• Weed & Turfgrass Science
• /
• v.6 no.3
• /
• pp.222-234
• /
• 2017

Green tides, which was mainly caused by Ulva spp., have been increasing in severity and frequency globally, and have negatively affected on marine ecosystems. This study was conducted to investigate effects of various physical and chemical factors on the death of Ulva australis (ULAUS) and to consider a practical measures useful for alleviating Ulva bloom. Soaking of ULAUS thalli in pure water for 8 hr didn't induce a death, but incubation in 1.0-1.5% salinity for 7 d inhibited sporulation by about 70%. Desiccation gave rise to a serious damage when more than 40-50% of initial fresh weight was lost. ULAUS growth was sensitive to temperature and seriously inhibited from more than $30^{\circ}C$. At $35^{\circ}C$, $40^{\circ}C$, $45^{\circ}C$ and $50^{\circ}C$, treatment time required for 90-95% death of ULAUS thalli was 1 d, 10 min, 30 sec, and 1 sec, repectively. ULAUS growth was seriously inhibited at lower than pH 6.0 and completely dead at pH 4.0. Several compounds for ULAUS control was selected and the chemcals causing a rapid death were oxidants such as hydrogen peroxide and sodium percarbonate. Taken together, our results suggest that low salinities, dryness, pH, high temp. and compounds could be selected for Ulva bloom control, and high temperature and compounds seems to be useful for a development of practical control methods.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.2
• /
• pp.117-126
• /
• 1999

Hampyong Bay is a semienclosed and macrotidal bay which opens to the eastern Yellow Sea through a narrow inlet in the southwestern coast of Korea. In order to understand the tidal-flat sedimentation in the semienclosed setting, morphology, sediments, accumulation rate and sea cliff erosion were investigated in the tidal flat of Hampyong Bay. The tidal flat of Hampyong Bay lacks intertidal drainage systems, and generally shows the concave-upward profile whose relief is designated by marked morphological features such as high-tide beaches, intertidal sand shoals and tidal creeks. Surfacial sediments of the tidal flat mainly consist of mud, sandy mud, gravelly mud, gravelly sand and muddy gravel, thus showing the textural characteristics of multimodal grain-size distribution, poorly sorting and positive skewness. The sediments generally coarsen landward due to the increase in coarse fraction content. Sedimentary structures are deeply bioturbated, but parallel lamination and lenticular bedding are locally found in the mudflat near mean low water line. Annual accumulation rates across the tidal flat (along Line SM) average -5.2 cm/yr with a range of -45.8~+4.2 cm/yr, indicating that the tidal flat is erosional. In general, erosion rates of upper and lower tidal flat are higher than those of middle tidal flat. Seasonally, the erosion rates are much higher during spring and winter when dominant wind direction corresponds to the long axis of Hampyong Bay. Sea cliffs are eroded at a rate of 1.4 m/yr. The biggest sea cliff erosion generally occurs 1~2 months later after tidal flats were extensively eroded. Such erosions of tidal Oats and sea cliffs in the semienclosed bay setting are interpreted to be due to wind waves coupled with local sea-level rise.

