• 한국측량학회지
• /
• 제32권3호
• /
• pp.217-223
• /
• 2014

With precise sensor position, attitude element, and imaging resolution, a simulated geospatial image can be generated. In this study, a satellite image is simulated using SPOT ortho-image and global elevation data, and the geometric similarity between original and simulated images is analyzed. Using a SPOT panchromatic image and high-density elevation data from a 1/5K digital topographic map data an ortho-image with 10-meter resolution was produced. The simulated image was then generated by exterior orientation parameters and global elevation data (SRTM1, GDEM2). Experimental results showed that (1) the agreement of the image simulation between pixel location from the SRTM1/GDEM2 and high-resolution elevation data is above 99% within one pixel; (2) SRTM1 is closer than GDEM2 to high-resolution elevation data; (3) the location of error occurrence is caused by the elevation difference of topographical objects between high-density elevation data generated from the Digital Terrain Model (DTM) and Digital Surface Model (DSM)-based global elevation data. Error occurrences were typically found at river boundaries, in urban areas, and in forests. In conclusion, this study showed that global elevation data are of practical use in generating simulated images with 10-meter resolution.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.652-655
• /
• 2004

The geometry of satellite image captured by linear pushbroom scanner is different from that of frame camera image. Since the exterior orientation parameters for satellite image will vary scan line by scan line, the epipolar geometry of satellite image differs from that of frame camera image. As we know, 2D affine orientation for the epipolar image of linear pushbroom scanners system are well-established by using the collinearity equation (Testsu Ono, 1999). Also, another epipolar geometry of linear pushbroom scanner system is recently established by Habib(2002). He reported that the epipolar geometry of linear push broom satellite image is realized by parallel projection based on 2D affine models. Here, in this paper, we compared the Ono's method with Habib's method. In addition, we proposed a method that generates epipolar resampled images. For the experiment, IKONOS stereo images were used in generating epipolar images.

• 대한원격탐사학회지
• /
• 제35권6_2호
• /
• pp.1095-1106
• /
• 2019

산불 피해는 복구, 보상 및 2차 피해 예방을 위해 빠르고 정확히 조사되어야 한다. 원격탐사 기반의 산불 피해강도 조사 방법으로 주로 산불 전과 후의 반사율 및 분광지수의 차이를 비교하고 있다. 최근 고해상도 위성영상 및 무인기 영상의 활용이 증가하고 있으나, 언제 어디에서 발생할지 예측할 수 없는 산불에 대한 발생 전 영상을 획득하는 것이 쉽지 않다. 본 연구에서는 산불 피해강도 분류에 있어 고해상도 영상과 감독분류 기법의 활용 가능성을 분석하고자 하였다. 산불 후에 촬영된 KOMPSAT-3A 영상과 무인기 다중분광영상에 반사율의 절대값을 이용하는 최대우도법과 반사율의 패턴을 이용하는 분광각매퍼의 두 가지 감독분류 기법을 적용하였다. 그 결과 분류 기법 측면에서 최대우도법이 분광각매퍼에 비해 높은 분류정확도를 보여주었으며, 이는 피해강도 등급 간에 분광반사율의 절대값은 다르지만 패턴이 유사한 등급들이 존재하기 때문인 것으로 판단된다. 공간해상도 측면에서 상대적으로 해상도가 높은 무인기 영상의 분류정확도가 위성영상보다 높게 나타났다. 그러나 무인기와 위성 영상 모두 분류정확도가 매우 높게 나타나고 있어 피해강도 분류에 활용 가능성이 높다고 할 수 있다. 따라서, 피해강도 분류에 있어 산불 후에 촬영된 고해상도 영상들을 이용할 수 있을 것으로 판단된다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.522-525
• /
• 2007

Frame Synchronization is applied to not only digital data transmission for data synchronization between transmitter and receiver but also data communication with satellite. When satellite image data with high resolution and mass storage is transmitted, hardware frame synchronizer for real-time processing or software frame synchronizer for post-processing is used. In case of hardware, processing with high speed is available but data loss may happen for Search of Frame Synchronization. In case of software, data loss does not happen but speed is relatively slow. In this paper, Pending Buffer concept was proposed to cope with data loss according to processing status of Frame Synchronization. Algorithm to process Frame synchronization with high speed using bit threshold search algorithm with pattern search technique and SIMD is also proposed.

