• 한국정보통신학회논문지
• /
• 제6권1호
• /
• pp.48-54
• /
• 2002

인터넷 사용자와 다양한 응용의 발전에 힘입어 인터넷이 활성화되고 네트워크를 이용한 어플리케이션이 점점 더 많은 대역폭을 요구함에 따라 네트워크의 고속화를 필연적으로 수반하게 됨으로써 Gigabit Ethernet이 등장하게 되었다. Gigabit Ethernet은 기존 Ethernet 환경에서 네트워크에 대용량을 제공하고 고성능을 발휘할 수 있는 점등 여러 가지 면에서 장점을 지니고 있어 인터넷 사용자당 요구 트래픽을 해소할 수 있는 대안으로 제시되고 있다. 따라서 본 논문에서는 이러한 Gigabit Ethernet 기술과 관련하여 개념 및 특징을 살펴보고 경쟁 관계에 있는 FDDI 기술과 트래픽 분석을 통해 Gigabit Ethernet의 안정성과 효율성을 제고하였다.

• 대한임베디드공학회논문지
• /
• 제16권6호
• /
• pp.247-251
• /
• 2021

We propose a protocol for Ethernet-based industrial real-time communication networks. In the protocol, the master periodically transmits control frames to all slaves, and the ring-type network topology is selected to achieve high-speed transmission speed. The proposed protocol is implemented in the form of both firmware and Linux kernel modules. To improve the transmission speed, the MAC address table is disabled in the firmware implementation, and the NAPI function of the Ethernet driver is removed in the Linux kernel module implementation. A network experiment environment is built with four ARM processor-based embedded systems and network operation experiments are performed for various frame sizes. From the experimental results, it is verified that the proposed protocol normally operates, and the firmware implementation shows better transmission speed than the Linux kernel module implementation.

• 대한임베디드공학회논문지
• /
• 제17권3호
• /
• pp.185-190
• /
• 2022

We propose a high speed data communication method for motor drive systems with fast control cycle in order to collect state variables of motor control without degrading control performance. Ethernet is chosen for communication device, and multi-core DSP architecture is exploited for communication processing load distribution. The communication program including network protocol stack and motor control program are assigned to two separate cores, and data between two cores are exchanged using interrupt-based inter-process communication mechanism, which enables to achieve a high-speed communication performance without degrading the motor control performance. The performance of developed communication method is demonstrated by real experiments using TCP, UDP and Raw Socket protocols in an experimental setup consisting of TI's TMS320F28388D motor control card and MS Windows PC.

• ETRI Journal
• /
• 제34권6호
• /
• pp.807-815
• /
• 2012

In this paper, we propose a scheme for partially dynamic lane control for energy saving in multilane-based high-speed Ethernet. In this scheme, among the given transmission lanes, at least one lane is always operating, and the remaining lanes are dynamically activated to alleviate the network performance in terms of queuing delay and packet loss in the range of acceptance. The number of active lanes is determined by the decision algorithm based on the information regarding traffic and queue status. The reconciliation sublayer adjusts the transmission lane with the updated number of lanes received from the algorithm, which guarantees no processing delay in the media access control layer, no overhead, and minimal delay of the exchanging control frames. The proposed scheme is simulated in terms of queuing delay, packet loss rate, lane changes, and energy saving using an OPNET simulator. Our results indicate that energy savings of around 55% (or, when the offered load is less than 0.25, a significant additional savings of up to 75%) can be obtained with a queuing delay of less than 1 ms, a packet loss of less than $10^{-4}$, and a control packet exchange time of less than $0.5{\mu}s$ in random traffic.

• 한국통신학회논문지
• /
• 제30권6A호
• /
• pp.510-516
• /
• 2005

본 논문은 고속 광 이더넷에서 최소 대역폭 특성을 지닌 선로 부호에 의한 전송 성능의 개선 가능성을 제시하고자 선로 부호의 파라미터들을 조사 분석하고, 동일한 광 이더넷에서 최소 대역폭 특성이 있는 선로 부호(MB810)와 기존의 선로 부호(8B/10B)로 각각 부호화된 데이터를 전송하는 시뮬레이션을 수행하였다. 시뮬레이션 환경은 10기가비트 이더넷의 표준에 있는 Serial type LAN PHY 10GBASE-E 물리 계층을 사용한 단일 채널 전송 광 이더넷과 WDM type LAN PHY 10GBASE-LX4 물리계층을 사용한 다중 채널 전송 광 이더넷으로 구현되었다. 또 MB810 선로부호의 최소 대역폭 특성을 확인하고 두 선로부호에 의한 전송 성능을 비교하기 위하여 수신 광 파워에 따른 비트 오율(BER)을 비교하였다.

