• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제21권9호
• /
• pp.987-994
• /
• 2010

In this paper, a simple and effective active load-pull method is proposed, and the method to improve the efficiency of X-band power amplifier using harmonic control circuit is presented. The proposed active load-pull system mainly consists of directional coupler, phase shifter, short circuit, and power amplifier, and allows a user to access reflection coefficients near the edge of the Smith chart($\Gamma$=1) easily. The device used in this paper is Mitsubishi's GaAs FET MGF1801, and the operating frequency of the power amplifier is 9 GHz, The amplifier had output power of 21.65 dBm and drain efficiency of 24.9 % at class-A, and had output power of 21.46 dBm and drain efficiency of 53.3 % at class-AB. Harmonic control circuit is designed only second and third harmonic components because of the bandwidth limitation of the microwave components. The drain efficiency is improved as much as 6.4 % compared with class-AB power amplifier.

• Journal of The Korean Association For Science Education
• /
• 제35권4호
• /
• pp.557-564
• /
• 2015

The purpose of this study is to examine the problems in the teaching practice of beginning science teachers who participated in the collaborative mentoring program to improve their teaching expertise. The participants were six beginning science teachers and six mentors at middle and high school levels. From each beginning science teacher and mentor teacher, journals, one-to-one mentoring records and transcripts, interviews and questionnaires, and transcripts conducted at the beginning, middle and the end of the mentoring program were collected. Seven aspects of the beginning science teachers' problems in their teaching practice were identified. The result showed that mentee teachers didn't set up specific learning objectives and they organized and presented lesson contents without considering students' proficiency level. Also, they found it hard to prepare for the lessons irrelevant to their major field of study and they tended to use convergent questions more than divergent questions. Mentee teachers tend to give teacher-centered rather than student-centered teaching. Beginning teachers' recognition of their problems in their teaching practice tends to lead changes in their teaching practice. Some of the problems that mentee teachers showed could be overcome if they recognized the problem through the collaborative mentoring program, but if not, it tends to remain throughout mentoring program.This study also highlighted the importance of reflection on beginning science teachers' practice.

• 보존과학연구
• /
• 통권37호
• /
• pp.27-41
• /
• 2016

This study surveyed color awareness and color systems according to pedigree(Ilseob, Woljoo, Hyegak, Manbong ect.) targeting Dancheongjang (craftsman) who has inherited Dancheong (traditional multicolor). From the survey of color awareness, standardized color system of 'traditional color' awareness by Dancheongjang is 'the color inherited by the master' and it was identified that there is the standardized color system in awareness and its standard is either same or similar to traditional Dancheong. Also, according to each period, colors of Dancheong have been changed, it was thought that change in color materials and preference had went with times. From eleven main colors of Dancheong, chromaticity materials which were preferred by Dancheongjang were analyzed by the faction of Dancheongjang and colors and it resulted in a variety of color ranges over all. In the case of Yangnok, Noerok, Juhong it showed a high deviation with a wide color range while there was a low deviation with a narrow color range in Hayeop, Daja, Seokganju. Through this study it was difficult to identify clear correlations and tendencies of color system by the faction of Dancheongjangs. This is judged to be a reflection of the subjective artistry of the members.

• The KIPS Transactions:PartD
• /
• 제13D권4호
• /
• pp.557-564
• /
• 2006

Information is used effectively and contributes in profit creation and not only support management judgment quick but important resource to be possible recycled. The recent information systems improve enterprise's competitive power by reflection of user's various requirements and becoming big and complex for adaptation of rapidly circumstance change. Also it is trend that importance of information quality is emphasized gradually. The biggest problem in user requirement that is based on low quality data support. In case of business management is achieved by low quality information, company can not help dropping their competitive power such as company's strategy establishment, strategy achievement and management concentration breakup against competitor. Information of low quality increase time and expense to improve inaccurate data or revise and it is hard to accept correct information from specific situation. To solve these problems, we have to gain high quality data through definite comprehension, data management system establishment, and systematic data management achievement etc. Up to now, information quality and connected study were developed partially, but systematic methodology of information quality management's whole condition was not existed. Therefore, in this paper can show you how to extract process for information quality management & related evaluate factor with CMM (Capacity Maturity Mode]) 5 steps that is information warranty of quality process step. This paper whishes to contributes in competitive company or organization activity through information quality improvement management process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제19권9호
• /
• pp.130-138
• /
• 2018

