• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.241-243
• /
• 1999

This paper describes a series of experiments investigating the operational characteristics of high-Tc superconducting synchronous motor of five to six hundred watts capacity. In this experiment, ac 220V stator phase voltage and DC 4A excitation current are used, and the synchronous speed runs at 1800rpm. Hall Sensors are installed on the pole face and at the side of the Ag/Bi-2223 high-Tc superconducting tape in order to analyze the effect of the time-varying magnetic field on the motor performance when the load changes its value. The experimental observations are compared with the theoretical predictions.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.98-100
• /
• 1998

This paper presents the fluid characteristics simulation and design guide line of the fluid path inside the rotor, which has an high-Tc superconducting field winding using Ag sheathed BSCCO-2223. The analysis was conducted with an equivalent model of the high-Tc superconducting synchronous motor under transition condition that occurs during the load varying from 250watt to 500watt. The results show that the designed fluid circulation system performs adequately in maintaining the superconducting state in the winding.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.340-342
• /
• 1998

This paper presents the ac losses simulation in the rotor having an high-Tc superconducting field winding using Ag sheathed Bi-2223. The analysis was conducted with an equivalent model of the high-Tc superconducting motor under transition condition during the load that varies from 250watt to 500watt. The simulation results show that the transient state lasts for about 2 seconds, and the ac losses decreased exponentially from the initial value above 2 watts.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.2163-2166
• /
• 2004

For designing high Tc superconductor proceeding bearing(HTSJB) which is used on a flywheel energy storage system which requests the free of the bearing loss caused by the friction, it is necessary to understand the basic characteristics of the classical superconductor proceeding bearing because the mechanical characteristics of the HTSJB are identified by the magnetic relationships between the permanent magnet(PM) and the high Tc superconductor(HTS). In this paper, using the method, frozen image model, the force problems between the PM and the HTS were solved and then the dynamic characteristics of the rotor inside of the HTSJB can be expected in advance by using the basic characteristics between the PM and the HTS. The coefficient of friction of the HTSJB was measured in the vacuum environment. From the results, the mechanical characteristics of HTSJB can be identified using the numerical models.

• Journal of the Korean Ceramic Society
• /
• v.29 no.2
• /
• pp.95-100
• /
• 1992

A high-Tc superconducting phase was obtained using long sintering time of 210 hours. From XRD and SEM analyses, it could be confirmed that the particles were plate phase, of which the structure is tetragonal system with lattice parameter a=b=5.44${\AA}$, C=37.18${\AA}$. Resistance and current density measurements were carried out using 4 probe method. The experimental data revealed that the stable high-Tc superconducting phase was easily formed by addition of Pb to Bi-system. Therefore, we could find the sintering condition to synthesis the system having the largest fraction of high Tc phase.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.05a
• /
• pp.34-37
• /
• 1994

.In this study, we measured Ic depending on a curvature radios of High Tc superconducting tapes which were made of a single wire, two and three WIT(wire in tube). Wires are manufactured by the process of press ins and sintering (150h, at 845$^{\circ}C$ ) for the growth of 2223 high Tc Bi superconducting phase. We know that Ic of a single wire decrease with reduction of a curvature radius. The maximum Ic of 2 WIT wire is 2.54 (A) and have a better characteristic than a single wire (0.89 A) at a curvature radius 75mm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.34-35
• /
• 2007

A high Tc superconducting with a nominal composition of BSSCCO was prepared by the citarte method. The solid precursor produced by the dehydration of the gel at $120^{\circ}C$ for 12h is not in the amorphous state as expected but in a crystalline state. X-ray diffraction peaks of nearly the same angular position as the peaks of high Tc phase were observed in the precursor. After pyrolysis at $400^{\circ}C$ and calcination at $840^{\circ}C$ for 4h. the (001) peak of the high Tc phase was cleary observed.

