본 연구에서는 낙엽송재(Larix Kaemferi Carr.)를 대상으로 100℃부터 130℃까지의 고온영역에서 10℃ 간격으로 처리시간을 10분, 30분, 60분간으로 하여 수증기처리 후 처리재의 물리적 특성 등을 검토하였으며, 오토클레이브를 사용 처리하였다. 휨강도와 압축강도는 처리온도의 증가에 따라 약간씩 감소하는 것으로 나타났다. 그러나 수증기처리한 목재강도와 처리온도 사이에는 명확한 결과가 나타나지 않았다. 120℃에서 130℃의 온도범위에서 세포벽 내의 성분과 조직이 변화하는 것으로 생각되는데, 이것은 응력의 해소에서 기인되는 것으로 생각되었다. 수분흡수성은 고온수증기처리조건에 의한 변화가 없는 것으로 나타났다. 결론적으로 본 실험의 범위에 있어서 목재의 물성은 처리 온도조건보다는 목재밀도의 영향을 많이 받고 있는 것으로 판단되었다.
본 연구는 낙엽송(Larix Kaemferi Carr.)재를 이용하여 100℃부터 180℃까지의 고온영역에서 20℃ 간격으로 처리시간을 10분, 30분, 60분, 90분간으로 하여 처리조는 봄베를 사용하였다. 1) 고온수증기처리의 처리시간이 길고, 처리온도가 높을수록 밀도의 감소도 커졌다. 2) 밀도의 감소에도 불구하고 고온수증기처리재의 수축율이 control재와 비교하여 비슷하거나 높게 나타나는 것은 수증기처리에 의하여 세포벽 내부의 구성성분 및 구조변화에 의하여 야기된 것으로 판단된다. 3) 고온수증기처리에 의하여 추정목재의 틀어짐은 감소되었다.
The temperature changes of dumpling(mandu) during cooking process were examined and the effects of time-temperature and/or time-size interactions on internal temperature were studied. Mandu was purchased from local markets and classified by its weight(small, medium, and large). Boiling, steaming, pan frying, and deep fat frying were adopted. Internal temperature was measured with a food thermometer in every one minute. The internal temperature of mandu increased over time in every cooking process(p<0.05). After three minutes the internal temperature of mandu in boiling, pan frying, and deep fat frying reached over at $74^{\circ}C$, which is high enough temperature to kill the harmful bacteria, but not in steaming. The internal temperature of mandu was significantly affected by cooking time, size, and both in boiling, steaming, and deep fat frying(p<0.05). There were significant differences between the internal and surface temperatures of mandu in the cooking processes except pan frying in three minutes(p<0.05). The results of this study indicate three minutes' cooking of the mandu by boiling, pan frying, and deep fat frying is safe enough to eat. However, longer steaming time is needed in order to reach safe temperature. This study also indicates the cooking time and size of mandu appear to be major factors in determining the internal temperature achieved at $74^{\circ}C$. More research is needed to check time to reach a safe temperature in the cooking process of mandu by steaming.
고급 홍삼의 생산 수율을 증가시키는 제어 방법에 관한 실험을 수행하였다. 수삼에서 홍삼을 만드는 과정 중 수증기로 수삼을 찌는 증삼 공정에서 동체균열, 내공, 내백 등이 발생하는데 이는 홍삼의 품질을 저하시키는 원인이 된다. 고급 홍삼의 수율을 증가시키기 위해서는 이런 불량 요인을 최소화하는 방법이 필요하다. 최근까지 대부분의 증삼 공정의 제어는 증삼 과정의 필수 인자인 온도만을 조절하거나 온도와 압력을 동시에 조절하여 제어하는 방법이 연구되었다. 그러나 이는 불량 요인을 최소화하는 목적에 적합하지 못한 것으로 보인다. 이와 달리, 본 연구에서는 기존의 홍삼 제조 방식을 토대로 $96{\sim}99^{\circ}C$의 온도를 유지하면서 수삼의 무게 제어를 통하여 불량 요인을 최소화하는 제어 방법을 제시한다. 무게 제어를 적용한 실험 결과 증삼 과정 후 수삼의 동체균열의 불량요인이 줄어드는 것을 확인할 수 있었다.