This study was a descriptive study, analyzing the clinical judgment process that occurs in a simulation of practice education for nursing students applying to LCJR. Subjects were two nursing college students in S city. Fever scenario and apnea scenario, including mock patient, were implemented. Data collection was conducted between September, 2013 and December, 2014. Data analysis was performed using descriptive statistics, paired t-test, and Pearson's correlation of PASW statistics 18.0 program. The result of this study revealed that the clinical judgment scores of nursing college students were 30.50 for males and 29.32 for females. Nursing Clinical judgment score for the apnea scenario was higher than the score for the febrile scenario, and nursing students' self-evaluation and professors' evaluation showed a significant correlation with respect to the responding domain. In comparison the student and faculty ratings, domain of interpreting and domain of reflecting were significant This study will provide educators with foundational knowledge of program development to enhance nursing students' clinical judgment abilities. We suggest more discussion on their nursing practice and judgment during debriefing session may be beneficial for students.

• Journal of the Korean institute of surface engineering
• /
• 제29권6호
• /
• pp.809-815
• /
• 1996

$Y_2O_3$-based metal-insulator-semiconductor (MIS) structure on p-Si(100) has been studied. Films were prepared by UHV reactive ionized cluster beam deposition (r-ICBD) system. The base pressure of the system was about $1 \times 10^{-9}$ -9/ Torr and the process pressure $2 \times 10^{-5}$ Torr in oxygen ambience. Glancing X-ray diffraction(GXRD) and in-situ reflection high energy electron diffracton(RHEED) analyses were performed to investigate the crystallinity of the films. The results show phase change from amorphous state to crystalline one with increasingqr acceleration voltage and substrate temperature. It is also found that the phase transformation from $Y_2O_3$(111)//Si(100) to $Y_2O_3$(110)//Si(100) in growing directions takes place between $500^{\circ}C$ and $700^{\circ}C$. Especially as acceleration voltage is increased, preferentially oriented crystallinity was increased. Finally under the condition of above substrate temperature $700^{\circ}C$ and acceleration voltage 5kV, the $Y_2O_3$films are found to be grown epitaxially in direction of $Y_2O_3$(1l0)//Si(100) by observation of transmission electron microscope(TEM). Capacitance-voltage and current-voltage measurements were conducted to characterize Al/$Y_2O_3$/Si MIS structure with varying acceleration voltage and substrate temperature. Deposited $Y_2O_3$ films of thickness of nearly 300$\AA$ show that the breakdown field increases to 7~8MV /cm at the same conditon of epitaxial growing. These results also coincide with XPS spectra which indicate better stoichiometric characteristic in the condition of better crystalline one. After oxidation the breakdown field increases to 13MV /cm because the MIS structure contains interface silicon oxide of about 30$\AA$. In this case the dielectric constant of only $Y_2O_3$ layer is found to be $\in$15.6. These results have demonstrated the potential of using yttrium oxide for future VLSI/ULSI gate insulator applications.

