• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.61-62
• /
• 2018

On this Study, it conducts the Standards investigation about air leakage of Buildings for performance improvement of Smoke control in Fire. In domestic standards, it is incomplete the Criteria standards of air leakage. Therefore it is considered that won't limit the smoke spread due to stack effect. But in the case of the United States, it conducts the Hot smoke air-Leakage test and it consider that can prevent the Smoke Spread in Compartment.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.10a
• /
• pp.325-332
• /
• 2003

The tube structures act like cantilevered box beams and effectively resist lateral loads. In result, they are adopted as a high-rise buildings system. However, the shear lag in tube system prevents the idealized tube behavior such as a cantilevered box beam. Therefore, the studies on shear lag phenomena are necessarily requested. The presented papers are almost studied on framed tube structures and tube in tube structures. However, the study on the shear lag in the tube structure with core wall is lack. Thus, in this paper, the shear lag of the structure is studied. The shear lag coefficient is defined to investigate shear lag phenomena. However, existing shear lag coefficients are not adequate for understanding them. Therefore, on this study, new shear lag coefficient is suggested. In addition, the shear lag in the tube structure with core wall is analyzed by changing the five structural parameters of stiffness factor in frame, stiffness factor in wall, stiffness ratio, the number of stories and the number of bays.

• International Journal of High-Rise Buildings
• /
• v.3 no.4
• /
• pp.305-310
• /
• 2014

Wind-induced responses of a structure are often evaluated through dynamic analysis, where measured wind forces obtained from a wind-tunnel test and dynamic properties obtained from a FE (Finite Element) model are utilized. However, the FE model generally shows considerable discrepancies in the estimation of natural frequencies compared to field measurements due to some assumptions and simplifications. In this paper, a calibration method that can improve the estimation of natural frequencies in the FE model is proposed, and specific cases are studied for its validity with comparison to the field measurement results.

• International Journal of High-Rise Buildings
• /
• v.3 no.4
• /
• pp.279-283
• /
• 2014

This paper introduces two platforms created by the development team at CORE studio, Thornton Tomasetti's global innovation studio. Collaborative platforms change the way that parties communicate and develop projects. Wikipedia is one of many great examples for a platform that supports collaborative development of a product - the world's largest encyclopedia. In the AEC industry, no such platform exists that can be used for collaborative development of a building project, and hence, information exchange between the parties involved, and modeling programs used in a project is slow and opaque. The platforms introduced in this paper allow for much greater transparency at all stages of the building design process, and hence improve the flow of information between parties involved in the process, both firm-internal and external. While traditionally, the use of a large number of different modeling and analysis platforms is hard to manage by a project team; this paper introduces methods that strengthen the design process by using a multitude of programs needed in the different building design phases.

• International Journal of High-Rise Buildings
• /
• v.3 no.4
• /
• pp.273-278
• /
• 2014

Green roof's performance in reducing stormwater runoff has been reported by numerous studies. Nonetheless, the roles of low growing vegetation in influencing stormwater runoff reduction on green roofs have been greatly overlooked. This paper describes an experiment investigating the influence of low growing vegetation in the reduction of tropical stormwater runoff on extensive green roofs. Three types of locally occurring native vegetation and one non-native Sedum species were selected (fern, herb, grass and succulent) for the experiment. Stormwater runoff reduction performance from different low growing species was done by measuring excess water runoff from the simulated green roof modules. The results show significant differences in stormwater runoff reduction from different types of vegetation. Fern was the most effective in reducing stormwater runoff, followed by herb, Sedum and grass. Vegetative characters that are found to attribute towards the performance of stormwater runoff are rooting density, structure, density, leaf type, and vegetation biomass.

• International Journal of High-Rise Buildings
• /
• v.3 no.4
• /
• pp.311-323
• /
• 2014

This paper introduces recent applications of three-dimensional building/construction data modeling (3D) and building information modeling (BIM) to large-scale complex building construction projects in Japan. Recently, BIM has been utilized as a tool in construction process innovation through planning, design, engineering, procurement and construction to establish a front-loading-type design building system. Firstly, the background and introduction processes of 3D and BIM are described to clarify their purposes and scopes of applications. Secondly, 3D and BIM applications for typical large-scale complex building construction projects to improve planning and management efficiency in building construction are presented. Finally, future directions and further research issues with 3D and BIM applications are proposed.