• 한국지능시스템학회논문지
• /
• 제19권6호
• /
• pp.860-864
• /
• 2009

본 논문에서는 고속의 이더넷 네트워크 기술을 이용한 하드웨어 통합 기술과 RT 미들웨어를 이용한 소프트웨어 통합 기술을 적용한 친환경 스마트 가전 기기들을 효과적으로 통합하고 운용하는 기술 방법에 대하여 제시한다. 또한 고속 이더넷을 이용한 분산 하드웨어 장치들의 통합 및 RT 미들웨어 기술을 이용한 소프트웨어 통합 기술을 기술하고, 고속 이더넷 기술과 RT 미들웨어 기술을 적용한 친환경 스마트 홈 가전기기의 통합 관리 시스템을 구현한다.

• 한국정보통신학회논문지
• /
• 제9권5호
• /
• pp.1111-1116
• /
• 2005

초고속 인터넷의 보급, 디지털 정보장비의 확산 및 생활 패턴의 변화에 따라 홈 네트워크의 필요성이 점차 확대되고 있다. 이에 따라 본 연구에서는 홈 네트워크화를 위해서 8051 MCU, Hardware TCP/IP를 이용하여 임베디드 이더넷 모듈을 설계, 개발하였다. 타겟 머신에 간단한 웹 서버를 구축하고 이를 이용한 원격제어 프로그램을 포팅하여 원격지에서도 인터넷으로 가전기기를 제어할 수 있도록 하였다. 본 연구에서 개발한 모듈을 이용하므로 저가격으로 홈 오토메이션을 구현할 수 있으리라 생각한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.472-475
• /
• 2002

This paper presents a high speed ethernet communication and depulication method of communication to prevent decrease of reliability that was generated by high speed communication. Thus communication reliability was improved and this paper was considered that if any physical breakdown of line of communication occurred, other line of communication could operate collect. This paper used Flash memory for setting storage of backup data at Electric Car that have an humidity and a temperature and an impact. also improved reliability and besides matching data format to windows data format realized to confirm application program at PC or note book computer.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.101-104
• /
• 2000

Nowadays, the issue of congestion control in high-speed communication networks becomes critical in view of the bandwidth-delay products for efficient data flow. In particular, the fact that the congestion is often accompanied by the data flow from the high-speed link to low-speed link is important with respect to the stability of closed-loop congestion control. The Virtual-Connection Network (VCN) in Gigabit Ethernet networks is a packet-switching based network capable of implementing cell- based connection, link-by-link flow-controlled connection, and single- or multi-destination virtual connections. VCN described herein differ from the virtual channel in ATM literature in that VCN have link-by-link flow control and can be of multi-destination. VCNs support both connection-oriented and connectionless data link layer traffic. Therefore, the worst collision scenario in Ethernet CSMA/CD with virtual collision brings about end-to-end delay. Gigabit Ethernet networks based on CSMA/CD results in non-deterministic behavior because its media access rules are based on random probability. Hence, it is difficult to obtain any sound mathematical formulation for congestion control without employing random processes or fluid-flow models. In this paper, an analytical method for the design of a congestion control scheme is proposed based on Smith＇s principle to overcome instability accompanied with the increase of end-to-end delays as well as to avoid cell losses. To this end, mathematical analysis is provided such that the proposed control scheme guarantees the performance improvement with respect to bandwidth and latency for selected network links with different propagation delays. In addition, guaranteed bandwidth is to be implemented by allowing individual stations to burst several frames at a time without intervening round-trip idle time.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.359-362
• /
• 2002

In this paper, we propose a structure of 800bps high speed router and a gigabit Ethernet line interface board. Having Programmability, network processor is applied to gjgabit Ethernet line interface board. Also, we propose a new method to upgrade image files that consist of operating system and drivers. It is possible to upgrade image files for several boards at once and to reduce the elapsed time for image upgrade using tile proposed method.