• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.3
• /
• pp.512-521
• /
• 2017

This paper reports development process of a university-based sounding rocket using simplified hybrid rocket propulsion system for low-altitude flight application. A hybrid propulsion system was tried to be designed with as few components as possible for more economical, simpler and safer propulsion system, which is essential for the small scale sounding rocket operation as a CanSat carrier. Using blow-down feeding system and catalytic ignition as combustion starter, 250 N class hybrid rocket system was composed of three components: a composite tank, valves, and a thruster. With a composite tank filled with both hydrogen peroxide($H_2O_2$) as an oxidizer and nitrogen gas($N_2$) as a pressurant, the feeding pressure was operated in blowdown mode during thruster operation. The $MnO_2/Al_2O_3$ catalyst was fabricated for propellant decomposition, and ground test of propulsion system showed the almost theoretical temperature of decomposed $H_2O_2$ at the catalyst reactor, indicating sufficient catalyst efficiency for propellant decomposition. Auto-ignition of the high density polyethylene(HDPE) fuel grain successfully occurred by the decomposed $H_2O_2$ product without additional installation of any ignition devices. Performance test result was well matched with numerical internal ballistics conducted prior to the experimental propulsion system ground test. A sounding rocket using the developed hybrid rocket was designed, fabricated, flight simulated and launch tested. Six degree-of-freedom trajectory estimation code was developed and the comparison result between expected and experimental trajectory validated the accuracy of the developed trajectory estimation code. The fabricated sounding rocket was successfully launched showing the effectiveness of the simplified hybrid rocket propulsion system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.141-142
• /
• 2005

To investigate the ZnO thin films which is interested in the next generation of short wavelength LEDs and Lasers, our ZnO thin films were deposited by RF sputtering system. At sputtering process of ZnO thin films, substrate temperature, work pressure respectively is $300^{\circ}C$ and 5.2 mTorr, and the purity of target is ZnO 5N. The thickness of ZnO thin films was about $1.9{\mu}m$ at SEM analysis after sputtering process. Phosphorus (P) and arsenic (As) were diffused into ZnO thin films sputtered by RF magnetron sputtering system in ampoule tube which was below $5\times10^{-7}$ Torr. The dopant sources of phosphorus and arsenic were $Zn_3P_2$ and $ZnAs_2$. Those diffusion was perform at 500, 600, and $700^{\circ}C$ during 3hr. We find the condition of p-type ZnO whose diffusion condition is $700^{\circ}C$, 3hr. Our p-type ZnO thin film has not only very high carrier concentration of above $10^{19}/cm^3$ but also low resistivity of $5\times10^{-3}{\Omega}cm$.

• Polymer(Korea)
• /
• v.26 no.5
• /
• pp.680-690
• /
• 2002

Implantable biodegradable wafers were prepared with pamidronate -loaded poly (L-lactide-co-glycolide) (PLGA, 75 : 25 mole ratio by lactide to glycolide, molecular weight : 20000 and 90000 g/mole) by direct compression method for the sustained release of pamidronate to investigate the possibility for the treatment of bone resorption. Pamidronate-loaded PLGA powders were prepared by means of physical mixing and spray drying with the control of formulation factors and characterized by scanning electron microscope and X-ray diffractometer. The pamidronate-loaded PLGA powders fabricated into wafers by direct compression under the constant pressure and time at room temperature. These wafers were also observed for their structural characteristic, release pattern, and degradation pattern. The release rate of pamidronate increased with increasing their initial loading ratio as well as increasing wafer thickness. The molecular weight of PLGA affects the release pattern : the higher molecular weight of PLGA, the faster release rate. It can be explained that the higher viscosity of high molecular PLGA solution at same concentration tends to aggregate PLGA and pamidronate resulting in unstable pharmaceutical dosage form. This system had advantages in terms of simplicity in design and obviousness of drug release rate and nay be useful as an implantable dosage form for the treatment of aural cholesteatoma.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.358-358
• /
• 2010

