• 보존과학회지
• /
• 제34권6호
• /
• pp.539-548
• /
• 2018

본 연구는 문화재 방사선 조사에서 고려하지 않았던 산란 방사선의 영향을 확인하기 위해 관전압 (kVp)과 필름-바닥 거리(film-floor-distance: FFD) 납스크린 배치를 달리하여 평가하였다. 연구결과, 실험시편의 투과농도와 산란 방사선의 투과 농도는 관전압에 따라 증가되었다. 실험시편의 투과농도는 평균 1.4 D의 편차를 보이며, 60 kVp에서 0.17 D, 160 kVp에서 1.54 D, 220 kVp에서 2.97 D로 확인되었다. 산란 방사선의 평균 투과농도는 60 kVp에서 0.10 D, 160 kVp에서 0.40 D, 220 kVp에서 0.46 D로 확인되었다. FFD 거리가 바닥면과 멀어질수록 관전압(60 kVp-160 kVp)구간의 경우 투과농도 (D)가 커지는 경향을 보였으나, 고전압(160 kVp-220 kVp)구간은 FFD 거리 증가에 따른 투과농도 변화가 확인되지 않았다. 납스크린 없는 조건과 바닥면(floor)을 납스크린으로 대체한 경우는 FFD 50 mm, 100 mm, 200 mm 거리에서 산란 방사선이 확인되었고, FFD 0 mm 거리는 확인되지 않았다. 식별률은 관전압 160 kVp에서 FFD에 따라 2.08~2.67% 범위이며, 관전압 220 kVp에서는 2.67~3.33% 범위로 측정되었다.

• Journal of Electrochemical Science and Technology
• /
• 제8권4호
• /
• pp.307-313
• /
• 2017

In this paper we report an electrochemical sensor based on ZnO-functionalized graphene oxide nanocomposite (ZnO-GO) for the sensitive determination of the cabergoline. Cabergoline electrochemical behaviors were investigated by cyclic voltammetry (CV), chronoamperometry (CHA) and differential pulse voltammetry (DPV). The modified electrode shows electrocatalytic activity toward cabergoline oxidation in phosphate buffer solution (PBS) (pH 7.0) with a reduction of the overpotential of about 180 mV and an increase in peak current. The DPV data showed that the obtained anodic peak currents were linearly dependent on the cabergoline concentrations in the range of $1.0-200.0{\mu}M$, with the detection limit of $0.45{\mu}M$. The prepared electrode was successfully applied for the determination of cabergoline in real samples.

• 한국산업보건학회지
• /
• 제19권3호
• /
• pp.270-279
• /
• 2009

In order to check a necessity of health control for the laborers who are in use of mixed organic solvents in the printing industries, this study evaluated the use status of mixed organic solvents, health subjective symptoms on the exposure of the solvents, health hazard for each kind of printings for the employees who work for the printing industries located in Seoul and Gyeonggi. The study analyzed 228 sites and 311 people responded of the total 250 sites surveyed from March to September 2007, and obtained the following results; 1) Estimating the exposure of the mixed organic solvents, the study found that estimation of mixture(EM) was different for each kind of printings at a level of significance, excessiveness of EM was 7.5%, the highest, for gravure printing, 5.6% for screen printing, 4.7% for master printing, 2.9% for offset printing. 2) As to the mean scores of health subjective symptoms for each kind of printings, workers in screen printing showed high scores in every subjective symptom, of which symptom of central nervous system was 3.75, the highest, and the difference was statistically at a level of significance(p<0.01). 3) Results of the hazard analysis for carcinogens and non-carcinogens contained in the mixed organic solvents exposed to the workers showed that cancer risk of offset printing workers was $7.8{\times}10^{-9}$ for benzene, the mean cancer risk was $2.02.{\times}10^{-8}$ from Monte-Carlo simulation, and both risks did not exceed the US EPA permissible standard of $1{\times}10^{-6}$. The total hazard indices of the non-carcinogens estimated was 3.523, the highest, for gravure printing, 2.381 for master printing, 1.125 for screen printing, respectively, and all exceeded 1.

