• Journal of Animal Science and Technology
• /
• v.44 no.2
• /
• pp.233-238
• /
• 2002

Meat quality of the domestic pork loins(n=537) classified by 3 groups(5.31-5.50, 5.51-5.70 and $\geq$5.71) according to pH at 24hr post-mortem(pH24) was investigated. In proximate chemical compositions, protein was highest and fat was lowest in the pork loins of pH24 5.31-5.50 group. Water holding capacity increased as pH24 increased, whereas purge loss and cooking loss decreased as pH24 increased. Meat color values(CIE L*, a*, b*, Chroma, Hue and $\Delta$E) decreased as $pH_{24}$ increased. In texture traits, hardness and chewiness were lowest and fat hardness was highest in the pork loins of $pH_{24}{\geq}$5.71 group when compared to the other $pH_{24}$ groups. However, Warner-Bratzler Shear force, springiness and cohesiveness were not significantly different among the pH24 groups(P>0.05). In sensory properties, juiciness and tenderness were highest in $pH_{24}{\geq}$5.71 group. From the results of this study, pork quality was highly related to $pH_{24}$. Therefore, the factors affecting the post-mortem pH, such as stress before slaughter, slaughtering methods, and cooling condition slaughter must be properly controlled and improved to produce high quality pork.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.11
• /
• pp.891-899
• /
• 2013

This paper suggests a test and evaluation procedure of conformal load-bearing antenna structure(CLAS) for high speed military jet application. A log periodic patch type antenna was designed for multi-band communication and navigation antenna. Carbon/Glass fiber reinforced polymer was used as a structure supporting aerodynamic loads and honeycomb layer was used to improve antenna performance. Multi-layers were stacked and cured in a hot temperature oven. Gain, VSWR and polarization pattern of CLAS were measured using anechoic chamber within 0.15~2.0 GHz frequency range. Tension, shear, fatigue and impact load test were performed to evaluate structural strength of CLAS. Antenna performance test after every structural strength test was conducted to check the effect of structural test to antenna performance. After the application of new test and evaluation procedure to validate a new CLAS, a design improvement was found.

• International Journal of Highway Engineering
• /
• v.2 no.3
• /
• pp.129-144
• /
• 2000

This paper presents the characteristics of viscoelastic properties and fatigue performance of SBS modified asphalt mixtures depending on the aggregate gradation. Dynamic shear rheometer (DSR) and uniaxial tensile creep tests are performed to analyze the thermomechanical behavior of asphalt binders and mixtures, respectively. Uniaxial tensile fatigue tests for seven different asphalt mixtures are conducted to evaluate the effects of aggregate gradations and SBS modifier on the fatigue performance of the mixtures. DSR and uniaxial tensile creep tests results show that the SBS modified asphalt mixtures have better rutting resistance than the unmodified mixtures at high temperatures regardless of the aggregate gradations used. Fatigue factor $G^*sin\delta$ in Superpave binder specification may not be adequate for evaluating the fatigue Performance of asphalt mixtures. It is observed from uniaxial tensile fatigue tests that SBS modified asphalt mixtures compared to unmodified mixtures have ten times longer fatigue lives regardless of the aggregate gradations(dense, SMA, and Superpave gradations) used in the mixtures. The better fatigue performance of the SBS modified mixtures is observed even after long-term aging process. The effect of aggregate gradations on the fatigue performance is not as significant as the SBS modifier. The cellulose fiber added in the SMA mixture has negligible effects on the viscoelastic Properties and fatigue performance of the mixture, but is effective in reducing draindown. Although the SBS modified asphalt binder is used, it may be necessary to add the cellulose fiber into the SMA mixture to prevent the draindown.

