• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.10
• /
• pp.649-657
• /
• 2017

A rupture in a high-pressure pipe causes the fluid in the pipe to be discharged in the atmosphere at a high speed resulting in a supersonic jet that generates the compressible flow. This supersonic jet may display complicated and unsteady behavior in general. In this study, Computational Fluid Dynamics (CFD) analysis was performed to investigate the compressible flow generated by a supersonic jet ejected from a high-pressure pipe. A Shear Stress Transport (SST) turbulence model was selected to analyze the unsteady nature of the flow, which depends upon the various gases as well as the diameter of the pipe. In the CFD analysis, the basic boundary conditions were assumed to be as follows: pipe of diameter 10 cm, jet pressure ratio of 5, and an inlet gas temperature of 300 K. During the analysis, the behavior of the shockwave generated by a supersonic jet was observed and it was found that the blast wave was generated indirectly. The pressure wave characteristics of hydrogen gas, which possesses the smallest molecular mass, showed the shortest distance to the safety zone. There were no significant difference observed for nitrogen gas, air, and oxygen gas, which have similar molecular mass. In addition, an increase in the diameter of the pipe resulted in the ejected impact caused by the increased flow rate to become larger and the zone of jet influence to extend further.

• Journal of Korean Society of Forest Science
• /
• v.99 no.1
• /
• pp.16-23
• /
• 2010

Experiments were performed for investigate the immune activities on human B and T cell growth and secretion of their cytokines. Also, antibodies in serum were investigated in female ICR mouse by feeding the extracts of Acer mono at dose of 30 and 100 mg/mL of one day orally for 15 days. The cytotoxicity of the samples on normal human cell (HEL299) was below 24.15% in adding the all extracts. Both human immune B and T cells were increased up to about 40% by the high pressure extraction process. The secretion of cytokines (IL-6, TNF-${\alpha}$) on human B and T cells were increased up to 20-50% by adding the high pressure extraction process compare to the hot water extraction process. Also, total serum IgG levels increased by feeding Acer mono extacts. It can be conclude that optimum condition for efficient extraction of Acer mono as functional materials is solvent extraction process using water with high pressure at below $100^{\circ}CA$ than typical process.

• Atmosphere
• /
• v.26 no.1
• /
• pp.127-140
• /
• 2016

In this study, the correlations between AST850 and precipitation, and those between WDT and precipitation in the Yeongdong coastal region under the direct/indirect influence of the expansion of cP (continental polar air mass) high were quantitatively analyzed based on the winter season data for the last 20 years, according to surface pressure patterns such as Type 1 (cP high expansion type), Type 2 (cP high expansion + trough type), Type 4 (South trough type), and Type 5 (East Sea trough type). Here, AST850 represents 'sea surface temperature minus temperature on 850 hPa level' and WDT represents 'a speed of 1000 hPa wind projected onto a certain wind direction times precipitation duration in hour'. First, the correlation coefficients between AST850 and precipitation in Type 1, Type 2, and Type 5 cases were 0.253, 0.384, and 0.398 respectively, indicating that a tendency of increasing precipitation linearly with the value of AST850 is slightly presented. In the case of Type 4, however, the coefficient was -0.15, representing almost no linear correlation between AST850 and precipitation. In the correlation between WDT and precipitation, there was the largest correlation coefficient (0.464) between WDT along a direction of $90^{\circ}$ and at EN1 in Type 1 cases. In the case of Type 2, there was the largest correlation coefficient (0.767) between WDT along a direction of $67.5^{\circ}$ and at ES1. In the case of Type 4, there was the largest correlation coefficient (0.559) between WDT along a direction of $22.5^{\circ}$ and at EN2. Finally, in the case of Type 5, there was the largest correlation coefficient (0.945) between WDT along a direction of $315^{\circ}$ and at SE1, representing the largest coefficient among the types. It was found that surface wind directions with the highest correlations to precipitation in the Yeongdong coastal area on winter season were varied according to surface pressure patterns, and that the correlations between WDT and precipitation were higher than those between AST850 and precipitation.

• Journal of Adhesion and Interface
• /
• v.22 no.2
• /
• pp.31-38
• /
• 2021

In this study, a nonionic reactive emulsifier with aromatic and acryl group was synthesized by using polyoxyethylene(10) dodecylphenyl ether with 3-butenoic acid. The synthesized nonionic reactive emulsifier was confirmed by ¹H-NMR and FT-IR. In addition, the reactive emulsifier synthesized in the preparation of aqueous acrylic adhesives base emulsion was used and the properties of the solid content, conversion, particle size distribution, peel strength and high temperature holding force were compared to those of nonionic emulsifiers without aromatic group. The particle size was distributed from 370 nm to 698 nm, and the peel strength were measured in the range of 1.507~1.802 kg_f. The high temperature holding force of prepared adhesives base emulsion were measured in the range of 0.50~2.00 mm. Especially, in the result of synthesized nonionic reactive emulsifier with aromatic group, it was confirmed that high temperature holding force results were the most excellent than the case of using other nonionic reactive emulsifiers, and it can be useful for water-based acryl pressure sensitive adhesive.