• 대한조선학회논문집
• /
• 제53권4호
• /
• pp.300-306
• /
• 2016

The gas ventilated by supercavitation splits into smaller bubbles and follows the water passage of the cavitation tunnel. The bubbles quickly return to the test section by rather high speed flow, and interrupt the observation of the supercavitation. To secure clear observation in the test section, the bubble collecting section(settling chamber) of large volume is prepared to collect bubbles in the water passage ahead of the test section. The bubble collecting section should provide enough buoyancy effect to the bubbles for proper bubble collecting. However, rather high-speed oncoming flow produces non-uniform velocity distribution and deteriorates buoyancy effect in the bubble collecting section. In the present study, the bubble collecting space and three porous plates are designed and analyzed through numerical methods, and the bubble collecting function is experimentally validated by 1/10-scaled model in terms of the formation of uniformly low velocity distribution in the bubble collecting section.

• 임상간호연구
• /
• 제26권2호
• /
• pp.265-273
• /
• 2020

Purpose: The purpose of this study was to test the predictive validity of the Fall Assessment Scale-Korean version (FAS-K) and to find the most appropriate cutoff score to screen high-risk fall groups in adult patients in general hospitals in Korea. Methods: We performed a prospective evaluation study in medical and surgical ward patients at two major general hospitals in Seoul. Data were collected from Nov. 1, 2018 to Feb. 28, 2019, nurses performed 651 observation series. The researcher measured the fall risk assessment score by applying FAS-K, MFS (Morse Fall Scale), and JHFRAT (Johns Hopkins Hospital Fall Risk Assessment tool) to the patients twice a week between 10 am and 12 noon. Data were analyzed using Pearson's corelation coefficients, and the sensitivity, specificity, predictive value, and the area under the curve (AUC) of the three tools. Results: The FAS-K was positively correlated with the MFS (r=.70, p<.001) and the JHFRAT (r=.82, p<.001). According to the receiver operating characteristics (ROC) curve analysis of the FAS-K, sensitivity, specificity, and positive and negative prediction values were 85.3%, 49.4%, 8.5%, and 98.4%, respectively, when the FAS-K score was 4. Therefore, the cut-off score of the FAS-K to identify groups with high fall risk was 4. Conclusion: The FAS-K is a valid tool for measuring fall risk in adult inpatients. In addition, the FAS-K score, 4, can be used to identify high-risk fall groups and know specific points in time to provide active interventions to prevent falls.

• 한국컴퓨터정보학회논문지
• /
• 제21권12호
• /
• pp.139-145
• /
• 2016

In this paper, we propose to evaluate the effect of Resistin-like molecule alpha (Retnla) on the expression of transporters involved in modulating concentrations of peripheral cholesterol and plasma high-density lipoprotein (HDL) cholesterol. High levels of blood cholesterol are a well-recognized risk factor for atherosclerosis and are eliminated via the process of reverse cholesterol transport (RCT). We recently showed that Retnla ameliorates hypercholesterolemia and atherosclerosis by increasing biliary cholesterol secretion, the final step of the process, in low-density lipoprotein receptor-deficient mice. However, the role of Retnla in HDL-mediated cholesterol efflux, initial step of RCT pathway, is not yet clear. To identify cholesterol transport genes regulated by Retnla, we performed an extensive microarray-based gene expression screen using livers from Retnla-overexpressing (Tg) mice and control animals. The most significant change in Retnla-Tg mice was an upregulation of ATP-binding cassette sub-family G member 4 (Abcg4) transport and was validated using quantitative RT-PCR. The validated gene was also induced by treatment of purified Retnla protein in RAW 264.7 cells incubated with acetylated low-density lipoprotein and Hepa1c1c7 cells. Taken together, these results indicates that Retnla might also accelerate initial step of RCT pathway, suggesting therapeutic value of Retnla in the treatment of hypercholesterolemia and atherosclerosis.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.220-225
• /
• 2008

Cylindrical stainless-steel/sodium heat pipe for a high-temperature solar thermal application was manufactured and tested for transient and steady-state operations. Two layers of stainless-steel screen mesh wick was inserted as a capillary structure. The outer diameter of the heat pipe was 12.7 mm and the total length was 250 mm. The effective heat transport length, the thermal load, and the operating temperature were varied as thermal transport conditions of the heat pipe. The thermal load was supplied by an electric furnace up to 1kW and the cooling was performed by forced convection of air The effective thermal conductivity and the thermal resistance were investigated as a function of heat flux, heat transport length, and vapor temperature. Typical range of the total effective thermal conductivity was as low as 43,500 W/m K for heat flux of 176.4 kW/$m^2$ and of operating temperature of 1000 K.