• Korean Journal of Poultry Science
• /
• v.6 no.1
• /
• pp.24-30
• /
• 1979

1. The effects of heat stress (38$^{\circ}C$), cold stress (4$^{\circ}C$) and extreme cold stress (-20$^{\circ}C$) before slaughter on the tenderness and postmortem glycolysis if the excised chicken breast muscle were studied Heat stress significantly (p 0.05) increased the toughness of breast muscle. Though statistically not significant, cold stress also adversely affected the tenderness. The heat-stressed birds showed higher zero hr glycogen higher zero hr pH and significantly (p 0.05) love. ultimate pH then the controls. The cold-stressed birds showed intermediate values in these parameters. Highly significant correlations. were observed between shear value and each of these three parameters. Glycolysis rate ana final moisture content were minor factors which affected the muscle tenderness to a limited extent. The slightly elevated lactate-dehydrogenase and creatine phosphokinase activities in serum and breast muscle of stressed birds failed to account for any variations in tenderness. 2. Chicken breast and thigh muscles were subjected to different environmental temperatures to determine if the phenomenon of cold shortening exists in chicken muscle. For both breast and thigh muscles, minimum shortening was observed in the 4-10$^{\circ}C$t range. Muscles held at 0$^{\circ}C$ showed a slightly higher extent of shortening than at 4$^{\circ}C$; where as muscles held at above 20$^{\circ}C$ showed a severe shortening effect. It was concluded that no apparent cold shortening was detected in chicken muscle except at 0$^{\circ}C$ and even at 0$^{\circ}C$ and even at 0$^{\circ}C$ the extent of shortening was of a small magnitude compared to bovine muscles. Since high temperature induces a much greater shortening, muscle temperature must be lowered to below 20$^{\circ}C$ as early as possible to prevent excessive muse]e shortening.

• Journal of the Korean earth science society
• /
• v.28 no.7
• /
• pp.857-870
• /
• 2007

The structure and evolution of a thunderstorm outflow in two dimensions with no environmental wind are investigated using a cloud-resolving model with explicit liquid-ice phase microphysical processes (ARPS: Advanced Regional Prediction System). The turbulence structure of the outflow is explicitly resolved with a high-resolution grid size of 50m. The simulated single-cell storm and its associated Kelvin-Helmholtz (KH) billows are found to have the lift stages of development maturity, and decay. The secondary pulsation and splitting of convective cells resulted from interactions between cloud dynamics and microphysics are observed. The cooled downdrafts caused by the evaporation of rain and hail in the relatively dry lower atmosphere result in thunderstorm cold-air outflow. The outflow head propagates with almost constant speed. The KH billows formed by the KH instability cause turbulence mixing from the top of the outflow and control the structure of the outflow. Ihe KH billows are initiated at the outflow head, and pow and decay as moving rearward relative to the gust front. The numerical simulation results of the ratio of the horizontal wavelength of the fastest growing perturbation to the critical shear-layer depth and the ratio of the horizontal wavelength of the billow to its maximum amplitude are matched well with the results of other studies.

• Journal of Animal Science and Technology
• /
• v.48 no.6
• /
• pp.813-818
• /
• 2006

The objective of this study was to investigate effects of supplementation levels of L-leucine in low-lysine diets on growth performance and meat quality parameters in finishing Duroc pigs. A total of fifty-four pigs with an average initial weight of 74±1kg were allotted to one of three dietary treatments. Each treatment had six replications of three pigs per replicate. The treatment diets included 1)a corn-soybean meal basal diet containing lysine as low as 0.45% (CON), 2) basal diet plus 1.5% L-leucine (LEU 1.5), and 3) basal diet plus 3.0% L-leucine (LEU 3.0). No difference was found in ADG, ADFI and Feed/Gain among treatments. In carcass parameters, dressing precent and back-fat thickness were not affected by L-leucine levels, however, longissimus dorsi area tended to increase by supplementation of L-leucine. Marbling score was significantly higher (P<0.05) in LEU 1.5 and LEU 3.0 than in CON. In meat quality parameters, CIE L* of meat color significantly increased (P<0.05) and crude fat tended to increase by supplementation of L-leucine. However, there was no difference in water holding capacity, cooking loss and shear force value. This study suggests that dietary supplementation of L-leucine in low-lysine diets at the end of finishing period can produce high marbled pork which is preferred by Korean consumers.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.2 no.1
• /
• pp.62-70
• /
• 2003

Purpose: We examined the kinematics and kinetics of the shoulder in youth baseball pitchers in light of the mechanisms of development of little league shoulder and humeral retrotorsion. Materials and Methods: The joint kinematics and the net force and torque acting on the humerus were calculated in fourteen youth pitchers throwing in a simulated game. Results: The major force component acting on the humerus was a tensile force of 378$\pm$81 N that peaked just after ball release. The predominant torque on the humerus was an external rotation torque about the long axis of the humerus. This torque reached a peak value of 35.3$\pm$6.7 Nm about 73$\%$through the pitching motion. This torque is approximately 66$\%$ of the torque required to fracture of the adult humerus. Conclusions: The direction of the humeral torque was consistent with the development of increased humeral retrotorsion in the throwing arm. Shear stress arising from the high torque during the late cocking phase likely leads to deformation the relatively weak proximal humeral epiphysis. The external rotation torque applied to the humerus during the pitch also agrees with the proposed mechanism for development little league shoulder, which has been hypothesized to be due to rotational stresses acting on the epiphysis during the throwing motion.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.38 no.2
• /
• pp.139-145
• /
• 2012