• Food Engineering Progress
• /
• v.13 no.2
• /
• pp.85-91
• /
• 2009

High hydrostatic pressure and enzymatic hydrolysis (HPEH) was applied to anchovy in order to produce a natural seasoning ingredient. Total soluble solid, amino nitrogen, total nitrogen and the degree of hydrolysis of anchovy hydrolysates were investigated depending on the process parameters such as temperature, pressure, enzyme concentration and enzyme type. The optimal condition for anchovy hydrolysis was confirmed as temperature 50$^{\circ}C$, reaction time 24 hrs, pressure 50 MPa and enzyme concentration 0.6% in HPEH treatment. HPEH treatment showed more effective in overall properties of anchovy hydrolysis than those of control. All anchovy hydrolysates produced by HPEH treatment were increased more 1.5-2.6 times of total free amino acid than that of control. From these results, the HPEH treatment appears to be an effective and economic process to produce a natural seasoning ingredients.

• Atmosphere
• /
• v.23 no.2
• /
• pp.161-169
• /
• 2013

We examine the effects of the sea surface temperature (SST) distribution on heavy snowfall over the Yellow Sea using high-resolution SST products and WRF (Weather Research and Forecasting) model simulations in 30 December 2010. First, we evaluate the model by comparing the simulated and observed fresh snowfall over the Korean peninsula (Ho-Nam province). The comparison shows that the model reproduces the distributions and magnitudes of the observed snowfall. We then conduct sensitivity model simulations where SST perturbations by ${\pm}1.1^{\circ}C$ relative to baseline SST values (averaged SST for $5{\sim}15^{\circ}C$) are uniformly specified over the region of interest. Results show that ${\pm}1.1^{\circ}C$ SST perturbation simulations result in changes of air temperature by $+0.37/-0.38^{\circ}C$, and by ${\pm}0.31^{\circ}C$ hPa for sea level pressure, respectively, relative to the baseline simulation. Atmospheric responses to SST perturbations are found to be relatively linear. The changes in SST appear to perturb precipitation variability accounting for 10% of snow and graupel, and 18% of snowfall over the Yellow Sea and Ho- Nam province, respectively. We find that anomalies of air temperature, pressure, and hydrometeors due to SST perturbation propagate to the upper part of cloud top up to 500 hPa and show symmetric responses with respect to SST changes.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2221-2225
• /
• 2003

As a result of using a heat generator to experiment the physiological influence of the human body due to the warming effect of far-infrared radiation (FIR), the blood pressure of the subjects lowered and stabilized due the expansion of capillary vessels and salt discharge during perspiration as the temperature of the generator elevated($30{\sim}65^{\circ}C$). In case of heart rate, it decreased and stabilized when the temperature of the ‘far-infrared radiation heat generator’ was at a low temperature below $40^{\circ}C$. At a high temperature above $44^{\circ}C$, there was a slow elevation in the heart rate. However, the elevation of the heart rate is not a sudden elevation, therefore, does not give much stress to the heart.

• Tribology and Lubricants
• /
• v.25 no.6
• /
• pp.421-426
• /
• 2009

The brake system is important part of automobile safety system. The disc brake system is divided two parts: the rotating axisymmetrical disc and the stationary pads. During braking, the kinetic energy and potential energy of moving vehicle were converted into the thermal energy through frictional heat between the brake disc and the pads. The frictional heat, which is generated on the interface of the disc and pads, can cause high temperature during the braking process. The object of present work is to determine temperature and thermal stress, to compare to simulation results and experimental results in the disc by partial 3D model of ventilated disc brake with appropriate boundary conditions. In the simulation process, the mechanical loads were applied to the thermo-mechanical coupling analysis in order to simulate the process of heat produced by friction.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.6
• /
• pp.702-708
• /
• 2006

This study shows the experimental characteristics of the double pipe inserted liquid pipe with small diameter in the gas pipe with large diameter for circulating of a liquid of high temperature, pressure and a gas of low temperature, pressure at the same time. So the functions of pipe and pipe's expansion and heat transfer are presented simultaneously. In the result, the temperature of gas refrigerant at the inlet of compressor increased about $5^{\circ}C$ by the heat transfer with liquid refrigerant in case of the double pipe. And liquid gas refrigerant which the temperature at the inlet of evaporator decreased about $3^{\circ}C$ comparing with the existing type flows into an evaporator COP of the double pipe increased about $7{\sim}10%$ comparing with that of the conventional pipe. And the noise of the double pipe at capillary tube is less than that of the conventional type about 3dB. Consequently. it is convinced the superiority of the double pipe in the heat loss and soundproofing aspect.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.5
• /
• pp.526-534
• /
• 2004

A new second-moment closure model for turbulent heat fluxes is proposed on the basis of the elliptic equation. The new model satisfies the near-wall balance between viscous diffusion, viscous dissipation and temperature-pressure gradient correlation, and also has the characteristics of approaching its respective conventional high Reynolds number model far away from the wall. The predictions of turbulent heat transfer in a channel flow have been carried out with constant wall heat flux and constant wall temperature difference boundary conditions respectively. The velocity field variables are supplied from the DNS data and the differential equations only fur the mean temperature and the scalar flux are solved by the present calculations. The present model is tested by direct comparisons with the DNS to validate the performance of the model predictions. The prediction results show that the behavior of the turbulent heat fluxes in the whole region is well captured by the present model.