• Nuclear Engineering and Technology
• /
• 제52권7호
• /
• pp.1571-1578
• /
• 2020

As a critical material in very/high-temperature gas-cooled reactors, graphite material directly affects the safety of the reactor core structures. Owing to the complex structures of graphite material in reactors, the material typically undergoes complex stress states. It is, therefore, necessary to study its mechanical properties, failure modes, and strength criteria under complex stress states so as to provide guidance for the core structure design. In this study, compressive failure tests were performed for graphite material under the condition of different confining pressures, and the effects of confining pressure on the triaxial compressive strength and Young's modulus of graphite material were studied. More specifically, graphite material based on the fracture surfaces and fracture angles, the graphite specimens were found to exhibit four types of failure modes, i.e., tension failure, shear-tension failure, tension-shear failure and shear failure, with increasing confining pressure. In addition, the Mohr strength envelope of the graphite material was obtained, and different strength criteria were compared. It showed that the parabolic Mohr-Coulomb criterion is more suitable for the strength evaluation for the graphite material.

• 한국안전학회지
• /
• 제24권3호
• /
• pp.54-58
• /
• 2009

화석연료의 고갈과 환경문제로 인해 대체에너지 개발의 필요성이 대두되고 있다. 이에 거론되고 있는 대체에너지 중에서 물로부터 수소를 생산하는 기술은 탄소발생이 없는 매우 장래가 유망한 기술이다. IS 열화학적 물분해 공정은 거론되는 방법 중 매우 유망한 기술로 에너지원으로 900$^{\circ}C$ 이상의 열을 공급할 수 있는 고온가스냉각로(HTGR)를 시용하여 매우 능률적으로 수소를 생산할 수 있는 방법이다. 본 연구에서는 IS공정 의 초기사건을 도출하기 위해 주논리도(MLD)방법이 사용되어 화학물질의 유출을 야기할 수 있는 초기사건 9가지가 도출되었다. 또한 도출된 9가지 초기사건 중 6가지를 선정, 사건수목을 이용하여 정량화하였다.

• 공업화학
• /
• 제16권6호
• /
• pp.848-852
• /
• 2005

Iodine-sulfur 사이클의 연속 공정 운전을 위해서는 분젠반응에서 생성되어진 황산과 요오드화수소의 분리와 일정한 조성을 유지시키는 기술이 필요하다. 그러나 황산과 요오드화수소는 황과 황화수소를 생성시키는 부반응이 일어나므로 부반응을 억제하며 두 개의 산을 분리시키는 기술이 요구된다. 따라서 본 연구는 부반응이 최소화되는 조건에서 2 액상 분리에 관한 물의 영향에 관하여 조사하였다. 물 몰분율이 0.86에서 0.91까지 범위에서 2 액상 분리가 일어나고 물의 증가에 따라 황화수소의 생성이 억제되었으나 물아 몰분율이 0.92 이상에서 2 액상 분리 현상은 관찰되지 않았다.

• Nuclear Engineering and Technology
• /
• 제47권5호
• /
• pp.608-616
• /
• 2015

The migration of silver (Ag) in silicon carbide (SiC) and $^{110m}Ag$ through SiC of irradiated tristructural isotropic (TRISO) fuel has been studied for the past three to four decades. However, there is no satisfactory explanation for the transport mechanism of Ag in SiC. In this work, the diffusion coefficients of Ag measured and/or estimated in previous studies were reviewed, and then pre-exponential factors and activation energies from the previous experiments were evaluated using Arrhenius equation. The activation energy is $247.4kJ{\cdot}mol^{-1}$ from Ag paste experiments between two SiC layers produced using fluidized-bed chemical vapor deposition (FBCVD), $125.3kJ{\cdot}mol^{-1}$ from integral release experiments (annealing of irradiated TRISO fuel), $121.8kJ{\cdot}mol^{-1}$ from fractional Ag release during irradiation of TRISO fuel in high flux reactor (HFR), and $274.8kJ{\cdot}mol^{-1}$ from Ag ion implantation experiments, respectively. The activation energy from ion implantation experiments is greater than that from Ag paste, fractional release and integral release, and the activation energy from Ag paste experiments is approximately two times greater than that from integral release experiments and fractional Ag release during the irradiation of TRISO fuel in HFR. The pre-exponential factors are also very different depending on the experimental methods and estimation. From a comparison of the pre-exponential factors and activation energies, it can be analogized that the diffusion mechanism of Ag using ion implantation experiment is different from other experiments, such as a Ag paste experiment, integral release experiments, and heating experiments after irradiating TRISO fuel in HFR. However, the results of this work do not support the long held assumption that Ag release from FBCVD-SiC, used for the coating layer in TRISO fuel, is dominated by grain boundary diffusion. In order to understand in detail the transport mechanism of Ag through the coating layer, FBCVD-SiC in TRISO fuel, a microstructural change caused by neutron irradiation during operation has to be fully considered.