• The KIPS Transactions:PartA
• /
• v.10A no.6
• /
• pp.635-642
• /
• 2003

The radical development of recent network technology provides the basic foundation which can establish a high speed and cheap cluster system. It is a general trend that conventional cluster systems are built as the system over a fixed level based on stabilized and high speed local networks. A multi-distributed web cluster group is a web cluster model which can obtain high performance, high efficiency and high availability through mutual cooperative works between effective job division and system nodes through parallel performance of a given work and shared memory of SC-Server with low price and low speed system nodes on networks. For this, multi-distributed web cluster group builds a sub-cluster group bound with single imaginary networks of multiple system nodes and uses the web distributed shared memory of system nodes for the effective data transmission within sub-cluster groups. Since the presented model uses a load balancing and parallel computing method of large-scale work required from users, it can maximize the processing efficiency.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.3
• /
• pp.1-10
• /
• 2014

Offset paper printing is a promising roll-to-roll technique for color printed materials. Although it is no doubt that understanding ink transfer mechanism in offset printing process is necessary to achieve high printing quality, investing the relationship between inks and substrates at the nip is difficult experimentally due to high printing speed. In this paper, rheological behavior and splitting point of the ink at the nip is studied using package software Ployflow and Flow 3D based on Navier-Stokes equation. Polydimethylsiloxane (PDMS) ink and IGT printability tester were used for an model ink and experiment to compare with that of simulation data, respectively. As a result, higher viscosity at state flow and pressure increased ink transfer due to higher possibility of presence of cavitation at the nip and increase in covering area ratio. These results have shown good agreements with experimental data compared by measuring density of print through.

• KNOM Review
• /
• v.22 no.2
• /
• pp.12-21
• /
• 2019

There is a rapid development of experimental equipment and ICT technology in data-intensive scientific areas, thus, big data of more than exabyte size is being generated. However, the big data transmission technology does not satisfy the needs of the application researchers who utilize it. Various high-performance transmission technologies have been developed based on QoS(Quality of Service), but they also require changes in the clean slate method. On the other hand, ScienceDMZ technologies improve the performance of scientific big data transmission by bypassing the firewall that causes a big problem in transmission performance. In addition, it is possible to implement without changing the existing network. In this paper, we built ScienceDMZ in an international long-distance environment based on KREONET(Korea Research Environment Open NETwork), and we verified the performance. We also introduced how GPU platform could be linked in a distributed ScienceDMZ environment.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.11a
• /
• pp.42-46
• /
• 2006

As the next generation internet (NGI) is supporting High-speed in Gbps rate with the appearance of advanced network technologies, various applications that require high data rates. have been experimented and operated. By using high speed application services, many kinds of problems can be generated but we cannot easily grasp their reasons. However, if the user monitors the end-to-end one's flow data information (path and data rate in each router, state of each router) he can find them more accurately Until now, we have found out the fact that systems which can network-widely monitor end-to-end flow have not be developed yet, only simple systems which can monitor user's individual flow data at just one node are developed In this study, we suggest and materialize a system which can analyze bandwidth in real time by searching routing paths and measuring packet transfer rate between end-to-end flow data and supported flow traffic of using IPv6.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.9
• /
• pp.1237-1244
• /
• 2001

An experimental study was carried out to identify the various regimes of natural convective pool boiling and to determine the boiling heat transfer curve and Critical Heat Flux(CHF) on a vertical square surface having a 70mm width and a 70mm height. The heater made of copper block with embedded cartridge heaters is submerged in a water tank at atmospheric pressure. As the heat flux increases from 100kW/㎡ to 1.2MW/㎡, the heat transfer regime migrates from the nucleate boiling to the film boiling. The boiling heat transfer data are fitted by Rohsenow type correlation. An explosive vapor generation on the heated surface, whose size and frequency are characterized by the heat flux, is visualized using a high speed digital imaging system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.397-400
• /
• 2000

The demands of high data transfer rate and high recording density in optical disk memory device are being increased. In order to achieve high performance, lever actuator for optical disk is proposed. Firstly, the role of lever and structure are discussed and the flexure hinge is introduced to enhance the precise movement. Next is to present the magnetic circuit structure and concept design for the lever actuator. Finally, the dynamic modeling of the lever actuator is found and the analysis results are shown. Consequently, the lever actuator shows the possibility as a pickup actuator for the next generation optical disk.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.563-564
• /
• 2017

The core of the cloud computing technology is the data center in that the networking technology is important. Cloud data centers are comprised of tens or even hundreds of thousands of physical servers, so networking technology is required for high-speed data transfer. These networking technologies also require scalability, fault tolerance, and agility. For these requirements, many multi-path based schemes have been proposed. However, it was mainly used for load balancing of traffic and select a path randomly. In this paper, a scheme that can construct a multipath using software defined networking technology and transmit the traffic in parallel by using the multipath to achieve a fast transmission speed, solve the scalability problem and fault tolerance is proposed.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.4
• /
• pp.32-48
• /
• 2022

This study presented a spatial data serialization technique that can efficiently store and transmit large amounts of spatial data for precision road maps was designed and implemented. For efficient serialization, a binary spatial data structure is defined, and a coordinate value encoding technique without loss of information is designed using the Zigzag-Z-order curve. The spatial data serialization technique designed for precision road maps was tested, and the data size and encoding/decoding speed after encoding were compared with Protocol buffer and Geobuff. As a result, it was confirmed that the designed serialization method was excellent in data weight reduction performance and encoding speed. However, the decoding speed was inferior to other serialization techniques in linestring and polygon type spatial data. Through this study, it was confirmed that spatial data can be efficiently encoded, stored, and transmitted using binary serialization techniques.

• Journal of computational fluids engineering
• /
• v.14 no.2
• /
• pp.39-45
• /
• 2009

In engine room, proper enclosure system is preferable for reducing noise level but the enclosure system in the engine room causes bad influence on cooling performance due to poor ventilation. Cooling efficiency of the enclosure system can be improved by varying fan speed and proper flow path for ventilation. In this study, numerical analysis is performed to assess cooling effect of the enclosure system using finite volume method. The RNG k-$\varepsilon$ model is adopted for turbulence model along with heat exchanger model and porous media model for heat exchanger analysis, and moving reference frame model for rotational fan. Verification result shows reasonable agreement with experimental data. Analysis results show direct effect of velocity and temperature distribution on cooling ability in the enclosure system. Enclosure system of case B shows high heat transfer coefficient and has the smallest area ratio of opened flow passages which is good for noise level reduction.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.4
• /
• pp.576-582
• /
• 2015

The efficiencies of thermal power system using fossil fuel depend on heat exchangers which extract energy from the exhaust gas before it is expelled to the atmosphere. To increase heat transfer efficiency it is very important to maintain the surface of heat exchanger as clean condition. The accepted skill of cleaning of fouled surface of heat exchanger is soot blowing. A high pressure jet of air is forced through the flat surface of plate to remove the deposit of fouling. There is, however, little knowledge of the fundamental principles of how the jet behave on the surface and how the jet actually removes the deposit. Therefore, the study focuses on the measuring of cleaning area and cleaning dwell time after accumulating the simulated deposit on the flat surface. The deposit test rig was built for the study and simulated deposit material is used after measuring the physical property of the each material by shearing stress test. Much data was obtained for the analysis by the parameters change such as the different jet speed, different inner pressure and variable distance of the jet from the test rig surface. The experimental data was compared with the theoretical equation and most of the data matches well except some extreme cases.