• Journal of the Korean Society of Costume
• /
• v.66 no.6
• /
• pp.110-121
• /
• 2016

The purpose of this study is to develop high value-added uniform design in response to climate change, and produce high sensitivity uniforms that conserve the energy of its wearers. The scope of the study encompassed entire production stage from the product planning stage to developing a prototype to collecting consumer ratings to securing intellectual property. The results of the study are as follows. First, the material was developed that maximizes insulation by replicating human body heat radiation and raising the temperature by 5 degree Celsius. Second, through Time to Market system, a luxurious synthetic wool material was developed, and warm effect was achieved. Third, pattern design engineering for easy movement and design development allowed the realization of uniform design that is compatible indoors and outdoors as well as respond to highly active climate change. Fourth, Fifth, the developed design was registered and intellectual property rights were obtained.

• New & Renewable Energy
• /
• v.16 no.1
• /
• pp.68-76
• /
• 2020

Operational testing of the THIOPAQ^® facility that removes H₂S from landfill gas was performed for 746 days. The average H₂S removal efficiency was 99.4%, and the input quantities of air, NaOH, and nutrients per sulfur load were 13.1 ㎥/ton, 1.5 ㎥/ton, and 28.7 L/ton, respectively. The purity of the bio-sulfur produced from the facility was 94.8%, with 3.3% impurities, except for moisture. X-ray photoelectron spectroscopy showed that the compositional contents of amino acids and free amino acids of the bio-sulfur surface were 5,308 and 728 mg/kg, respectively. The mean particle size was 3.41 ㎛, which was much smaller than that of chemical sulfur. Based on these results, a high H₂S removal rate of more than 97% is feasible, and high value-added bio-sulfur, which is used as a fungicide because of its hydrophilic characteristics and small size, can be obtained at this facility.

• The Journal of the Korea Contents Association
• /
• v.13 no.5
• /
• pp.420-435
• /
• 2013

Film industry is a high value-added industries, and boosts the self-esteem of the people, as a measure of a country's culture, the country's strategic industries. However, China's film industry, making elevated by an exclusive screening sector consists unprofessional experiencing difficulties, such as investment, high taxes, and entrance fees, disparities between urban and rural development, piracy. To solve these problems, this study used the literature research methods, including books, papers related to domestic research. The results shows that china's film industry need to reform the production, distribution, screenings and build a plan such as the reasonable admission fee, movie-related professional manpower, additional market activation, and the balanced development of the theatre chain, the expansion of the global market space.

• Journal of Fashion Business
• /
• v.14 no.4
• /
• pp.91-101
• /
• 2010

This paper has the purpose of suggesting a development-method on the fashion products that would secure the competitiveness in the global markets through creating supersensitive practical products on the basis of developing originative fashion-goods being made of jacquard that is fine quality of couture. This paper has collected data through the cases of the developed nations in fashion, precedent studies and all the related literature on the subject. The results of this researching are as following: The first, it is expected that the necessity of developing new fashion products would be appealed toward the prestige group of consumers who are seeking for the fine quality and super-sensitivity in female fashion in Korea, and it is the current situation that the products made of jacquard are gradually expanding not only in the area of apparel, fashion goods and interior but also another areas. The current situation of the global market suggests the necessary strategy of survival, that is, the development of supersensitive materials and creative products which would be able to keep the high quality and lower the selling price through cost reduction. The second, the suggestion of the direction in developing the products of the female fashion made of jacquard has two points - the development of the texture that would realize a unique form and the development of the material that would be able to realize planar pattern and three dimensional pattern which are woven with thin and light materials with various solidity and delicacy through various techniques of mixing and three dimensional expression. The third, the expected ripple effect and utilization generated from the development of fashion products are as followings: As material characteristics of jacquard, It needs the specialization of various techniques and specialized production system in using jacquard, and the specialized technique and system would make it possible to produce not only the higher value-added products through expressing affluent colors and delicate design but also competitive products through cutting the process and cost, eventually, it would lead to the expansion of the jacquard market of super-sensitive prestige. Therefore, it is remarkable that various development of products toward the global market and the prestige female fashion market can suggest the vision that make the national fashion industry develop into the higher value-added knowledge industry integrating technology and culture.

• Korean Chemical Engineering Research
• /
• v.61 no.2
• /
• pp.175-188
• /
• 2023

Global interest in hydrogen energy is increasing as an eco-friendly future energy that can replace fossil fuels. Accordingly, a next-generation hydrogen production technology using microorganisms, nuclear power, etc. is being developed, while a lot of time and effort are still required to overcome the cost of hydrogen production based on fossil fuels. As a way to minimize greenhouse gas emissions in the hydrocarbon-based hydrogen production process, methane direct decomposition technology has recently attracted attention. In order to improve the economic feasibility of the process, the simultaneous production of value-added carbon materials with hydrogen can be one of the most essential aspects. For that purpose, various studies on catalysis related to the quality and yield of high-value carbon materials such as carbon nanotubes (CNTs). In terms of process technology, a number of the research and development of fluidized-bed reactors capable of continuous production and improved gas-solid contact efficiency has been attempted. Recently, methane direct decomposition technology using a fluidized bed has been developed to the extent that it can produce 270 kg/day of hydrogen and 1000 kg/day of carbon. Plus, with the development of catalyst regeneration, separation and recirculation technologies, the process efficiency can be further improved. This review paper investigates the recent development of catalysts and fluidized bed reactor for methane direct pyrolysis to identify the key challenges and opportunities.

