• Journal of the Korean Magnetics Society
• /
• v.11 no.3
• /
• pp.85-96
• /
• 2001

Experimental magnetization-temperature curves for melt-spun ribbons of amorphous alloys (Dy$\_$0.33/Fe$\_$0.67/)$\_$1-x/B$\_$x/(x=0 ,0.05, 0.1, and 0.15) and (Sm$\_$0.33/Fe$\_$0.67/)$\_$1-x/B$\_$x/(x=0, 0.01, 0.02, and 0.03) (in atomic fraction) are fitted with theoretical equations based on the mean field theory in order to calculate exchange couplings between constituent elements as a function of the B content. In the case of the DyFe$_2$-B system, the sign of the exchange coupling between Dy and Fe is negative, indicating that the magnetization direction of Dy is antiparallel to that of Fe. The sign of the other two couplings are positive indicating a parallel alignment. The exchange coupling between Fe ions are greatest, while that between Dy ions is negligible. In the case of the SmFe$_2$B alloys, the sign of all the couplings are positive, indicating ferromagnetic coupling between the spins. The exchange couplings between Fe ions, and Fe and Sm are comparable to each other, but they are much greater than that between Sm ions. The high exchange coupling between Fe and Sm, which is considered to occur indirectly, is rather unexpected, but it is considered to be unique characteristics of amorphous Sm-Fe alloys. In both alloy systems, the exchange coupling between Fe ions increases with increasing B content. and this may be explained by the increase of the Fe-Fe separation with increasing B content. The exchange coupling between Fe and RE also increases with increasing B content. As the B content increases, the magnetization decreases over the whole temperature range, and the Curie temperature also decreases.

• The Journal of the Petrological Society of Korea
• /
• v.18 no.3
• /
• pp.223-236
• /
• 2009

Ultramafic xenoliths from southeastern part of Jeju Island can be grouped into two types: Type I and Type II. Type I xenoliths are magnesian and olivine-rich peridotite (mg#=89-91), which are commonly found at the outcrop. Most previous works have been focused on Type I xenoliths. Type II xenoliths, consisting of olivine, orthopyroxene and clinopyroxene with higher Fe and Ti components (mg#=77-83) and lower Mg, Ni, Cr, are reported in this study. They are less common with a more extensive compositional range. The studied Type II xenoliths are wehrlite, olivine-clinopyroxenite, olivine websterite, and websterite. They sometimes show ophitic textures in outcrops indicating cumulate natures. The textural characteristics, such as kink banding and more straight grain boundaries with triple junctions, are interpreted as the result of recrystallization and annealing. Large pyroxene grains have exsolution textures and show almost the same major compositions as small exsolution-free pyroxenes. Although the exsolution texture indicates a previous high-temperature history, all mineral phases are completely reequilibrated to some lower temperature. Orthopyroxenes replacing clinopyroxene margin or olivine indicate an orthopyroxene enrichment event. Mineral phases of Type II are compared with Type I xenoliths, gabbroic xenoliths, and the host basalts. Those from Type II xenoliths show a distinct discontinuity with those from Type I mantle xenoliths, whereas they show a continuous or overlapping relation with those from gabbroic xenoliths and the host basalts. Our petrographic and geochemical results suggest that the studied type II xenoliths appear to be cumulates derived from the host magma-related system, being formed by early fractional crystallization, although these xenoliths may not be directly linked to the host basalt.

• Journal of Oral Medicine and Pain
• /
• v.31 no.3
• /
• pp.211-221
• /
• 2006

Purpose The aims of this study were to evaluate micro-tensile bond strength of composite resin bonded to dentin following high-speed rotary handpiece preparation or Er:YAG laser preparation with two different adhesive systems and to assess the influence of different Er:YAG laser energies on the micro-tensile bond strength. Materials and Methods In this study, 40 third morlars were used. Flat dentin specimans were obtained and randomly assigned to eight groups. Dentin surfaces were prepared with one of four cutting types: carbide bur, Er:YAG laser (2 W, 3 W and 4 W) and conditioned with two bonding systems, Scotchbond Multipurpose Plus (SM), Clearfil SE bond (SE) and composite resin-build ups were created. After storage for 24 hours, each specimen was serially sectioned perpendicular to the bonded surface to produce more than thirty slabs in each group. Micro-tensile bond strength test was performed at a crosshead speed of 1.0 mm/min. Micro-tensile bond strengths (${\mu}TBS$) were expressed as means$\pm$SD. Data were submitted to statistical analysis using two-way ANOVA, one-way ANOVA, Student-Newman-Keuls' multiple comparison test and t-test. Results and Conclusion 1. Regardless of bonding systems, the ${\mu}TBS$ according to cutting types were from highest to lowest : 3 W, 2 W, Bur, and 4 W. In addition, there was no significant difference between Bur and 4 W (p<0.001). 2. Regardless of cutting types, SM showed significantly higher ${\mu}TBS$ than SE (p<0.001). 3. Bonding to dentin conditioned with SM resulted in higher ${\mu}TBS$ for 3 W compared to Bur, 2 W, and 4 W. There was no significant difference between 2 W and Bur (p<0.001). 4. Bonding to dentin conditioned with SE resulted in higher ${\mu}TBS$ for 3 W compared to 2 W, 4 W, and Bur. Bur exhibited significant lower ${\mu}TBS$ than all other cutting types. There were no significant differences between 3 W, 2 W and between 4 W and Bur (p<0.001). 5. The ${\mu}TBS$ of laser cutting groups were shown in order from highest to lowest: 3 W, 2 W and 4 W in two bonding systems. There was no significant difference between 2 W and 3 W in SE (p<0.001). : The ${\mu}TBS$ of composite resin bonded dentin was significantly affected by interaction between the cutting type and bonding system. In the range of 2 W-3 W, cavity preparation of the Er:YAG laser seems to supply good adhesion of composite resin restoration no less than bur preparation. In particular, if you want to use the self-etching system, including Clearfil SE bond for the purpose of a simplification of the bonding procedures and prevention of adverse effects by excessive etching, an Er:YAG laser may offer better adhesion than a bur.