• Journal of the Korean School Mathematics Society
• /
• 제16권1호
• /
• pp.1-29
• /
• 2013

The main goal of the research is to develop instructional consulting manual to help math teachers improve classroom teaching. Improving the quality of teaching in schools is stressed as a central focus of meaningful classroom instruction and high quality education. In this research, teaching consulting was defined as an activity that covers reflection process oriented towards formative assessment and continuing professional development. Within this context, subject-specific teaching consulting and teaching professionalism with focus on PCK was reviewed. Further, the questionnaire survey was conducted to investigate the current situation of teaching consulting and teachers' needs for consulting. And also, specific examples of subject-specific consulting based on our previous consulting experiences in math classes were shown. Alternative ways to improve subject teaching were derived through the conferences where consultants and consultees analyze video-taped lessons conducted by the consultees. By those results, a manual for invigorating teaching consulting was developed. The contents of the manual consists of setting conditions of teaching consulting and its implementation in the classroom teaching. The first part of the manual contains steps to establish teaching consulting system, the qualification and role of the consultant, system evaluation, etc. The second part of the manual presents the pre-preparation, prescription and implementation and follow-up management steps. Each part of the manual provides consultants with specific guidelines for each step. Finally, recommendations for making policy related to ways to invigorate teaching consulting was suggested. It is expected that specific examples and cases of subject-specific teaching consulting presented in this research will be used to narrow the gap between theory and practice of teaching consulting, and to help math, science and English teachers develop teaching professionalism.

• Korean Journal of Materials Research
• /
• 제23권12호
• /
• pp.672-679
• /
• 2013

$Fe_4[Fe(CN)_6]_3$ coated on a mica or $TiO_2$/mica surface as infrared reflective blue pigment was prepared by a hydrothermal method. $Fe_4[Fe(CN)_6]_3$, used as coloring agent, was uniformly coated on mica or $TiO_2$/mica under the optimized condition of a 1.2 : 1 weight ratio between iron(III) chloride hexahydrate and potassium ferrocyanidetrihydrate at the initial pH level of 4.5 at $70^{\circ}C$. The infrared (IR)-reflective pigments were characterized by SEM, Zeta-potenial, FT-IR, and UV-VIS NIR spectrophotometry. Especially the CIE color coordinate and total solar reflectance(TSR) properties of the pigments were investigated in relation to variation of the coating and coated substrate thicknesses. Isolation-heat paint was prepared with 20 wt% blue pigments fully dispersed in acryl-urethane resin and several additives to coat the film uniformly. The films were also measured with CIE color coordinate, TSR, and the surface temperature was recorded by an isolation-heat measuring system. The pigments and films of $Fe_4[Fe(CN)_6]_3$ coated on mica and $TiO_2$/mica showed high TSR values compared with the TSR value of $Fe_4[Fe(CN)_6]_3$ itself. According to the increase of TSR value, the property of isolation-heat is effective. To realize the optimal blue color, we applied the the pigment to $TiO_2$ coated mica(TM(b)) which has blueish interference color. The pigment of $Fe_4[Fe(CN)_6]_3$ coated on TM(b) shows a strong blue color compared with that of $Fe_4[Fe(CN)_6]_3$ coated on $TiO_2$/Mmca(TM(w)), which has a whitish interference color.

• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.148-148
• /
• 2000

지금까지 반도체 표면에 대한 연구는 주로 (1000, (111) 표면 등 낮은 밀러 지표를 가진 표면에 대해 이루어져 왔다. 이에 반해 밀러 지표가 높은 Si 면은 불안정하고, 가열하면 다른 표면, 즉 지표가 낮은 면으로 재배열하는 경향이 있는 것으로 알려져 있는데 아직 이들 높은 밀러 지표를 가진 표면에 대한 연구는 미미한 상태이다. 그러나, Si(113)면은 밀러 지표가 높으면서도 안정하기 때문에 Si(113)의 구조를 정확하게 알 수 있다면 밀러 지표가 낮은 Si 표면이 안정한 이유를 이해할 수 있을 것이다. 따라서 본 연구에서는 TOF-CAICISS 장치(Time of Flight - CoAxial Impact Collision Ion Scattering Spectroscopy) 장비와 RHEED(Reflection High Energy Electron Diffrction)를 이용하여 Si(113) 표면의 구조와 Si(113) 표면의 온도에 따른 구조 변화를 관찰하였다. TOF-CAICISS 실험결과를 보면 (3$\times$2)에서 (3$\times$1)으로 상변환하면서 Si(113) 표면에 오각형을 이루는 dimer 원자들과 adatom 원자들간의 높이차가 작아짐을 알 수 있다. RHEED 실험결과와 전산 모사 결과로부터 상온에서 Si(113)(3$\times$2) 구조를 가지다가 45$0^{\circ}C$~50$0^{\circ}C$에서 Si(113) (3$\times$1) 구조로 상변환한다는 것을 알 수 있다. 그러나, 아직 상전이 메카니즘은 명확하게 밝혀지지 않았다. 실험결과를 전산 모사와 비교함으로써 Si(113) 표면에 [33]방향으로 이온빔을 입사시켰을 경우 dabrowski 모델과 Ranke AI 모델이 적합하지 않다는 것을 알 수 있다./TEX>, shower head의 온도는 $65^{\circ}C$로 설정하였다. 증착된 Cu 박막은 SEM, XRD, AFM를 통해 제작된 박막의 특성을 비교.분석하였다. 초기 plasma 처리를 한 경우에는 그림 1에서와 같이 현저히 증가한 초기 구리 입자들이 관측되었으며, 이는 도상 표면에 활성화된 catalytic site의 증가에 기인한다고 보여진다. 이러한 특성은 Cu films의 성장률을 향상시키고, 또한 voids를 줄여 전기적 성질 및 surface morphology를 향상시키는 것으로 나타났다. 결과 필름의 잔류 응력과 biaxial elastic modulus는 필름의 두께가 감소함에 따라 감소하는 경향을 나타냈으며, 같은 두께의 필름인 경우, 식각 깊이에 따른 biaxial elastic modulus 의 변화를 통해 최적의 식각 깊이를 알 수 있었다.도의 값을 나타내었으며 X-선 회절 data로부터 분석한 박막의 변형은 증온도에 따라 7.2%에서 0.04%로 감소하였고 이 이경향은 유전손실은 감소경향과 일치하였다.는 현저하게 향상되었다. 그 원인은 SB power의 인가에 의해 활성화된 precursor 분자들이 큰 에너지를 가지고 기판에 유입되어 치밀한 박막이 형성되었기 때문으로 사료된다.을수 있었다.보았다.다.다양한 기능을 가진 신소재 제조에 있다. 또한 경제적인 측면에서도 고부가 가치의 제품 개발에 따른 새로운 수요 창출과 수익률 향상, 기존의 기능성 안료를 나노(nano)화하여 나노 입자를 제조, 기존의 기능성 안료에 대한 비용 절감 효과등을 유도 할 수 있다. 역시 기술적인 측면에서도 특수소재 개발에 있어 최적의 나노 입자 제어기술 개발 및 나노입자를 기능성 소재로 사용하여 새로운 제품의 제조와 고압 기상 분사기술의 최적화에 의한 기능성 나노 입자 제조 기술을 확립하고 2차 오염 발생원인 유기계 항균제를 무기계 항균제로 대체할 수 있다.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• 제2권1호
• /
• pp.8-13
• /
• 1997

The Holocene mud deposits in the southeastern innershelf of the Korean Peninsula were studied using the shallow seismic reflection profiles coupled with sediment sampling. The Holocene mud deposits are developed as a belt in the innershelf area from the mouth of the Nakdong River to off Pohang along the coastline. The surficial sediments in the study area gradually become finer and well sorted from south to north. The seismic facies in the Holocene sequence change northward from parallel reflectors in the mouth of the Nakdong River and northeastward prograding reflectors in the southern part off Ulsan to transparent layer in the nearshore off Ulsan to Pohang. The regional difference of seismic facies indicates that the Holocene sediment characters are varied with localities. By combining the surficial sediments properties with seismic facies patterns, the suspended sediments mostly supplied from the Nakdong River may be transported northward along the shore by the north-flowing Tsushima warm current. The Holocene mud sequence overlying the ravinement surface which is produced by erosion of underlying sediments during a rapid transgression can be interpreted as the highstand system tracts probably formed during the highstand of sea level similar to the present-day sea level.