• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4C
• /
• pp.461-471
• /
• 2004

Recently, subscribers have strong desire to get QoS based personalized services in high-speed Internet access. Service providers have been rapidly replacing ADSL, cable broadband access networks with Metro-Ethernet based VDSL. But, it is difficult for Motto-Ethernet based broadband access networks to provide QoS based personalized services, because already deployed network elements cannot distinguish subscribers by specific traffic characteristics. In this paper, when the access network has tree topology, we show that it is possible to provide QoS for each downstream flow with only per flow traffic shaping at the edge node without QoS functions in access networks. In order to show that our suggested scheduling algorithm at the edge node can support the assured service in tree topology access networks, we evaluated its performance by simulation. The suggested scheduling algorithm can shape per-flow traffic based on the maximum bandwidth, and guarantees minimum bandwidth per flow by modifying the DRR scheduler. Simulation results show that congestion and loss in the access network elements are greatly reduced, TCP performance is highly enhanced and loss for assured CBR service flows is reduced by only shaping per-flow traffic at the edge node using our proposed scheduling algorithm.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.5
• /
• pp.205-211
• /
• 2009

The Weightless Neural Network(WNN) has the advantage of the processing speed, less computability than weighted neural network which readjusts the weight. Especially, The behavior information such as sequential gesture has many serial correlation. So, It is required the high computability and processing time to recognize. To solve these problem, Many algorithms used that added preprocessing and hardware interface device to reduce the computability and speed. In this paper, we proposed the Ram based Sequential Cumulative Neural Network(SCNN) model which is sign language recognition system without preprocessing and hardware interface. We experimented with using compound words in continuous korean sign language which was input binary image with edge detection from camera. The recognition system of sign language without preprocessing got 93% recognition rate.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.113-120
• /
• 2014

In this paper, we examine Asymmetric Multi-Processing Environment to provide LDW service. Asymmetric Multi-Processing Environment consists of high-speed MCU to support rapid image processing and low-speed MCU for controlling with other ECU at the control domain. Also we designed rapid image process application and LDW application Software Component(SW-C) according to the development process rule of AUTOSAR. To communicate between two MCUs, timer based polling based IPC was designed. Also to communicate with other ECUs(Electronic Control Units), we designed CAN messages to provide alarm information and receiving CAN message to catch the Turn signal. We confirm the possibility of the various ADAS development using an Asymmetric Multi-Processing Environment and AUTOSAR platform. We also expect providing ISO 26262 functional safety.

• The Journal of the Korea Contents Association
• /
• v.5 no.1
• /
• pp.89-99
• /
• 2005

HPI system provides 1-3 Mbps data transmission speed to terminals moving up to 60 km/sec. Since HPI supports rtPS, nrtPS, and BE services requiring different QoS, it needs an efficient scheduling method based on those different QoSs. This paper suggests an uplink scheduling method which gives priority to services in the order of rtPS, nrtPS and BE services but which reserves some bandwidth for the low priority services before it allocates the bandwidth to higher priority services. Simulation results show that it can improve the uplink performance by reserving mean transmission rate to each nrtPS terminal and by reserving bandwidth, which amounts to about 1.5 times the mean transmission rate of the whole BE terminals, to the whole BE terminals.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11B
• /
• pp.1285-1296
• /
• 2011

Packet classification is one of the basic and important functions of the Internet routers, and it became more important along with new emerging application programs requiring real-time transmission. Since packet classification should be accomplished in line-speed on each incoming input packet for multiple header fields, it becomes one of the challenges in designing Internet routers. Various packet classification algorithms have been proposed to provide the high-speed packet classification. Hierarchical approach achieves effective packet classification performance by significantly narrowing down the search space whenever a field lookup is completed. However, hierarchical approach involves back-tracking problem. In order to solve the problem, set-pruning trie and grid-of-trie algorithms are proposed. However, the algorithm either causes excessive node duplication or heavy pre-computation. In this paper, we propose a smart set-pruning trie which reduces the number of node duplication in the set-pruning trie by the simple merging of the lower-level tries. Simulation result shows that the proposed trie has the reduced number of copied nodes by 2-8% compared with the set-pruning trie.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.3
• /
• pp.121-127
• /
• 2020