본 연구는 $100^{\circ}C$ 이상의 고온영역에서 증기처리에 의한 소나무(Pinus densiflora)재와 라디아타소나무(Pinus radiata)재의 전단강도를 조사하였다. 본 연구에서 사용한 열처리 조건은 온도조건 $100^{\circ}C$부터 $200^{\circ}C$까지 $20^{\circ}C$ 간격으로 6조건과 시간조건 5, 10, 20, 30분의 4조건이었으며, 폭쇄처리기를 사용하였다. 고온에서 증기처리에 의해 목재구성요소의 감소가 전단강도의 감소로 나타나고 목질재료의 광범위한 가소화를 진행시키는 것으로 판단된다. 목재의 전단강도는 증기처리시간에 따라서 점차적으로 감소한다는 것을 알 수 있었다. 10분 이상의 증기처리시간일 경우 온도가 올라갈수록 전단강도의 감소가 눈에 띄게 커졌다. 고온에서 증기처리에 의한 연화는 목재가공성 향상에 필요하다고 생각된다.
This study examines both strength development and pore volume of high temperature curing mortar, using a blast-furnace slag powder (BFS). This study experiments with various pre-steaming period, differing curing temperature and the replacement of BFS. According to the results, the strength development of BFS mortar is stronger when higher curing temperature are used(as opposed to standard curing). Also, regardless of the curing method, pore volume decreases as the curing time increases. From these results we can identify the optimum conditions required pre-steaming period, differing curing temperature and the replacement to produce BFS mortar properties.
토란분말의 가공 활용도를 높이기 위해서 열풍건조, 동결건조, 건조 후 로스팅 및 증자 후 건조 처리하는 가공공정을 이용하여 토란분말을 제조하였으며, 이들의 영양성분 및 이화학적 특성의 변화를 관찰하여 가공적성을 검토하였다. 토란분말의 수분함량과 식이섬유 함량은 열풍건조 온도가 높아질수록 감소하였고 비타민 C 함량은 동결 건조한 토란분말에서 가장 높았다. 건조 후 로스팅하거나 증자 후 건조 처리한 토란분말의 식이섬유 함량은 열풍 건조나 동결 건조한 분말에 비해 감소하였다. 수분흡수지수는 상대적으로 증자 후 건조 처리한 분말에서 높게 나타났고 수분용해 지수는 열풍건조 및 동결 건조한 토란분말에서 높게 나타났다. DSC를 이용한 토란분말의 호화 중 열역학적 특성은 열풍건조와 동결 건조한 토란분말에서 유의성 있는 차이를 보이지 않았으며, 건조 후 로스팅 처리 온도가 높아질수록 호화개시온도와 최대호화온도는 감소하였다. RVA 특성에서는 열풍 건조 시 온도가 높아질수록 호화개시온도가 점차 낮아지고 최고점도는 증가하였으며 전분입자가 붕괴되기 쉬운 정도를 나타내는 breakdown과 냉각 후 노화의 정도를 나타내는 setback의 수치도 높게 나타났다. 반면 증자후 건조 처리한 토란분말은 최고점도가 높게 나타났으나 breakdown 및 setback의 수치는 낮게 나타났다. 이상의 결과를 종합하여 볼 때, 열풍 건조한 토란분말의 경우 식이섬유 함량이 높으며, 호화 시 점도가 높아 반죽제품의 점도부여에 적합할 것으로 판단되며, 증자 후 건조 처리한 토란분말의 경우 수분흡수지수가 다른 처리분말에 비해 높고 호화 시 점도가 높으면서 노화를 지연시키는 작용을 하기 때문에 죽이나 후레이크 같은 분말제품이나 dough의 첨가제로 활용할 수 있을 것으로 기대된다.