• Economic and Environmental Geology
• /
• v.30 no.3
• /
• pp.249-262
• /
• 1997

The Sr and Nd isotopic compositions of two foliated granitic plutons located in the Chonju and Sunchang area were determined in order to reconfirm the intrusion ages of granitoids and to study the sources of granitic magmas. The best defined Rb-Sr isochron for the whole rock samples of the Chonju foliated granite (CFGR) give an age of $284{\pm}12Ma$, suggesting early Permian intrusion age. In contrast, the whole rock Rb-Sr data of the Sunchang foliated granite (SFGR) scatter widely on the isochron diagram with very little variation in the $^{87}Rb/^{86}Sr$ ratios and, therefore, yield no reliable age information. Futhermore they show the concordance of mineral and whole rock Rb-Sr isochron and divide into two linear groups with roughly the same slopes and significantly different $^{87}Sr/^{86}Sr$ ratios, indicating some kind of Rb-Sr distortion in whole rock scale and a difference in source material and/or magmatic evolution between two subsets. The reconstructed isochrons of 243 Ma, which was defined from the proposed data by the omission of one sample point with significantly higher $^{87}Rb/^{86}Sr$ ratio than the others, and 252 Ma, from the combined data of it and some of this study, strongly suggest the possibility that the SFGR was intruded appreciably earlier than had previously been proposed, although the reliability of these ages still questionable owing to high scatter of data points and, therefore, further study is necessary. All mineral isochrons for the investigated granites show the Jurassic to early Cretaceous thermal episode ranging from 160 Ma to 120 Ma Their corresponding initial $^{87}Sr/^{86}Sr$ ratios correlate well with their whole rock data, indicating that the mineral Rb-Sr system of the investigated granites was redistributed by the postmagmatic thermal event during Jurassic to early Cretaceous. The initial ${\varepsilon}Sr$ values for the CFGR (64.27 to 94.81) tend to be significantly lower than those for the SFGR (125.43 to 167.09). Thus it is likely that there is a marked difference in the magma source characteristics between the CFGR and the SFGR, although the possibility of an isotopic resetting event giving rise to a high apparent initial ${\varepsilon}Sr$ in the SFGR can not be ruled out. In contrast to ${\varepsilon}Sr$, both batholiths show a highly resticted and negative values of initial ${\varepsilon}Nd$, which is -14.73 to -19.53 with an average $-16.13{\pm}1.47$ in the CFGR and -14.78 to -18.59 with an average $-17.17{\pm}1.01$ in the SFGR. The highly negative initial ${\varepsilon}Nd$ values in the investigated granitoids strongly suggest that large amounts of recycled old continental components have taken part in their evolution. Furthermore, this highly resticted variation in ${\varepsilon}Nd$ is significant because it requires that the old crustal source material, from which the granitoid-producing melts were generated, should have a reasonably uniform Nd isotopic composition and also quit similar age. Calculated T2DM model ages give an average of $1.83{\pm}0.25Ga$ for CFGR and $1.96{\pm}0.19Ga$ for SFGR, suggesting the importance of a mid-Proterozoic episode for the genesis of two foliated granites. Although it is not possible to determine precisely the source rock compositions for the investigated foliatic granites, the Sr-Nd isotopic evidences indicate that midcrustal or less probably, a lower crustal granulitic source could be the most likely candidate.

• Fiber Technology and Industry
• /
• v.2 no.4
• /
• pp.490-508
• /
• 1998

One of the latest fields of research in the area of output devices is tactual display devices [13,31]. These tactual or haptic devices allow the user to receive haptic feedback output from a variety of sources. This allows the user to actually feel virtual objects and manipulate them by touch. This is an emerging technology and will be instrumental in enhancing the realism of wearable augmented environments for certain applications. Tactual displays have previously been used for scientific visualization in virtual environments by chemists and engineers to improve perception and understanding of force fields and of world models populated with the impenetrable. In addition to tactual displays, the use of wearable audio displays that allow sound to be spatialized are being developed. With wearable computers, designers will soon be able to pair spatialized sound to virtual representations of objects when appropriate to make the wearable computer experience even more realistic to the user. Furthermore, as the number and complexity of wearable computing applications continues to grow, there will be increasing needs for systems that are faster, lighter, and have higher resolution displays. Better networking technology will also need to be developed to allow all users of wearable computers to have high bandwidth connections for real time information gathering and collaboration. In addition to the technology advances that make users need to wear computers in everyday life, there is also the desire to have users want to wear their computers. In order to do this, wearable computing needs to be unobtrusive and socially acceptable. By making wearables smaller and lighter, or actually embedding them in clothing, users can conceal them easily and wear them comfortably. The military is currently working on the development of the Personal Information Carrier (PIC) or digital dog tag. The PIC is a small electronic storage device containing medical information about the wearer. While old military dog tags contained only 5 lines of information, the digital tags may contain volumes of multi-media information including medical history, X-rays, and cardiograms. Using hand held devices in the field, medics would be able to call this information up in real time for better treatment. A fully functional transmittable device is still years off, but this technology once developed in the military, could be adapted tp civilian users and provide ant information, medical or otherwise, in a portable, not obstructive, and fashionable way. Another future device that could increase safety and well being of its users is the nose on-a-chip developed by the Oak Ridge National Lab in Tennessee. This tiny digital silicon chip about the size of a dime, is capable of 'smelling' natural gas leaks in stoves, heaters, and other appliances. It can also detect dangerous levels of carbon monoxide. This device can also be configured to notify the fire department when a leak is detected. This nose chip should be commercially available within 2 years, and is inexpensive, requires low power, and is very sensitive. Along with gas detection capabilities, this device may someday also be configured to detect smoke and other harmful gases. By embedding this chip into workers uniforms, name tags, etc., this could be a lifesaving computational accessory. In addition to the future safety technology soon to be available as accessories are devices that are for entertainment and security. The LCI computer group is developing a Smartpen, that electronically verifies a user's signature. With the increase in credit card use and the rise in forgeries, is the need for commercial industries to constantly verify signatures. This Smartpen writes like a normal pen but uses sensors to detect the motion of the pen as the user signs their name to authenticate the signature. This computational accessory should be available in 1999, and would bring increased peace of mind to consumers and vendors alike. In the entertainment domain, Panasonic is creating the first portable hand-held DVD player. This device weight less than 3 pounds and has a screen about 6' across. The color LCD has the same 16:9 aspect ratio of a cinema screen and supports a high resolution of 280,000 pixels and stereo sound. The player can play standard DVD movies and has a hour battery life for mobile use. To summarize, in this paper we presented concepts related to the design and use of wearable computers with extensions to smart spaces. For some time, researchers in telerobotics have used computer graphics to enhance remote scenes. Recent advances in augmented reality displays make it possible to enhance the user's local environment with 'information'. As shown in this paper, there are many application areas for this technology such as medicine, manufacturing, training, and recreation. Wearable computers allow a much closer association of information with the user. By embedding sensors in the wearable to allow it to see what the user sees, hear what the user hears, sense the user's physical state, and analyze what the user is typing, an intelligent agent may be able to analyze what the user is doing and try to predict the resources he will need next or in the near future. Using this information, the agent may download files, reserve communications bandwidth, post reminders, or automatically send updates to colleagues to help facilitate the user's daily interactions. This intelligent wearable computer would be able to act as a personal assistant, who is always around, knows the user's personal preferences and tastes, and tries to streamline interactions with the rest of the world.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.3 no.1
• /
• pp.52-64
• /
• 1970