• International Journal of High-Rise Buildings
• /
• v.1 no.4
• /
• pp.247-254
• /
• 2012

In order to improve the seismic behaviors of traditional steel-concrete mixed structure, a novel steel concrete mixed structure consisting of steel frames braced with buckling restrained braces (BRBs) and a concrete tube is proposed. Based on several assumptions, the simplified mechanical model of the novel mixed structure is established, and the shear and bending stiffness formulas of the steel frames, BRBs and concrete tube are respectively introduced. The equilibrium differential equation of the novel mixed structure under horizontal load is developed based on the structural elastic theory. The simplified algorithms to determine the lateral displacement and internal forces of the novel mixed structure under the inverted-triangle distributed load, uniformly load and top-concentrated load are then obtained considering several boundary conditions and compatible deformation conditions. The effectiveness of the simplified algorithms is verified by FEM comparison.

• International Journal of High-Rise Buildings
• /
• v.7 no.2
• /
• pp.161-170
• /
• 2018

Rapid urbanization, resource depletion, and limited land are further increasing the need for skyscrapers in city centers; therefore, it is imperative to enhance tall building performance efficiency and energy-generative capability. Potential performance improvements can be explored using parametric multi-objective optimization, aided by evaluation tools, such as computational fluid dynamics and energy analysis software, to visualize and explore skyscrapers' multi-resource, multi-system generative potential. An optimization-centered, software-based design platform can potentially enable the simultaneous exploration of multiple strategies for the decreased consumption and large-scale production of multiple resources. Resource Generative Skyscrapers (RGS) are proposed as a possible solution to further explore and optimize the generative potentials of skyscrapers. RGS can be optimized with waste-energy-harvesting capabilities by capitalizing on passive features of integrated renewable systems. This paper describes various resource-generation technologies suitable for a synergetic integration within the RGS typology, and the software tools that can facilitate exploration of their optimal use.

• International Journal of High-Rise Buildings
• /
• v.7 no.2
• /
• pp.95-109
• /
• 2018

Since the concept was first introduced in the 1970s, transit-oriented-development (TOD) has greatly expanded in East Asian cities such as Hong Kong. Rail stations are built together with clusters of residential-commercial towers and government services to form a new style of living - a "rail village." This paper examines the composition, scale, spatial form, organization and operation of several typical rail villages in Hong Kong. The cases range across those planned from the mid-1990s to 2015. Based on the analysis of the rail village composition, the paper derives a development ratio to indicate the density, effectiveness and efficiency of a rail village catchment area. The ratio provides a useful and direct figure for the comparison of different stations, cities and development modes.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.725-728
• /
• 2010

풍력실험결과를 이용한 풍하중 산정 방법은 고층건물에 작용하는 풍하중을 산정하는 대표적인 방법이다. 일반적인 고층건물의 경우, 이 방법은 구조물의 형상에 변화가 없다면, 구조물의 고유진동수가 증가할수록 구조물에 작용하는 풍하중 크기는 감소하는 특성을 가지고 있다. 한편, 재분배기법은 단위하중법을 통해 계산되는 변위기여도를 근거로 하여 구조물의 형상은 유지하면서 각 부재 단면의 크기만을 변화시켜서 구조물의 강성을 조절하는 설계기법이다. 이 방법은 효과적인 물량 재분배를 통해 구조물의 강성을 증가시키고 이를 통해 구조물의 고유진동수를 증가시키는 특징을 가진다. 본 논문에서는 재분배기법을 이용하여 고층건물 구조설계 시 구조물에 작용하는 풍하중 크기를 합리적으로 감소시키는 방법을 제안하였다. 제안된 방법을 풍력실험을 실시한 실구조물에 적용한 결과 구조물에 작용하는 풍하중 크기가 감소하고, 이를 통해 구조물량을 효과적으로 감소시킬 수 있음을 확인하였다.