• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.1 s.31
• /
• pp.55-61
• /
• 2005

Digital Elevation Model (DEM) generation from remotely sensed imagery is crucial for a variety of mapping applications such as ortho-photo generation, city modeling. High resolution imaging satellites such as SPOT-5, IKONOS, QUICK-BIRD, ORBVIEW constitute an excellent source for efficient and economic generation of DEM data. However, prerequisite knowledge in the areas of sensor modeling, epipolar resampling, and image matching is required to generate DEM from these high resolution satellite imagery. From the above requirements, epipolar resampling emerges as the most important factors. Research attempts in this area are still in high demand and short supply. Another cause that adds to the complication of the problem is that most studies of DEM generation from IKONOS scenes have been based on rational function model. In this paper, we proposed a new methodology for DEM generation from satellite scenes using parallel projection model which is sensor independent, makes it possible for sensor modeling and epipolar resampling by only few control points. The performance and feasibility of the developed methodology is evaluated through real dataset captured by IKONOS.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.3
• /
• pp.167-174
• /
• 2017

Antarctica, where ice sheet has been declined rapidly, should be monitored periodically. However, there are difficult to access for local survey or aircraft observation due to the vast and extreme environments of the polar regions. In order to overcome this problem, there have been a lot of studies by acquiring radar or laser data by satellite. It is also difficult to accurately measure the changes of the surface where is composed of snow or ice layer, and it is also difficult to product a high-resolution DEM. This study therefore aims to product DEMs of two periods using high-resolution KOMPSAT-3A stereo images, and DEM matching is implemented by the LZD(Least-squares Z-Differences) method to detect DEM changes in both periods. As a result, the proposed method could be suggested as comparing height differences of the two DEMs within 1m precision.

• Journal of Korea Water Resources Association
• /
• v.52 no.8
• /
• pp.515-529
• /
• 2019

Geospatial information for river network and watershed boundary have played a fundamental roles in terms of river management, planning and design, hydrological and hydraulic analysis. Irrespective of their importance, the lack of punctual update and improper maintenance in currently available river-related geospatial information systems has revealed inconsistency issues between individual systems and spatial inaccuracy with regard to reflecting dynamically transferring riverine geography. Given that digital elevation models (DEMs) of high spatial resolution enabling to reproduce precise river network are only available adjacent to national rivers, DEMs with poor spatial resolution lead to generate unreliable river network information and thereby reduce their extensible applicabilities. This study first of all evaluated published spatial information available in Korea with respect to their spatial accuracy and consistency, and also provides a methodology and tool to modify existing low resolution of DEMs by means of striation of conventional or digitized river network to replicate input river network in various degree of further delineation. The tool named FSND was designed to be operated in ArcGIS ModelBuilder which ensures to automatically simulate river network striation to DEMs and delineation with different flow accumulation threshold. The FNSD was successfully validated in Seom River basin to identify its replication of given river network manually digitized based on recent aerial photograph in conjunction with a DEM with 30 meter spatial resolution. With the derived accuracy of reproducibility, substantiation of a various order of river network and watershed boundary from the striated DEM posed tangible possibility for highly extending DEMs with low resolution to be capable of producing reliable riverine spatial information subsequently.

• Korean Journal of Geomatics
• /
• v.3 no.2
• /
• pp.115-122
• /
• 2004

NASA, NSF and USGS jointly conducted airborne LIDAR surveys to acquire numerous surface points with high densities over the Antarctic Dry Valleys and its vicinity, The huge set of these points retains two characteristics undesirable for DEM generation, which are unusually high blunder ratio and large variation of the local point densities. Hence, in order to not only reduce the undesirable effects due to these characteristics but also process the huge number of points within reasonable limits of time and resources, we developed an efficient, robust, nearly automatic approach to DEM generation. This paper reports about the application of this approach to generating high-resolution precise DEMs from the Antarctic LIDAR surveys and the evaluation of their accuracy.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.2
• /
• pp.265-271
• /
• 2010

This paper discusses a new software package, DEM_Comp, developed for effectively compressing large digital elevation model (DEM) data sets based on Lempel-Ziv-Welch (LZW) compression and Huffman coding. DEM_Comp was developed using the $C^{++}$ language running on a Windows-series operating system. DEM_Comp was also tested on various test sites with different territorial attributes, and the results were evaluated. Recently, a high-resolution version of the DEM has been obtained using new equipment and the related technologies of LiDAR (LIght Detection And Radar) and SAR (Synthetic Aperture Radar). DEM compression is useful because it helps reduce the disk space or transmission bandwidth. Generally, data compression is divided into two processes: i) analyzing the relationships in the data and ii) deciding on the compression and storage methods. DEM_Comp was developed using a three-step compression algorithm applying a DEM with a regular grid, Lempel-Ziv compression, and Huffman coding. When pre-processing alone was used on high- and low-relief terrain, the efficiency was approximately 83%, but after completing all three steps of the algorithm, this increased to 97%. Compared with general commercial compression software, these results show approximately 14% better performance. DEM_Comp as developed in this research features a more efficient way of distributing, storing, and managing large high-resolution DEMs.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.7-10
• /
• 2008