• 대한원격탐사학회지
• /
• 제37권5_1호
• /
• pp.1215-1227
• /
• 2021

저궤도 위성영상 정보의 절대 대기 보정 처리에 의하여 산출되는 지표 반사도는 정확한 식생 분석에 필요한 기본 자료이다. Committee on Earth Observation Satellites (CEOS)는 사용자가 바로 활용할 수 있도록 하는 지표 반사도의 분석 대기 자료(Analysis Ready Data: ARD) 구축과 관련한 연구와 지침 개발이 수행되고 있다. 그러나 이러한 동향은 중저해상도 위성영상을 대상으로 하고 있어서 KOMPSAT-3A나 CAS-500과 같은 고해상도 분광 영상의 ARD를 다루는 연구는 아직 초기 단계이다. 이 연구는 우선 기존 사례를 바탕으로 하여 ARD 자료의 배포 방식을 정리하였다. 그리고 클라우드 환경에서 운영되는 위성 정보 응용 플랫폼 중의 하나인 오픈 데이터 큐브(Open Data Cube: ODC)와 ARD 자료와의 연계성을 설명하였다. 연구의 결과로 고해상도 위성영상의 실무적인 ARD 구축 단계와 ODC와 클라우드 환경에서 배포되는 고해상도 위성영상의 ARD 구축 모델과 몇 가지 유형의 개념적 수준의 응용 모델을 제시하였다. 한편 제시한 구축과 응용 모델에 대하여 데이터 가격 정책, 정확도 품질 문제, 플랫폼 적용성 문제, 클라우드 환경 문제, 국제 교류 이슈 등을 토의 사항에서 정리하였다. 지구관측 위성과 관계된 주요 국제기구인 Group on Earth Observations (GEO)와 CEOS등에서 ARD와 ODC의 확산을 위한 시스템 기술과 표준 개발을 지속하고 있으며 이러한 성과는 민간부문으로 확대되고 있다. 따라서 우리나라도 이러한 국제 추세에 대한 대응 전략을 마련할 필요가 있다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.337-339
• /
• 2003

This paper describes the SAR geocoding module, which is the sub-module of a IRHIS ('Integrated RS s/w for High resolution satellite ImageS'): package of 'Development of High Resolution Satellite Image Processing Technique' project in Electronics and Telecommunications Research Institute (ETRI). The function of this module is following. 1) Orbit Type : ERS1/ERS2, RADARSAT 2) Data Format : SAR CEOS Format(Single Look Complex) 3) Function: - Geocode : Generate a map projected SAR image based on only orbit information - Orthorectify: Generate a rigorous geocoded SAR image with a DEM information In this paper, we briefly describe the algorithm that is adopted to the functions, and component architecture.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.627-632
• /
• 2002

One main purpose of environmental monitoring after oil spill is developing ESI (Environmental Sensitivity) Maps. Environmental impacts caused by the spilt oil are strongly depending upon the coastal topology and geology. Monitoring all impacted shorelines is almost impossible; using high-resolution satellite images such as IKONOS greatly contributes to improve the efficiency of on-site researches, at the same time, reliability of ESI maps.