The effects of two-step fixation of steaming and baking on the dischargeability of cotton fabrics dyed with C.I. Reactive Black 5(Bl-5) were investigated when the concentrations of $K_2CO_3$ and benzaldehyde sodium bisulfite(BASB) were increased over 120/kg. Remarkably increased dischargeability resulted from baking for 3 min or more at 160t after steaming for 8 min or more at $102^\circ{C}$, but 120g/kg or more amounts of $K_2CO_3$ and BASB(50%) had little influence on dischargeability. Therefore the discharge mechanism can be suggested that covalent bonds between cellulose and Bl-5 undergo $S_N2$ attack by hydroxide ion formed by the reaction of $K_2CO_3$ and water in steaming at $102^\circ{C}$ first and then, through transition states they are cleavaged in baking at 160t to yield hydrolyzed Bl-S and compounds of BASB and Bl-5 isolated from fiber, which are undyeable and removed by washing. The effect of urea, one of the hydrotrope agents, on discharge printing was also studied. The result which dischargeability was greatly improved by increasing the steaming time from 8 min to 15 min at $102^\circ{C}$ or by increasing the amount of urea obviously shows that water in steaming and urea in print paste play an important role in discharge printing. And as an increase of the baking time from 5 min to 7 min at $160^\circ{C}$ makes it possible to improve dischargeability, it is once more confirmed that high temperature of about 160t is exactly required to discharge the dyed Bl-5. The colored discharge printing demands a more amount of urea because urea contributes to the putting color fixation as well as the discharge reaction.
The fixing behaviors of anthraquinone disperse dyes containing dimethylamino substituent, such as C. I. Disperse Violet 26(D.V.26) and C. I. Disperse Blue 14(D.V.14), or containing diamino substituent, such as C. I. Disperse Blue 73(D.B.73), and monochlorotriazinyl azo reactive dyes, such as C. I. Reactive Orange 13(R.O.13), C. I. Reactive Red 3(R.R.3). C. I. Reactive Yellow 2(R.Y.2) on polyester/cotton blend(P/C) fabrics were examined for the one-step printing of P/C fabrics. The high temperature steaming of $175^{\circ}C$ is the most satisfactory fixing method for P/C one-step printing with above disperse and reactive dyes among the four different fixing methods: $175^{\circ}C$ steaming, $102^{\circ}C$ steaming${\rightarrow}175^{\circ}C$ steaming, $190^{\circ}C$ thermosol, $102^{\circ}C$ steaming${\rightarrow}190^{\circ}C$ thermosol. $190^{\circ}C$ thermosol is unfit to fix R.R.3 and R.Y.2 whose heat stability is poor. It was found that D.V.26 and D.B.14 containing dimethylamino substituent are unstable for heat and alkali, but D.B.73 is stable for them to print P/C blend fabrics with R.O.13 which is also stable for heat. Therefore we found that D.B.73, R.O.13 and a pair of D.B.73 and R.O.13 were very suitable for one-step printing of P/C blend fabrics.
Background: The structural conversions in ginsenosides induced by steaming or heating or acidic condition could improve red ginseng bioactivities significantly. In this paper, the chemical transformations of red American ginseng from fresh Panax quinquefolium L. under steaming were investigated, and the possible mechanisms were discussed. Methods: A method with reversed-phase high-performance liquid chromatography coupled with linear ion trap mass spectrometry ($HPLC-MS^n$)-equipped electrospray ionization ion source was developed for structural analysis and quantitation of ginsenosides in dried and red American ginseng. Results: In total, 59 ginsenosides of protopanaxadiol, protopanaxatriol, oleanane, and ocotillol types were identified in American ginseng before and after steaming process by matching the molecular weight and/or comparing $MS^n$ fragmentation with that of standards and/or known published compounds, and some of them were determined to be disappeared or newly generated under different steaming time and temperature. The specific fragments of each aglycone-type ginsenosides were determined as well as aglycone hydrated and dehydrated ones. The mechanisms were deduced as hydrolysis, hydration, dehydration, and isomerization of neutral and acidic ginsenosides. Furthermore, the relative peak areas of detected compounds were calculated based on peak areas ratio. Conclusion: The multicomponent assessment of American ginseng was conducted by $HPLC-MS^n$. The result is expected to provide possibility for holistic evaluation of the processing procedures of red American ginseng and a scientific basis for the usage of American ginseng in prescription.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.