Fingerlings hatched from the eggs of the puffer, Fugu rubripes, which were spawned on May 21, 1969, and were cultivated. The results of their growth during 150 days, until October 25th, are summarized as follows: 1. The eggs began to hatch after 163 hours, at a water temperature of 15.9 to $17.4^{\circ}C$, and the hatching rate was $61.56\%$. 2. They reached the post-larval stage 6 to 7 days after hatching, and at this time a high mortality occurred. The mortality rate was 57.26 to $68.0\%$. 3. Sixteen days after hatching some of the larger fingerlings (6.7mm in total length) began attacking some of the smaller ones (4.6mm in to total length). 4. Twenty five to twenty eight days after hatching, the fish changed their food, and at this time a second high mortality occured. The total mortality rate amounted to 90.7 to $90.9\%$ of the total hatch. 5. After the fingerling stage. cannibalism occurs. The fish usually attack the caudal part of other fingerlings. It occurs regardless of body length and when the food supply is short. 6. The food coeffiicient at the age of 46 days (when body length is 53 to 68 mm) was 5.5 for short-necked clams, 8.5 for earth-worms, and 8.7 for fishes. 7. A third hish mortality occurred 53 to 63 days after hatching, the total mortality amounting to 95.76 to $97.34\%$, and the main cause of the mortality was found to be rickets resulting from nutritional deficiency 8. The growth rates were as follows: 2.68mm just after hatching, 3.84mm at the age of 10 days; 7.96mm after 25 days; 20.96mm or 130mg after 40 days; 73.68mm or 9.06g after 80 days: and 123mm or 31.8g after 150 days. 9. The water temperature during the above period was 15.7 to $28.4^{\circ}C$ with an average of $22.10^{\circ}C$ and the salinity was 25.53 to $34.50\%$ with an average of $32.07\%$, 10. The young of this species could endure well a wide range and sudden rise in salinity, and could survive easily when the salinity suddenly fell to $5\%$, but a considerable mortality occured when it fell to $3\%$. 11. When the fish were tranferred directly to fresh water from normal sea water they died out in 9 hours and 40minutes. However, when transferred from water of $5\%$ salinity at which they were reared for 54 days, they survived for 60 hours and 40 mimutes longer than in the former case.