Ion beam bombardment at low energy forms nanosize patterns such as ripples, dots or wrinkles on the surface of polymers in ambient temperature and pressure. It has been known that the ion beam can alter the polymer surface that induces skins stiffer or the density higher by higher compressive stress or strain energies associated with chain scissions and crosslinks of the polymer. Atomic scale structure evolution in polymers is essential to understand a stress generation mechanism during the ion beam bombardment, which governs the nanoscale surface structure evolution. In this work, Molecular Dynamics (MD) simulations are employed to characterize the phenomenon occurred in bombardment between the ion beam and polymers that forms nanosize patterns. We investigate the structure evolution of Low Density Polyethylene (LDPE) at 300 K as the polymer is bombarded with Argon ions having various kinetic energies ranging from 100 eV to 1 KeV with 50 eV intervals having the fluence of $1.45\;{\times}\;1014 #/cm2$. These simulations use the Reactive Force Field (ReaxFF), which can mimic chemical covalent bonds and includes van der Waals potentials for describing the intermolecular interactions. The results show the details of the structural evolution of LDPE by the low energy Ar ion bombardment. Analyses through kinetic and potential energy, number of crosslinks and chain scissions, level of local densification and motions of atoms support that the residual strain energies on the surface is strongly associated with the number of crosslinks or scissored chains. Also, we could find an optimal Ar ion beam energy to make crosslinks well.

• Journal of Korean Society on Water Environment
• /
• v.29 no.6
• /
• pp.746-753
• /
• 2013

The aim of this study was to evaluate artificial fish shelter, which was known to increase prey survival and expand habitat space to improve species diversity and fish communities in a freshwater ecosystem. The experiment was performed at an outdoor test-bed for three months from 2011 by comparing the responses to adjustments in the volume of the artificial patch (juvenile fish shelter, JFS) in the control and experimental groups. Analysis of the environmental conditions over two periods (Period1 ~ 2) showed minor differences in the physichemical characteristics of water quality, phytoplankton, and zooplankton biomass, thus, allowing comparative analysis of feeding ecology. However, high water temperature conditions in Period1 ($25.6{\pm}2.0^{\circ}C$), affected the predation activity of the piscivorous fishes, Coreoperca herzi (C. herzi, size $89{\pm}4mm$). Survival rates of the prey fishes, Rhynchocypris oxycephalus (R. oxycephalus, size $29{\pm}1mm$), improved as the patch volume increased and were higher than those of the control group by 35.9 ~ 46.7%. Analysis showed that JFS reduced the chances of predator-prey encounter, and thereby minimized prey vulnerability.

• Korean Journal of Materials Research
• /
• v.4 no.7
• /
• pp.798-807
• /
• 1994

The increase in the resistance of $BaTio_{3}$ with addition of Ca is attributed to the formation ofthe acceptor impurity by $CaCa^{2+}$" which substitutes Ti4+. However, some authors suggested that $Ca^{2+}$ can not substitute $Ti^{4+}$ because of its larger ionic radius. In this work, the existence of acceptor by Ca hasbeen studied through the high temperature equilibrium electrical conductivity of $BaTiO_{3}$ codoped with Caand Nb, where Ba/(Ti+Ca+Nb) was kept equal to unity. It was measured at $1000^{\circ}C$, and the oxygenpartial pressure was controlled between $10^{-15}$ ~ 1 atm. Changing the amount of added Ca and Nbresulted in the compensation effect between donor and acceptor, i.e., Nb was compensated by the acceptor.And through the defect chemical interpretation of the measured data, it was concluded that Ti canbe substitued with Ca. The existence of such acceptor was reaffirmated by ICTS(Isotherma1 CapacitanceTransient Spectroscopy) measurements.oscopy) measurements.

• Korean Journal of Materials Research
• /
• v.18 no.10
• /
• pp.535-541
• /
• 2008

Growth behavior of InGaN/GaN self-assembled quantum dots (QDs) was investigated with respect to different growth parameters in low pressure metalorganic chemical vapor deposition. Locally formed examples of three dimensional InGaN islands were confirmed from the surface observation image with increasing indium source ratio and growth time. The InGaN/GaN QDs were formed in Stranski-Krastanow (SK) growth mode by the continuous supply of metalorganic (MO) sources, whereas they were formed in the Volmer-Weber (V-W) growth mode by the periodic interruption of the MO sources. High density InGaN QDs with $1{\sim}2nm$ height and $40{\sim}50nm$ diameter were formed by the S-K growth mode. Dome shape InGaN dots with $200{\sim}400nm$ diameter were formed by the V-W growth mode. InN content in InGaN QDs was estimated to be reduced with the increase of growth temperature. A strong peak between 420-460 nm (2.96-2.70 eV) was observed for the InGaN QDs grown by S-K growth mode in photoluminescence spectrum together with the GaN buffer layer peak at 362.2 nm (3.41 eV).

