteresis and durability against high humidity.

• Corrosion Science and Technology
• /
• 제20권6호
• /
• pp.367-372
• /
• 2021

The effect of carbon addition on the general corrosion behavior of high-chromium cast iron (HCCI) was studied by a scanning electron microscope with energy dispersive spectroscopy (SEM-EDS) or electron back-scattered diffraction (EBSD), or electrochemical polarization techniques in 0.1 mol dm^-3 H₂SO₄ + 0.05 mol dm^-3 HCl at room temperature. The addition of 2.1-2.8 wt% carbon to HCCI increased the fraction of eutectic austenite and eutectic carbide phases, while that of HCCI decreased the fraction of the primary austenitic phase. Potentiostatic polarization of the HCCI at -0.35 V_SSCE or 0.0 V_SSCE resulted in preferential general corrosion of the primary austenitic or eutectic austenitic phases, respectively. The decrease in corrosion current density and the shift in noble corrosion potential direction with increasing carbon content in the HCCI indicated that the fraction and the chemical composition of austenitic (primary and eutectic) and carbide phases were strongly related to the general corrosion behavior of the HCCI.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.114-122
• /
• 2024

Irradiation-induced defects and the precipitates in the wrapper material of the Indian Fast Breeder Test Reactor (FBTR), SS 316 are analyzed using the synchrotron source-based Angle Dispersive X-Ray Diffraction (ADXRD) technique with X-rays of energy 17.185 keV (wavelength ~0.72146 Å). The differences and similarities in the high displacement damage samples as a function of dpa (displacement per atom) and dpa rate in the range of 2.9 × 10^-7- 9 × 10^-7 dpa/s are studied. Ferrite and M₂₃C₆ are commonly observed in the present set of high displacement damage 40-74 dpa SS 316 samples irradiated at temperatures in the range of 400-483 ℃. Also, the dislocation density has increased as a function of the irradiation dose. The X-ray diffraction peak profile parameters quantified such as peak shift and asymmetry show that the irradiation-induced defects are sensitive to the dpa rate-irradiation temperature combinations. The increase in yield strength as a function of displacement damage is also correlated to the dislocation density.

• 전기전자학회논문지
• /
• 제24권1호
• /
• pp.284-292
• /
• 2020

SiC 기반 소자는 silicon 소자 대비 1200V 이상의 고전압 환경에서 우수하게 동작하며 특히 매우 높은 온도에서 안정적인 특성을 보여준다. 따라서 최근 1700V급 UMOSFET이 전기 자동차, 항공기 등의 전력시스템의 사용을 목표로 활발하게 연구개발 되고 있다. 본 논문에서는 최근 연구되고 있는 세 종류의 1700급 UMOSFET-Conventional UMOSFET (C-UMOSFET), Source Trench UMOSFET (ST-UMOSFET), Local Floating Superjunction UMOSFET (LFS-UMOSFET)-에 대해 온도 변화(300K-600K)에 따른 전력소자에서 중요한 변수 (breakdown voltage(BV), on-resistance(R_on), threshold voltage(v_th), transconductance(g_m))의 신뢰성 특성을 비교 분석하였다. 세 소자 모두 온도 증가에 따른 BV 증가, R_on 증가, v_th 감소, g_m 감소를 확인하였다. 그러나 세 소자의 구조 차이에 따라 BV, R_on v_th, g_m 변화에 차이가 있어 그 정도 및 원인에 대해 비교 분석하였다. 모든 결과는 sentaurus TCAD을 통해 simulation 되었다.

• Asia-Pacific Journal of Atmospheric Sciences
• /
• 제54권4호
• /
• pp.545-561
• /
• 2018

Over the North East Asia, extreme anomalous precipitation were observed in 2013 and 2014. During 2013 summer the precipitation was found to be higher (two standard deviation) than the climatological mean of the region; whereas during 2014, which was a borderline El Ni?o year, precipitation was found to be lower (one standard deviation). To understand the differences of these two anomalous years the Global/Regional Integrated Model system (GRIMs) has been used. The study found that low landsurface temperature and high sea-surface temperature over ocean caused a smaller land-sea contrast of surface temperature between East Asia and North West Pacific Ocean in 2014, which could have caused an eastward shift of mean monsoon circulation in that year compared to the circulation in 2013. Due to a change in the lower level circulation and wind field over East Asia the evaporation and moisture transport patterns became very different in those two years. In 2013, this study found high latent heat flux over Eastern China, which implies an increased surface evaporation over that region, and the moisture transported to the north by the mean monsoon circulation; whereas, there was no correlated transport of moisture to the North East Asia during 2014. The precipitable water over North East Asia has a stronger correlation with the latent heat flux over southern land region than that from Ocean region in the eastern side in both the years. A new approach is proposed to estimate the sub-grid scale hydrometeors from GRIMs, overestimated in the existing model.

• 청정기술
• /
• 제20권3호
• /
• pp.218-225
• /
• 2014

석탄의 가스화는 촉매 도입 시 온순 조건에서 가능하나, 석탄 내 회분에 의한 비활성화에 의해 반복적인 촉매 활용이 힘들다. 이에 본 연구에서는 삼화 원탄에서 회분을 제거하여 삼화 무회분탄(ash-free coal, AFC)을 제조한 후 가스화 반응성을 원탄과 비교하여 알아보았다. 우선 원탄을 대상으로 고정층 반응기에서 수증기 공급량, 공간 속도(space velocity), 온도 및 촉매를 변수로서 가스화 조건을 결정하였다. 고체상 혼합법으로 다양한 촉매 도입 시, 유동성을 갖는 $K_2CO_3$가 가장 높은 활성을 보였다. 무회분탄은 원탄보다 낮은 반응성을 보였으며, 이는 용매(1-methylnaphthalene, 1-MN)를 이용한 고온 추출 및 건조 공정 중에 소모된 산소 기능기 함량과 증가된 탄화도(carbonization)에 기인한다. $K_2CO_3$ 가 혼합된 무회분탄의 반응성은 급격히 증가하여 낮은 온도 ($700^{\circ}C$)에서도 높은 전환율을 보였다. 이때 $H_2/CO$와 $CO_2/CO$ 비율도 증가하는데, 이는 촉매에 의해 수성가스전환(water-gas shift) 반응이 활성화됨에 기인한다. 본 연구에서는 무회분탄의 저온 촉매 가스화 반응을 통해 석탄 가스화 공정의 경제성이 개선될 수 있음을 확인하였다.