• Korean Journal of Environment and Ecology
• /
• v.32 no.3
• /
• pp.323-331
• /
• 2018

This study was conducted to examine the effects of constructing streetside urban forests on particulate matter (PM) content in pedestrian paths and open spaces created between the main streets and buildings in a high-rise, high-density urban area. The study site is a 70m-wide open space between Busan City Hall and Jungang-street in Busan, Korea. The results showed that the density of PM differences between the open space and the adjacent main street were small in regions without linear trees and shrub rows during both the weekdays and weekend. On the other hand, the areas with linear trees and shrub rows were found to have significantly higher concentrations of PM compared to the roadway. In particular, sections with linear trees and shrub rows had higher PM levels both on roads and in adjacent open space, indicating that the composition of linear trees and shrub rows increased the concentration of PM in the off-street open space in areas with wide space between the roadway and building. The impact was more significant in the open space than the roadway. This phenomenon can be explained by the fact that PM generated by vehicles flows through the roadside shrubs by rapid wind flow but does not disperse widely in the pedestrian paths where the wind flow was reduced. In this study, we found that the roadside tree and shrub walls slowed the flow of wind, causing vehicle-emitted PM to accumulate if a wide open space was created between the road and building, resulting in higher concentration of PM in the open space. We confirmed that the distance between the road and building was a critical factor for constructing linear trees and shrub rows to reduce PM generated by vehicle traffic.

• Journal of the Korean association of regional geographers
• /
• v.6 no.2
• /
• pp.21-40
• /
• 2000

The retail trades in many countries have changed recently according to the high quality, diversification, and marked individuality of consumer needs. Under the continually competing system of the WTO agreement, corporations based in the USA and the EU try to raise their market share in other countries so it is inevitable for Korean retail enterprises to compete with them. This paper is aimed at contributing to the efficient growth for Korean retail trade from the analysis of the development process in retail trade and its changing locations comparing Korea and the USA. Retailers in the USA have practiced diversified marketing strategies considerably in order to survive in a rapidly changing retailing environment. American retailing, which has the most advanced marketing system in the world, has been of growing concern to marketing strategies in Korea. The following is a brief summary of this study. 1. Speedy and higher quality consumption is needed in accordance with the great increase in the single-family household and the female labor force participation both in Korea and in the USA. Senior citizens have become a new consumer group due to the aging population. In the future the retail trade will switch over to diversified retail formats and internet shopping as countries are transformed into information and communication societies. 2. In Korea, the former retail system characterized by markets and department stores has been greatly changed since the late 1980s with emphasis on high quality and convenience in consumption behaviors, with large domestic enterprises and foreign distribution corporations participating in Korean retailing. In the USA, retailing mergers and takeovers by major retails, bankruptcies, and extra-large shopping centers have emerged since the late 1980s. Recently, the USA retailing formats have been changed from the lower price-oriented discount types to the large scale theme parks. Much emphasis was put on entertainment, resorts, and convention centers. On the other hand, non-store types, such as the internet shopping, the CATV shopping, as well as catalog and mail-order sales are drastically increasing, although the proportion of their sales is low up to now. 3. In Korea, most of the retail facilities are concentrated in Seoul and the Metropolitan Region, and the distribution ratio of facilities came to 52% in 1997. The periodic markets, traditional markets which open on a periodic basis, are located mainly in Chollanam-do and Kyungsangbuk-do. The large-sized discount stores have expanded their locations to the over-crowded apartment complexes in new towns, located in the Metropolitan Region, and the large provincial cities, unlike the suburban locations in the USA. Therefore we needed to give attention to the locational relations in retail facilities between Seoul & the Metropolitan Region and rural settlement areas. In the USA, urban areas grew quickly with the development of the automobile in the 1920s, and the location of stores changed from a dispersed style centering around rural areas to a centralized one in urban areas. There is an accelerated growth for suburban areas, which have grown rapidly since 1950. As the membership warehouse clubs were introduced in the 1970s, the decentralization of location was more intensified. On the other hand, inner cities were revitalized by rearranging existing facilities to cope with suburban areas. And the location-free virtual retailing & TV shopping are also growing every year. 4. In view of the above, the continuous and desirable development devices in Korean retail trade are summarized as follows: First, the countermeasures against economies of scale, increase in retailing sales, and rise of a employment percentage in retailing are in need. Second, a scheme of lowering the proportion of food retail sales, and increasing a ratio of durable goods sales need to be worked out. Third, the original ideas are needed to apply positively information, communication and technology to retailing, to graft the traditional types on modem ones based on the social culture. Fourth, strategies are needed to strengthen the competitiveness of our retail trade through cooperation and chains of smaller retailers, the large enterprises participating in the distribution industry. Fifth, in order to realize the above, the retail industry, the administration, and the academic world should support the retail segment with concern and a practical strategy plan.