There is a unique type of fatty acid in the hair surface. 18-methyleicosanoic acid (18-MEA) is an unusual anteiso fatty acid covalently linked to the outermost surface of hair cuticle. A layer of 18-MEA is located in the upper ${\beta}$-layer of the CMC that is responsible for the low surface energy and low friction resistance of the hair's outer surface. The high mobility of 18-MEA molecule facilitates spreading of extraneous lipid by decreasing interfacial shear strength. In this study, we introduced N-hydroxyl succinimidyl ester functional group to the one end of C10 - 40 isoalkyl acid for regenerating hair surface with covalently bound fatty acid layer. The re-hydrophobicization of hair surface has been investigated by contact angle measurement. The inner moisture content of hair at different levels of humidity (40, 55, 70 %RH) was measured by electric moisture analyzer. Treatment with Hydroxysuccinimidyl C10 - 40 Isoalkyl Acidate (HCIA) was supposed to make hair surface smoother by filling the cracks between cuticles with covalently bound fatty acid monomolecular layer like cuticle glue. This glue effect was also confirmed with line profile of AFM images. Therefore, the moisture and structural components of inner hair were not easily flown out and the optimum moisture content could be kept constantly though the outside humidity level was changed. The lateral force microscopy (LFM) by using atomic force microscope showed that the friction force of hair surface treated with HCIA was decreased. It also showed the constantly sustained friction value even after shampooing repeated 15 times.

• Tunnel and Underground Space
• /
• v.24 no.2
• /
• pp.155-165
• /
• 2014

Multiple thermal energy storage (TES) caverns can be used for storing thermal energy on a large scale and for a high-aspect-ratio heat storage design to provide good thermal performance. It may also be necessary to consider the use of multiple caverns with a reduced length when a single, long tunnel-shaped cavern is not suitable for connection to aboveground heat production and injection equipments. When using multiple TES caverns, the separation distance between the caverns is one of the significant factors that should be considered in the design of storage space, and the optimal separation distance should be determined based on a quantitative stability criterion. In this paper, we described a numerical approach for determining the optimal separation distance between multiple caverns for large-scale TES utilization. For reliable stability evaluation of multiple caverns, we employed a probabilistic method which can quantitatively take into account the uncertainty of input parameters by probability distributions, unlike conventional deterministic approaches. The present approach was applied to the design of a conceptual TES model to store hot water for district heating. The probabilistic stability results of this application demonstrated that the approach in our work can be effectively used as a decision-making tool to determine the optimal separation distance between multiple caverns. In addition, the probabilistic results were compared to those obtained through a deterministic analysis, and the comparison results suggested that care should taken in selecting the acceptable level of stability when using deterministic approaches.

• International Journal of Highway Engineering
• /
• v.3 no.3 s.9
• /
• pp.119-133
• /
• 2001

The stiffness of chemcrete modified asphalt mixtures increase rapidly with time in the presence f oxygen and high temperature, Sometimes the asphalt pavements that have chemcrete modified asphalt mixture applied on the surface none show premature cracking because of the excessive increase in the stiffness f the asphalt mixtures. To mitigate this premature cracking, the chemcrete modified mixtures have been used as a base course material. In this study, the performance of the chemcrete modified asphalt binder and mixtures are investigated through a course of various laboratory tests including dynamic shear rheometer and bending beam rheometer tests for binders and uniaxial tensile fatigue, wheel tracking, and moisture damage tests for the mixtures. And also the resilient modulus of the conventional and chemcrete modified mixtures are compared based on the test results conducted on the specimens obtained from various in-situ test sections. It can be concluded from the tests results that the chemcrete modified mixtures show better rutting resistance than conventional mixtures. The chemcrete modified mixtures may have low temperature cracking when it is applied in the cold region. The stiffness of chemcrete modified mixtures is approximately 50 percent higher than that of conventional mixtures more than two years after the chemcrete modified mixture was applied in the base course.