• 한국식생활문화학회지
• /
• 제32권6호
• /
• pp.566-575
• /
• 2017

This study was conducted to screen for superior strains for preparation of Cheonggukjang and identify the optimal fermentation time based on fermentation of lentils by various Bacillus subtilis strains. Bacillus count was significantly high at 48 hrs of fermentation (9.22-9.51 log CFU/g). In addition, the pH was significantly high in the range of 7.60-7.92 at 48 hrs fermentation, and the reducing sugar content was significantly high (0.89-1.45). The amino-type nitrogen content and ammonia-type nitrogen content were significantly increased with fermentation time. Additionally, the amylase activity was significantly high (3.05-4.22) at 48 hrs of fermentation, as was the protease activity (4.80-5.63). Bacillus subtilis S3 (5.63), S4 (5.60) were higher than S1 (4.80), S2 (4.92). The viscous substances and DPPH radical scavenging activity increased at 48 hrs, then decreased. Sensory evaluation revealed that lentil Cheonggukjang fermented by S3 showed the highest scores in color, smell, savory taste, sweet taste, viscous substance and overall acceptability. Therefore, 48 hrs of fermentation should be suitable for lentil Cheonggukjang fermented by Bacillus subtilis S3.

• International journal of advanced smart convergence
• /
• 제6권4호
• /
• pp.80-87
• /
• 2017

Mixed Reality (MR) shows a composite image of a virtual object in the real world. It has been applied to various fields by the introduction of head mounted display (HMD) such as Microsoft's Hololens [1-3]. The virtual studio in broadcasting combines the contents created by computer graphics with the actual set to reproduce the 3D image screen. This requires physical space such as a set of chroma keys. It also requires professional knowledge and manpower and costly equipment to post-process the graphics and information for long periods of time. Therefore, in this paper, we aim to study the implementation of virtual studio based on Mixed Reality using Microsoft Hololens. Through the implementation of 'Holo-studio' application, realistic and virtual objects of broadcasting camera viewpoint were acquired at the same time. Using Microsoft's spectator view library, the frame rate is degraded in objects with high polygons (100,000 polygons). The proposed method maintains 60 fps image transmission in high polygon objects. The results of this paper show the possibility of using virtual studio at low cost which does not need separate physical space.

• 한국산학기술학회논문지
• /
• 제19권2호
• /
• pp.653-659
• /
• 2018

초고층 복합시설은 수많은 사람들이 이용하고 있는 도심의 핵심시설로서 안전성을 최우선으로 하고 있으며, 화재발생 시 연기와 유독가스는 대형사고를 유발할 수 있다. 본 연구는 초고층 복합시설물에서 화재에 의한 재난이 발생했을 경우, 피난자들이 신속히 안전한 곳으로 피할 수 있는 비상 대피통로용 접이장치에 적용되는 섬유 스크린 소재를 개발하는 데 목적이 있다. 섬유 스크린 소재 개발 방향은 일반적으로 사용되는 철제 소재와 달리 접이장치 내 롤형태로 장기간 보관 시 하중 부담이 적은 경량일 것과 차염/차연 기능이 우수해야 하며 복사열에 의한 피난자의 영향이 적어야 할 것이다. 이에 대해 난연성이 우수한 원단과 후가공을 조건으로 3종의 섬유 스크린 소재를 선정하여 열수축시험, 접촉열시험, 연소성시험, 난연도시험, 인장강도시험, 인열강도시험을 통해 성능평가를 수행하였다. 그 결과 경량의 원단이라도 후가공을 통해 우수한 성능을 발휘할 수 있으며, 실리콘수지 코팅이 섬유 스크린 소재 성능과 복사열에 의한 대피자의 안전을 확보할 수 있는 것으로 나타났다. 이에 따라 무게와 두께가 상이한 유리섬유 2종과 난연 실리콘수지 4종을 대상으로 코팅을 한 후 연소성시험을 수행하여 최적의 후가공조건을 평가하였다.