• Journal of the Korean Vacuum Society
• /
• v.21 no.6
• /
• pp.301-311
• /
• 2012

Discharge property of plasma jet devices is investigated for the application to the doping processes of crystalline solar cells and others. Current-voltage characteristics are shown as the typical normal-glow discharge in the various gas pressure of plasma jets, such as in the atmospheric plasma jets of Ar-discharge, in the ambient pressure of atmospheric discharge, and in the ambient Ar-pressure of Ar-discharge. The discharge voltage of atmospheric plasma jet is required as low as about 2.5 kV while the operation voltage of low pressure below 200 Torr is low as about 1 kV in the discharge of atmospheric and Ar plasma jets. With a single channel plasma jet, the irradiated plasma current on the doped silicon wafer is obtained high as the range of 10~50 mA. The temperature increasement of wafer is normally about $200^{\circ}C$. In the result of silicon wafers doped by phosphoric acid with irradiating the plasma jets, the doping profiles of phosphorus atoms shows the possibility of plasma jet doping on solar cells.

• Journal of the Korean Institute of Gas
• /
• v.2 no.3
• /
• pp.37-48
• /
• 1998

A cryogenic liquid stored in the closed cryogenic tank has been studied at various liquid levels. The change of pressure, temperature, and liquid-vapor ratio in the tank depended on the liquid levels. The various phenomena were shown at different liquid levels as follows: (1) liquid level was increased with condensation of vapor: (2) liquid was vaporized in spite of liquid level going up for a certain initial period and then condensation of vapor occurred at higher pressure; (3) liquid was vaporized without liquid level change; (4) liquid was vaporized with liquid level decreasing. If the tank is full with cryogenic liquid, it is extremely dangerous because of soaring the pressure. Therefore the tank must be filled with $90\%$ liquid according to the safety rules. If the tank was filled with $0\%$ ullage, the pressure increment as high as 80bar during first 5 days. With $90\%$ liquid level, however, the pressure was increased as low as 1.5bar in the same period. No matter what the liquid level is, it is very dangerous if the tank is locked-up with filled cryogenic liquid for a long time.

• 한국연소학회:학술대회논문집
• /
• 2003.05a
• /
• pp.241-246
• /
• 2003

Numerical simulations are performed at atmospheric pressure in order to understand the effect of additives on flame speed and the NOx formation in freely propagating $H_{2}/O_{2}/N_{2}$ flames with oxygen enrichments. A chemical kinetic mechanism is developed, which involves 26 gas-phase species and 99 reactions. Under several equivalence ratios and oxygen enrichments, flame speeds are calculated and compared with those obtained from the experiments, the results of which is in good agreement. As hydrogen chloride as additive is added into $H_{2}/O_{2}/N_{2}$ flames with low oxygen enrichments, its chemical effect causes the decrease of flame speed, radical concentration, and the NO production rate. It is found that the chemical effect of additive has much more influence on the reduction of EINO than its physical effect. However, in flames with very high flame temperature the physical effect rather than the chemical effect becomes more important on the reduction of EINO.

• Journal of Hydrogen and New Energy
• /
• v.16 no.1
• /
• pp.1-8
• /
• 2005

Transition of momentum-controlling hydrogen jet to buoyant jet is experimentally investigated in order to develop a prediction model for the moving trajectory of hydrogen leaked from hydrogen devices. In the experiments, room-temperature helium, that has a similar density to the hydrogen leaked from high pressure tank, is horizontally injected through a 4mm tube and its moving trajectory is visualized by the shadowgraph method. The moving trajectories are found to be parabolic, thereby exhibiting increasing influence of the buoyancy. In analyzing the experimental results, the vertical movement is assumed to be controlled by the buoyancy while the horizontal movement is controlled by the air entrainment caused by the initial momentum. The resealing based on this assumption yields a single curve fitting to the all experimental results.

• Journal of Welding and Joining
• /
• v.26 no.1
• /
• pp.50-55
• /
• 2008

A low alloy-steel(2.25Cr-1.0Mo) has been widely used for boiler piping, header and tubes in high temperature and pressure conditions of the thermal power plant. It is common knowledge that the repair welding is permitted two or three times by customary practice rule, but there is no regulation to limit the number of repair welding base on the study heat-affected zone(HAZ), which is the weakest zone when repair welding is under taken, by experiments about the metallographic degradation and mechanical properties. Therefore, this study aims to verify the reliability of 5 times repair welding through conducting the experimental observation in the mechanical and the metallographic change on HAZ varying repair welding times. In results of the experiments, it is concluded that the reliability was kept in HAZ even up to the fifth repairs.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.3
• /
• pp.1-7
• /
• 2013

The purpose of this study was the implementation of a simulation for a subsea production system. This subsea production system is installed under environments with high pressure and low temperature. Most of the processes for oil and gas production occur in the subsea equipment. Therefore, an understanding and study of subsea production systems is very difficult because people cannot directly observe the processes occurring in the subsea production system. A simulation system can be a useful solution for this difficult problem. In this research, information models and a 3-D graphic model of the subsea equipment were built using the object-oriented technology and 3-D CAD. The entire system was implemented with the help of simulation software, 3-DVIA Virtools. The simulation system for the subsea production system was tested using several production process scenarios. The results of the tests showed that the simulation system is very useful for understanding a subsea production system and could be a good educational tool.