• The Journal of the Korea Contents Association
• /
• v.8 no.11
• /
• pp.134-143
• /
• 2008

The significance of the image content industry, as a flagship industry of the cultural content industry, is emerging globally as a high value-added trend. Since the movie industry has diverse related industries along with a positive spillover effect from cultural and economic perspectives, it ultimately strengthens national brands as well as national competitiveness. As a national strategy cultural content industry, the movie industry in each country around the world utilizes its own diverse self-protective systems. The Korean movie industry has emerged as a 10 million-strong movie-goer market; however, in reality, it is vulnerable to high film production costs and utility. The current domestic media market demands a new paradigm through the media industry as a whole; nonetheless, it is inherently limited to past film production and distribution channels. In this study, I seek to evaluate the status quo and propose a new direction for the Korea movie industry.

• Textile Coloration and Finishing
• /
• v.22 no.3
• /
• pp.282-291
• /
• 2010

Digital textile printing(DTP) is becoming more important because the production trend of textile printing goods is adapting to small-lot multiple items. Recently enhanced use of DTP is closely connected with production of high value-added products in fashion industry, which is also appropriate for quick response system(QRS). Quality of DTP depends on pre-treatment, after-treatment, ink, media, printer, etc. One of these parameters, Selection of good media is very important to obtain high quality of DTP products. Especially, the effects of media on printing quality of DTP according to yarn twist and structure of knitting fabric were examined in this study. Two types of yarn twist of 830 t.p.m and 1630 t.p.m for cotton knit were used and five types of media structures were knitted with single circular knitting machine. First, MIU, MMD, SMD's values are closely related with surface roughness of sample as well as printing quality. The hard twist samples were higher values than normal twist samples in the same media structure. In case of SMD, the values increased from plain to corduroy types. Second, aspect of line sharpness, line area, and line width values of hard twist samples decreased from plain to corduroy than those of normal twist samples. Third, line deviation values of hard twist samples, blurriness of line, also decreased than those of normal twist samples.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.6
• /
• pp.513-520
• /
• 2016

Many surface protection methods have been developed to apply to constructional steels which have been used under severe corrosive environments. One of these methods, hot dip galvanizing is being widely used to the numerous constructional steels such as a guard rail of high way, various types of structural steel for manufacturing ship and for some other industrial fields etc.. Recently, the cost of zinc is getting higher and higher, thus, it is considered that improvement of hot dip galvanizing process to reduce the cost of production should be developed possibly. In this study, additives such as acid cleaning solution, $NH_4OH$, $Al(OH)_3$ and $H_2O_2$ were added to flux solution, and omission of water washing treatment after acid cleaning was investigated with some types of flux solutions added with some additives mentioned above. The decrement of pH by adding the acid cleaning solution could be controlled due to neutralization reaction with addition of $NH_4OH$. The flux solution added with both $NH_4OH$ and $Al(OH)_3$ exhibited nearly the same color and pH value as those of orignal flux solution with no added, and the sample dipped to the flux solution which was added with additives mentioned above indicated a relatively good corrosion resistance compared to other samples. However, the flux solution added with $NH_4OH$, $Al(OH)_3$ and $H_2O_2$ exhibited a different color, sediment and a bad corrosion resistance. Consequently, it is considered that omission of water washing treatment may be able to perform by adding optimum additives to the original flux solution.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.11
• /
• pp.1625-1633
• /
• 2003

This study was conducted to observe effects of dietary acidogenicity value (AV) on rumen fermentation characteristics and nutrients digestibility. The AV of feedstuffs was based on the dissolution of Ca from $CaCO_3$ powder added at the end of a 24 h in vitro fermentation. Three diets were formulated to be iso-energetic and iso-nitrogenous with different AV. Two experiments were involved in this study. In experiment 1, it appears that pH, $NH_3-N$ concentration and A:P ratio tended to decrease, but gas production, VFA production and DM disappearance tended to increase with increasing dietary AV. In experiment 2, the rumen pH tended to decrease in order of high AV>medium AV>low AV treatment, respectively. There were no significant effects of dietary AV on $NH_3-N$ concentration, enzyme activity and nutrient digestibility. In addition, total VFA and individual VFA concentrations tended to increase with increasing dietary AV without significance. In fact, we hypothesized that different dietary AV would affect rumen fermentation and nutrients digestibility because dietary AV was adjusted with fermentable carbohydrate sources. The present results indicate that differences in dietary AV between treatments were too small to affect rumen fermentation and its effects were minimal.

• Journal of Animal Environmental Science
• /
• v.18 no.1
• /
• pp.9-18
• /
• 2012

The output of Korea's livestock industry represents about 40% of the total agricultural production, making it the most high value-added sector in the entire agricultural and forestry industry. However, the fatal epidemics such as foot-and-mouth disease and avian influenza spurs demands for the advanced management of livestock production with IT technologies. U-Livestock means the application of ubiquitous technologies to livestock production. In this study, U-Livestock service models are established on the basis of the life cycle of livestock by using local and overseas cases. The objectives, contents, and structures of service models are required to be designed in detail respectively. The integration of such service models is expected to he1p modernize the livestock industry and raise the productivity of sector.