We present a technique for constructing a digital elevation model (DEM) from contours. The elevation of each ground point in DEM is computed by interpolating the heights of the two adjacent contours of the point. The technique decomposes each sub-domain between adjacent contours into a set of sub-regions. The decomposition is accomplished by constructing a medial axis of the sub-domain. Each sub-region in the decomposition is classified into a variety of terrain features like hillsides, valleys, ridges, etc. The elevations of points are interpolated with different methods according to terrain features they belong to. For a given point in hillside, an approximate gradient line passing through the point is determined and the elevation of the point is interpolated from the known elevations of the two adjacent contours along the approximate gradient line. The univariate monotone rational Hermite spline is used for the interpolation. The DEM constructed by the technique is to be used to orthorectify the high-resolution KOMPSAT3 imagery.

• Vacuum Magazine
• /
• v.4 no.4
• /
• pp.18-22
• /
• 2017

Transmission electron microscopy (TEM) is a versatile and powerful technique that enables direct visualization of biological samples of sizes ranging from whole cell to near-atomic resolution details of a protein molecule. Thanks to numerous technical breakthroughs and monumental discoveries, 3D electron microscopy (3DEM) has become an indispensable tool in the field of structural biology. In particular, development of cryo-electron microscopy(cryo-EM) and computational image processing played pivotal role for the determination of 3D structures of complex biological systems at sub-molecular resolution. Here, basis of TEM and 3DEM will be introduced, especially focusing on technical advancements and practical applications. Also, future prospective of constantly evolving 3DEM field will be discussed, with an anticipation of great biological discoveries that were once considered impossible.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.6
• /
• pp.309-316
• /
• 2018

The high-resolution satellite images provided by Kompsat-3A, a multipurpose satellite, have various applications such as digital map generation, 3D image generation, and DEM generation. In order to utilize high-resolution satellite images, the user must create an orthoimage in order to use the image in a suitable manner. The position and the number of the ground reference points affect the accuracy of the orthoimage. In particular, the Kompsat-3A satellite image has a high resolution of about 0.5m, so the difficulty in selecting the ground control points and the accuracy of the selected point will have a great influence on the subsequent application process. Therefore, in this study, we analyzed the influence of the number of ground reference points on the accuracy of the terrestrial satellite images.

• KCID journal
• /
• v.14 no.1
• /
• pp.80-88
• /
• 2007

The Shuttle Radar Topography Mission (SRTM) obtained elevation data on a near-global scale to generate the most complete high-resolution digital topographic database of Earth. SRTM consisted of a specially modified radar system that flew onboard the Space shuttle SRTM consisted of a specially modified radar system that flew onboard the Space Shuttle Endeavour during an 11-day mission on February 2000. Since 2004, in a GLCF (Global Land Cover Facility, http;//glcf.umiacs.umd.edu/) web-site, products of SRTM including 1Km and 90m resolutions for outside US and a 30m resolution for the US have been provided. This study is to assess the accuracy of SRTM-DEM in comparing with NGIS-DEM generated from NGIS digital topographic map(1:25,000) in Guem river watershed. For the Geum river watershed, SREM-DEM elevation ranged from 0 to 1,605m and NGIS-DEM ranged from 6 to 1,610m, and the average elevation of SRTM-DEM was 226.7m and 218.9m for NGIS-DEM, respectively. NGIS-DEM was subtracted from SRTM in three zones -Zone I (0~100m), Zone II (100~400m), Zone III (over 400m)- to estimate difference between SRTM and NGIS-DEM. As the results, the differences of these DEM were 5.2m (11.6%) in Zone I, 8.8m (3.8%) in Zone II, 12.5m (2.1%) in Zone III. Although there were differences between SRTM-DEM and NGIS-DEM, SREM-DEM would be possible to be utilized as DEM data for the region where DEM is not prepared.

• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.7-12
• /
• 2009

고해상도 위성영상을 이용한 DEM 제작의 경우 영상의 센서모델과 정합을 이용한 방식이 일반적으로 사용되어 왔다. 이 방식의 경우 영상에 존재하는 건물 및 도로, 그리고 지역 등에 따라 오류가 발생하게 되며 이는 DEM의 제작 시 공백(Hole)이나, 오류(Blunder)의 원인이 된다 이 방식을 보완하기 위하여, 본 실험에서는 1m 급의 공간해상도를 가지는 스테레오 위성 영상을 이용하여 제작된 고해상도 DEM을 제작해보았으며, 전 세계적으로 제작되어 있는 30m 정확도를 가지는 DTED를 이용하여 동일지역의 DEM의 갱신을 시도하였다. 고해상도 스테레오 위성영상에서 매칭 결과로 구해진 높이 값과 30m DTED와의 결과 비교를 통해 최상위 피라미드 단계에서의 DEM의 제작 시 발생할 수 있는 에러들을 걸러냄으로 정확한 DEM의 생성을 시도하였으며, 새롭게 구해진 DEM의 높이 값을 30m DTED의 높이 값에 근사시켜 기존의 방식보다 더 부드러운 고해상도 DEM의 제작이 가능함을 확인할 수 있었다.