The small tracking radar targets the target in a real-time, fast-moving, fast-moving target against aircraft with a large RCS that is maneuvering at low speed and a small RCS aircraft maneuvering at high speed (fighters, drones, helicopters, etc.) It is a pulsed radar that detects and tracks. Performing a performance test on a tracking radar in a real environment is expensive, and it is difficult to quantitatively measure performance in a real environment. Describes the composition of the laboratory environment's comprehensive performance test facility and the main requirements and implementation of each configuration.Anechoic chambers to simulate the room environment, simulation target generator to simulate the signal of the room target, target It is composed of a horn antenna driving device to simulate the movement of a vehicle and a Flight Motion Simulatior (FMS) to simulate the flight environment of a tracking radar, and each design and implementation has been described.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.6
• /
• pp.23-28
• /
• 2009

In this paper, we proposed and analyzed the performance of the adaptive switching equalization for SC-FDMA system. It is well known that SC-FDMA system have a fairly similar structure to OFDMA system. Furthermore, SC-FDMA system has great advantage of low PAPR compare to OFDM system. However, this system often suffers from wireless channel characteristics such as multipath fading and increased channel impulse response and so on. To reduce this channel influence, it strongly requires efficient adaptive equalization. Therefore, the proposed system operated upon two modes namely, ZF mode for slow speed and MMSE mode for high speed. From the simulation results, we can confirm that the proposed scheme has more efficient performance from the system complexity point of view. So we can expect that the proposed system will be applied design of 3GPP LTE uplink.

• Journal of Internet Computing and Services
• /
• v.11 no.4
• /
• pp.59-72
• /
• 2010

WIM(Weigh-In-Motion) is the system measuring the weight of the vehicle with a high-speed. In the existing WIM system, vehicle weight is measured based on the constant speed and the error ratio has 10%. However, because of measuring the driving pattern, that is abnormal driving pattern which is like the acceleration and down-shift of the drivers, it has the error ratio which is bigger than the real. In order to it reduces the error ratio of WIM system, the improved WIM system needs to find the abnormal driving pattern. In order to reducing the error ratio of these WIM systems, the improved WIM system can find abnormal driving patterns. In this paper, the improved WIM system which analyzes the abnormality driving pattern influencing on the error ratio of WIM system of an existing and minimizes the error span is designed. The improved WIM system has the multi step loop structure of adding the loop sensor to an existing system. In addition, the measure function defined as an intrinsic is improved and the weight measured by the abnormal driving pattern is amended. The analysis of experiment result improved WIM system can know the fact that the error span reduces by 8% less than in the existing the maximum average sampling error 22.98%.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.6
• /
• pp.1294-1310
• /
• 2010

User authentication using fingerprint information provides convenience as well as strong security. However, serious problems may occur if fingerprint information stored for user authentication is used illegally by a different person since it cannot be changed freely as a password due to a limited number of fingers. Recently, research in fuzzy fingerprint vault system has been carried out actively to safely protect fingerprint information in a fingerprint authentication system. In addition, research to solve the fingerprint alignment problem by applying a geometric hashing technique has also been carried out. In this paper, we propose the hardware architecture for a geometric hashing based fuzzy fingerprint vault system that consists of the software module and hardware module. The hardware module performs the matching for the transformed minutiae in the enrollment hash table and verification hash table. On the other hand, the software module is responsible for hardware feature extraction. We also propose the hardware architecture which parallel processing technique is applied for high speed processing. Based on the experimental results, we confirmed that execution time for the proposed hardware architecture was 0.24 second when number of real minutiae was 36 and number of chaff minutiae was 200, whereas that of the software solution was 1.13 second. For the same condition, execution time of the hardware architecture which parallel processing technique was applied was 0.01 second. Note that the proposed hardware architecture can achieve a speed-up of close to 100 times compared to a software based solution.

• Journal of Internet Computing and Services
• /
• v.4 no.1
• /
• pp.53-65
• /
• 2003

I/O processing speed of relatively sluggish storage devices incurs overall performance degradation in computer systems. As a solution to improve the situation, SAN(Storage Area Network) has been proposed. In order to utilize a SAN system more effectively, where storage devices are directly connected with a high speed network such as Fibre Channel, a proper management tool is needed. In this paper, we present a design and implementation of a performance monitoring and configuration management tool for the SANtopia system which supports global file sharing in the SAN environment The developed tool is to monitor the performance of the Linux hosts composing the SANtopia system and to manage the configuration of the hosts and storage devices. It also supports GUI(Graphic User Interface) environment using the JAVA programming language.