• Journal of radiological science and technology
• /
• v.30 no.3
• /
• pp.259-263
• /
• 2007

For the preparation of $^{99m}Tc$-labeled RBC, $10{\sim}20\;{\mu}g/kg$ of Stannous(II) chloride and $10{\sim}40\;min$ of preparation was used. For finding out the effect of contrast agent, the blood samples were collected in three days, seven days, and 1 months after the diagnostic procedure. In the normal volunteer, the concentration of reducing agent and preparation time did not effect on the radiochemical yield. But in the patients, 10 mg of Stannous(II) chloride and 60 min incubation times was shown high radiochemical yield. Contrast agent has a significant effect on the radiochemical yield. Although the blood samples which were collected after seven days of diagnostic procedure did not effect on the radiochemical yield of $^{99m}Tc$-labeled RBC, but the radiochemical yield of $^{99m}Tc$-labeled RBC which was prepared with a sample of high concentration of contrast agent in blood led to low radiochemical yield. For these samples, the modified method showed high radiochemical yield than previous in vivo preparation method. The recommended method is followed. Blood collecting was performed at 30 minutes after injection of reducing agent, and it is centrifuged for removal of plasma. After addition of $^{99m}TcO^-_4$, sample reservoir was rotated. After addition of normal saline, and it is centrifuged for separation of saline. Then $^{99m}Tc$-labeled RBC was obtained after removal of saline.

• Nuclear Medicine and Molecular Imaging
• /
• v.43 no.1
• /
• pp.48-54
• /
• 2009

Purpose: There are few studies evaluating the usefulness of dedicated high-resolution scintimammography and no studies using delayed washout with this dedicated high resolution scintimammography for the evaluation of breast lesions. We underwent this study to evaluate the clinical usefulness of Tc-99m MIBI in evaluating patients with palpable breast lesions using dedicated high-resolution scintimammography. Materials and Methods: This study included 19 patients with 23 palpable breast lesions who underwent mammography. Tc-99m MIBI was taken to further characterize these lesions. Scintimammography images were acquired with standard craniocaudal and mediolateral oblique views and delayed images were additionally taken. Final conclusions were based on histopathology, either by biopsy or mastectomy results. Results: Eighteen lesions were malignant and five were benign. Mammography was indeterminate for thirteen lesions, nine of those were malignant. Mammography also categorized one lesion as benign in a dense breast, but scintimammography and pathology results showed malignancy. Of the five benign lesions, two were visible on scintimammography, but delayed images showed washout. Conclusion: Based on our preliminary results, dedicated high resolution scintimammography seems to be very useful in characterizing palpable lesions that were indeterminate or negative on mammography.

• The Korean Journal of Nuclear Medicine
• /
• v.33 no.1
• /
• pp.84-93
• /
• 1999

Purpose: We investigated the direct labeling method of antibody with $^{99m}Tc$ and $^{188}Re$ and examined the stability and function of these labeled compounds in in vitro and in vivo. Materials and Methods: Disulfide bond of nonspecific human IgG was reduced to -SH group by 2-mercaptoethanol. Stannous ion was used to reduce $^{99m}Tc$ and $^{188}Re$. The stability of $^{99m}Tc$-IgG and $^{188}Re$-IgG was estimated upto 24 hrs. Biodistribution was evaluated in abscess bearing rats at 4 and 24 hr post-injection of $^{99m}Tc$ or $^{188}Re$ labeled IgG. Results: The number of -SH group per reduced IgG molecule was 2.34. The labeling yield of $^{99m}Tc$-IgG and $^{188}Re$-IgG were 90% and 95%, respectively The stability of $^{99m}Tc$-IgG at 1, 4, 6 and 24 hr was 91%, 83%, 78%, 7% and that of $^{188}Re$-IgG at 1, 4, 16 and 24 hr was 94%, 80%, 47%, 42%, respectively. At 4 hr post-injection of $^{99m}Tc$-IgG, high uptake was found on kidney, blood, stomach and abscess ($9.42{\pm}0.68,\;1.43{\pm}0.24,\;0.86{\pm}0.18,\;0.72{\pm}0.10$ %ID/g, respectively). The uptakes at 24 hr were kidney, abscess,.itomach, and blood in descending order. In case of $^{188}Re$-lgG, high uptake at 4 hr post injection appeared on kidney, blood, abscess and stomach ($3.92{\pm}0.62,\;1.32{\pm}0.08,\;0.88{\pm}0.01,\;0.26{\pm}0.06$, respectively). The uptakes at 24 hr were kidney, abscess, blood and stomach in descending order. The abscess to blood uptake ratio of $^{99m}Tc$-IgG was 0.5 at 4 hr and 2.02 at 24 hr and that of $^{188}Re$-IgG was 0.67 and 1.29. Conclusion: $^{99m}Tc$-IgG and $^{188}Re$-IgG canbe labeled efficiently with direct labeling method. However, $^{99m}Tc$-IgG and $^{188}Re$-IgG, labeled with direct method, was unstable. Further study is needed to enhance the stability of the antibody labeling.