• 한국측량학회지
• /
• 제34권4호
• /
• pp.413-423
• /
• 2016

Worldview-3 satellite sensor provides panchromatic image with high-spatial resolution and 8-band multispectral images. Therefore, an image-sharpening technique, which sharpens the spatial resolution of multispectral images by using high-spatial resolution panchromatic images, is essential for various applications of Worldview-3 images based on image interpretation and processing. The existing pansharpening algorithms tend to tradeoff between spectral distortion and spatial enhancement. In this study, we applied six pansharpening algorithms to Worldview-3 satellite imagery and assessed the quality of pansharpened images qualitatively and quantitatively. We also analyzed the effects of time lag for each multispectral band during the pansharpening process. Quantitative assessment of pansharpened images was performed by comparing ERGAS (Erreur Relative Globale Adimensionnelle de Synthèse), SAM (Spectral Angle Mapper), Q-index and sCC (spatial Correlation Coefficient) based on real data set. In experiment, quantitative results obtained by MRA (Multi-Resolution Analysis)-based algorithm were better than those by the CS (Component Substitution)-based algorithm. Nevertheless, qualitative quality of spectral information was similar to each other. In addition, images obtained by the CS-based algorithm and by division of two multispectral sensors were shaper in terms of spatial quality than those obtained by the other pansharpening algorithm. Therefore, there is a need to determine a pansharpening method for Worldview-3 images for application to remote sensing data, such as spectral and spatial information-based applications.

• Korean Journal of Geomatics
• /
• 제2권1호
• /
• pp.47-55
• /
• 2002

Remote sensing is the science and art of obtaining information about an object, area or phenomenon through the analysis of data acquired by a device that is not in contact with the object, area, or phenomenon under investigation./sup 1)/ EOC (Electro -Optical Camera) sensor loaded on the KOMPSAT-1 (Korea Multi- Purpose Satellite-1) performs the earth remote sensing operation. EOC can get high-resolution images of ground distance 6.6m during photographing; it is possible to get a tilt image by tilting satellite body up to 45 degrees at maximum. Accordingly, the device developed in this study enables to obtain images by photographing one pair of tilt image for the same point from two different planes. KOMPSAT-1 aims to obtain a Korean map with a scale of 1:25,000 with high resolution. The KOMPSAT-1 developed automated feature extraction system based on stereo satellite image. It overcomes the limitations of sensor and difficulties associated with preprocessing quite effectively. In case of using 6, 7 and 9 ground control points, which are evenly spread in image, with 95% of reliability for horizontal and vertical position, 3-dimensional positioning was available with accuracy of 6.0752m and 9.8274m. Therefore, less than l0m of design accuracy in KOMPSAT-1 was achieved. Also the ground position error of ortho-image, with reliability of 95%, is 17.568m. And elevation error showing 36.82m was enhanced. The reason why elevation accuracy was not good compared with the positioning accuracy used stereo image was analyzed as a problem of image matching system. Ortho-image system is advantageous if accurate altitude and production of digital elevation model are desired. The Korean map drawn on a scale of 1: 25,000 by using the new technique of KOMPSAT-1 EOC image adopted in the present study produces accurate result compared to existing mapping techniques involving high costs with less efficiency.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.598-601
• /
• 2006

Satellite imagery may contain large regions covered with atmospheric aerosol. A high-resolution satellite imagery affected by non-homogenous aerosol cover should be processed for land cover study and perform the radiometric calibration that will allow its future application for Korea Multi-Purpose Satellite (KOMPSAT) data. In this study, aerosol signal was separated from high resolution satellite data based on the reflectance separation method. Since aerosol removal has a good sensitivity over bright surface such as man-made targets, aerosol optical thickness (AOT) retrieval algorithm could be used. AOT retrieval using Look-up table (LUT) approach for utilizing the transformed image to radiometrically compensate visible band imagery is processed and tested in the correction of satellite scenery. Moderate Resolution Imaging Spectroradiometer (MODIS), EO-1/HYPERION data have been used for aerosol correction and AOT retrieval with different spatial resolution. Results show that an application of the aerosol detection for HYPERION data yields successive aerosol separation from imagery and AOT maps are consistent with MODIS AOT map.