• Biomolecules & Therapeutics
• /
• v.7 no.3
• /
• pp.271-277
• /
• 1999

Safety evaluation of LB71350, a new HIV-1 protease inhibitor, was performed in mice, rats and dogs. For the general behavior of mice, LB71350 at an oral dose of 200 mg/kg did not show any significant effects on muscle tone and locomotor activity. In terms of central nervous system, at oral doses of 200 mg/kg and 1000 mg/kg, LB71350 inhibited acetic acid-induced pain response approximately 41% and 83% of control. respectively. At oral doses of 200 mg/kg and 500 mg/kg, it reduced the rectal body temperature in rats. Pentylenetetrazole-induced seizure in mice was slightly potentiated by oral administration of LB71350 at doses ranging from 200 mg/kg to 1000 mg/Ag. Single or five day treatment of LB71350 doubled the hexobarbital- induced sleeping time in mice at oral doses ranging from 50 mg/kg to 500 mg/kg. It did not cause any effects on gastric secretion and acidity in rat at oral doses of 200 mg/kg and 1000 mg/kg and also it did not change intestinal motility in mice up to 1000 mg/kg. Blood coagulation indices such as prothrombin time (PT), activated partial thromboplastin time (aPTT), and thrombin time (TT) in rats were not affected by the treatment of LB71350 up to 500 mg/kg. LB71350 caused no significant effects on the cardiac output, stroke volume, heart rate, and mean blood pressure when infused intravenously to the anesthetized rats and dogs. Taken together, LB71350 at high oral doses caused significant pharmacological effects on the central nervous system and the hexobarbital-induced sleeping time.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.110-112
• /
• 2006

Membrane electrode assembly (MEA) for polymer electrolyte fuel cell (PEFC) are commonly prepared in the research laboratory by spraying, screen-printing and brushing catalyst slurry onto membrane or other support material like carbon paper or polyimide film in a batch style. These hand applications of the catalyst slurry are painstaking process with respect to precision of catalyst loading and reproducibility. It has been generally mentioned that the adoption of continuous process is very helpful to develop the reliable product. In the present work, we report the results of using continuous type coater with doctor-blade to coat catalyst slurry for preparing the MEA catalyst layers In a faster and highly reproducible fashion. We show that while expectedly faster than batch style, the machine coater requires the use of slurry of appropriate composition and a properly selected transfer decal material in order to achieve superior MEA plat lnw loading reproducibility. To make highly viscous catalyst slurry that is imperative for using coater, we use 40wt.% Nafion solution and minimize the content of organic solvent. And the choice of proper high surface area catalyst is important in the viewpoint of making well-dispersed slurry. After catalyst coating onto the support material, we transferred the catalyst layer to both sides of Nafion membrane by hot-pressing In this case, the degree of transfer was Influenced by hot-pressing condition including temperature, pressure, and time. To compare the transferring ability, we compared so many films and detaching papers. And among the support, polyethylene terephthalate(PET) film shows the prominent result.

• Korean Journal of Organic Agriculture
• /
• v.19 no.spc
• /
• pp.17-20
• /
• 2011

Plant biomass is a huge carbon-complex that has potential as a nutrient. Therefore we extracted and separated useful materials for plant growth from tea leaf and stem. The pre-treatment process including high temperature ($200^{\circ}C$) and pressure (20-40 kgf/$cm^2$) was treated for several minutes and extracted at $120^{\circ}C$ for 30-60 minutes. After that the chemical compositions and ingredients were analyzed from that plant-nutrient. As a result of mineral contents, calcium and magnesium concentrations are higher than other minerals. Also the result of carbohydrates analyses has shown that the sugar oligomer consists of xylose(95.3%) and glucose(4.7%), and the sugar monomer consists in the order of xylose (52.7%) > manose (22.8%) > arabinose (10.8%) > galactose (10.2%) > glucose (3.5%). Before applied to field, in vitro plant growth system and formulation were examined. To evaluate the effect of the nutrients, both strawberry green-house and persimmon fields were used in this test. The treated persimmons were heavier than controls scored at 13-22%. In addition, the storage-period was extended in the treated strawberries. Interestingly in the treated strawberry, the contents of polyphenols were increased (38-57%). These results suggest that the plant-nutrient can afford to help for plant growth and storage, and it can be substituted for other commercial nutrients. In conclusion, this plant-nutrient may help to extend eco-friendly or organic farming in Hadong-gun area.