• Broadcasting and Media Magazine
• /
• v.11 no.4
• /
• pp.104-117
• /
• 2006

In this Paper, we analyze the application of Interactive Data Broadcasting in DMB(Digital Multimedia Broadcasting) in the accordance with convergence of service and technology. With the acceleration of digital convergence in the Ubiquitous period substantial development of digital media technology and convergence of broadcasting and telecommunication industry are being witnessed. Consequently these results gave rise to newly combined-products such as DMB(Digital Multimedia Broadcasting), WCDMA(Wide-band code division multiple access), Wibro(Wireless Broadband Internet), IP-TV (Internet protocol TV) and HSDPA(High speed downlink packet access). The preparatory stage for the implementation of Interactive Data Broadcasting Service will be reached by the end of December, 2006. DMB is the first result of a successful convergence service between Broadcasting and Telecommunication in new media era. Multimedia technology and services are the core elements of DMB. The Data Broadcasting will not only offer various services of interactive information such News, Weather, Broadcasting Program etc, but also be linked with characteristic function of mobile phone such as calling and SMS(Short Message Service) via Return Channel.

• Journal of Korean Society of Forest Science
• /
• v.73 no.1
• /
• pp.63-69
• /
• 1986

In general, the snow injury in forestry is an unusual disaster. The degree of snow injury varies greatly depending on stand density and the local topography. This study was conducted to investigate the snow injury in analyzing the demaged by snow-fall in Jinju, Gyeongsangnamdo. The results obtained were summarized as follow; Among 466 total damaged trees, 425 trees were broken and 41 trees were uprooted, the ratio of damage were 5.22%, 2.49%, 0.92% and 0.2% for Pinus densiflora, Pinus thunbergii, Pinus rigida, Alnus hirsuta respectively. The 95% of the damage trees were in the range of 3 to 11 m for height and in the range of 3 to 20 cm for D. B. H.. The directions of the damage trees had a large influence by direction of the wind, but they shown at high tendency to aspect of the slope relatively. The 82% of the damaged trees ranged from 11 to 24 age. The ratio of broken height ($H_B/H$) indicated that the damage was most frequent in the part of stem as 24%, 45%, 31% in the part of the root collar (0.1), stem (0.2-0.4), crown (0.5-1.0) respectively. In general, trees with stem-form coefficient ($H_B/D$) over 0.7-0.8 are apt to suffer by snow damage. The average of stem-form coefficient of trees in this area was 1.06. Therefore, the ratio of damage was high tendency as 3.14%. These results indicate that it is necessary to apply pertinent tending which will increase in resistance of snow damage. As avalanches from the flank of soil erosion rise in an importance matter in present, it should also be considered to measures for prevention and restoration.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.975-984
• /
• 2018

Fast pyrolysis bio-oil has unfavorable properties that restrict its use in many applications. Among the main issues are high acidity, instability, and water and oxygen content, which give rise to corrosiveness, polymerization during storage, and a low heating value. Esterification and azeotropic water removal can improve all of these properties. A 500 g of Quercus mongollica which grounded 0.8~1.4 mm was processed into bio-oil via fast pyrolysis for 2 seconds at $550^{\circ}C$. The esterification consists of treating pyrolysis oil with a high boiling alcohol like n-butanol at $70^{\circ}C$ under reduced pressure (100 hPa). All products are analyzed for water mass fraction, viscosity, higher heating value, pH, FT-IR and GC/MS. The water mass fraction can be reduced by 91.4 % (from 31.5 % to below 2.7 %), the viscosity by 65.8 % (from 36.5 to 12.5 cP) and the higher heating value can be increased by 96.8 % (from 3,918 to 7,712 kcal/kg), the pH by 1.3 (from 2.7 to 4.0). FT-IR and GC/MS analysis indicated that labile acids, aldehydes, ketones and lower alcohols were transformed to stable target products. Using this approach, the water content of the pyrolysis oil is reduced significantly. These improvements should allow the utilization of upgraded pyrolysis liquids in standard boilers and as fuel in CHP (Combined heat and power) plants.