• Journal of ILASS-Korea
• /
• v.17 no.4
• /
• pp.205-209
• /
• 2012

This study focused on comparing macroscopic characteristics of DME and diesel fuel experimentally. DME fuel is one of the most promising alternative fuels because of its superiority in atomization characteristic and clearness in terms of exhaust gas compared with existing fossil fuels. In addition, DME fuel has high cetane number so it could be applied to compression ignition engine. However because DME fuel exists in gas phase at room temperature and atmospheric pressure, and it corrodes rubber parts of fuel line, DME fuel is hard to apply to commercial vehicles. To establish knowledge about DME fuel and furthermore, to develop commercial DME vehicles such as passenger cars, many research have been proceeded steadily. The present study, by comparing spray characteristics of DME fuel to those of diesel fuel, improved atomization characteristics in DME were revealed. Injection quantity measurement and spray visualization experiment were progressed and it was revealed that DME fuel shows small injection quantity than that of diesel fuel and axial development of spray in terms of spray tip penetration decreases when DME fuel was injected.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.72.1-72.1
• /
• 2010

Thin film a-Si solar cells deposited by PECVD have many advantages compared to the traditional crystalline Si solar cells. They do not require expensive Si wafer, the process temperature is relatively low, possibility of scaling up for mass production, etc. In order to produce thin film solar cells, understanding the relationship between the material characteristics and deposition conditions is important. It has been reported by many groups that the band gap of the a-Si material and the deposition rate has an linear relationship, when RF power is used to control both. However, when the process pressure is changed in order to control the deposition rate and the band gap, a diversion from the well known linear relationship occurs. Here, we explain this diversion by the deposition condition crossing different plasma regions in the Paschen curve with a simple model. This model will become a guide to which condition a-Si thin films must be fabricated in order to get a high quality film.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.107.2-107.2
• /
• 2010

고온건식탈황기술은 고온고압에서 석탄가스에 함유된 황화합물을 제거하는 기술로 석탄가스화에 의해 생성된 고온의 석탄가스의 열손실을 최소화하여 열효율이 높은 기술이다. 본 연구에서는 석탄으로부터 합성원유를 생산하는 0.3 배럴/일 규모 석탄액화(CTL)공정의 연계운전을 통하여 건식탈황공정의 성능을 평가하였다. 0.3 배럴/일 규모 석탄액화공정은 석탄가스화기, 건식탈황공정, 액화공정으로 구성되어 있으며 30 atm의 고압에서 운전된다. 건식탈황공정은 석탄가스화기와 액화공정 사이에 위치하여 석탄가스화로부터 생성된 석탄가스에 함유된 황화합물을 아연계 건식탈황제에 의해 제거한 후 액화반응기로 공급하여 황화합물에 의한 촉매의 피독을 막아주는 역할을 수행한다. 본 연구에서는 기존에 개발된 두 개의 기포유동층 반응기로 구성된 탈황장치를 30 atm에서 운전이 가능하도록 수정/보완하여 실제 운전압력인 30 atm의 고압에서 연속운전을 수행하였다. 실험 결과 탈황효율은 99% 이상이며 탈황반응기 출구 황화합물의 농도는 1 ppmv 이하로 유지하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.132.2-132.2
• /
• 2010

기후변화협약 등으로 인하여 기존 화력발전기술보다 효율이 높고 온실가스 발생을 줄일 수 있는 고효율 청정석탄 이용기술에 대한 사회적 요구가 높아짐에 따라 석탄 가스화와 관련된 기술 개발이 확대되고 있다. 석탄을 가스화하면 CO와 $H_2$가 주성분으로 구성된 합성가스를 얻을 수 있는데, 이를 청정가스연료로 사용하기 위해서는 합성가스에 포함된 분진의 제거가 필수적이다. 대부분의 석탄가스화 공정에서는 캔들형 필터를 사용한 여과식 집진시스템을 적용하여 합성가스에 포함된 분진을 제거하고 있다. 본 연구에서도 Pilot급 석탄 가스화기에서 제조된 합성가스에 포함된 분진 제거를 위하여 고온/고압 집진시스템을 구축하였으며, 다양한 운전조건과 필터 종류에 따른 집진시스템의 운전특성 파악을 수행하였다. 연구결과 석탄 합성가스를 안정적으로 정제 하기위한 집진시스템의 중요한 운전 기준과 방법을 도출할 수 있었으며, 이렇게 도출된 운전 기준과 방법은 용량이 증대된 집진시스템의 연속운전을 진행하여 향후 실증할 예정이다.