• Journal of dental hygiene science
• /
• v.9 no.4
• /
• pp.453-459
• /
• 2009

The purposes of this research were to evaluate the relationships of between characteristics of noise and annoyance of dental hygienist by noise in dental clinic. To investigate the dental clinic workers' reactions to noise when occurred in dental clinic, the noise level test in dental clinic and questionnaire were taken. As a result of noise evaluation, It shows that the range of noise level was 67.7~78.3dB(A) and frequency was very high (more than 4KHz). It's seem to be begins occurrence of stamina-loss, contraction of peripheral blood vessel, decrease of adrenocortical hormones. Most of respondents were affected by noise: 67% of respondents were nervous about noise and the rest of respondents were bearable. Analysis by NR-curve showed that it was exceed the noise permit level in working space. As a result of correlation - test, the more exposed dental hygienist to noise, the more felt the unpleasantness and fatigue. It's hard to sufficient explanation to patients about the dental treatment. So it's thoughts that insufficient explanation will negative impact on the patients' satisfaction and increase competitiveness in dental clinics. To remedy a unpleasantness and fatigue of noise in dental hygienist, it's considered that making an offer the ear protection and choosing the low noise-vib. equipment and using the masking effect. Therefore, It can be provide a pleasant working environment with dental hygienist and It will have a great advantage to dental clinics to improve their competitiveness.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.3 no.2
• /
• pp.213-233
• /
• 1996

This study was made on 274 apoplectics patients who received the rehabilitation therapy and tests on physical, psychological and social adaptations as outpatients in 23 general hospitals in the Seoul and Kyungi area. The basic data on degree of improvement of apoplectic patients studied from rehabilitation therapy. Data was collected over a period of 63 days, from February 21st till April, 23, 1996. The assigned physical therapist conducted direct interviews with patients after he answered the distributed questionnaires for each individual patient. The colleted data was processed by the $SPCC/C^+$ method. The results of the tests conducted to meascne the the degree of ADL dependency, depression and social activity corresponding to the physical, psychological, and social adaptation. The details are ; 1) The test to meascne the degree of ADL dependency, corresponding to the study of physical adaptation of CVA patients, indicated a mean score of 2.57(ideal score is 1.0) with a standard deviation of ${\pm}0.75$. The worst score was 3.95 while the best score was a perfect 1.0, representing a severe range of dependency. The distribution was centered with a median of 2.65 and a mode of 2.68. 2) The test to meascne the degree of depression which corresponds to the level of psychological adaptation yielded a mean of 2.99 which is higher than the normal limit of 2.45. The standard deviation was ${\pm}0.52$ and the worst score and the best score were 4.35 and Respectirdy. The distribution was centered with a median of 3.00 and a mode of 3.00. 3) The test to meascne the degree of social activities for the level of social adaptation indicated a very low mean score of 26.52 (perfect score is 144), with the standard deviation of ${\pm}16.23$. Some patients scored as high as 100, but others scored as low as 3. The distribution of social activities at a very low level was shifted to the left with a median of 24.00 and a mode of 20.00. 4) Factors influencing the level of physical, psychological and social adaptation are as follows : Factors significantly influencing the level of physical adaptation measured by ADL dependency are age, personal guardian, payer of medical expenses, and paralysis of the right arm, right leg and facial paralysis. Factors significantly influencing the level of psychological adaptation measured by the degree of depression, are age, marital status, education, medical history of individual and family, speech impediment, and facial paralysis. Factors significantly influencing the level of social adaptation measured by the degree of social activity are age, marital status, education, employment status, and the burden of medical expense. 5) The Corelationship is significant(9.00), between ADL dependeing as degree of physical adaptation and depreseion as degree of psychologial adaptation. ADL dependency is proportional to depression. But social activity is inversely protional to ADL dependeny and depression. In conclusion, the increased care for physical function of the patients is not the only necessary means to better facilitate the appropriate adaptation of CVA patients. The introduction of a solid rehabilitation program for psychological and social adaptation will also play the integral part of the treatment of CVA patients.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.2
• /
• pp.159-163
• /
• 1996

Background : In case of tuberculous pneumonia, differentiation from bacterial lobar pneumonia is sometimes very difficult because clinical symptoms, signs and radiological images are very similar. So we investigated the usefulness of CA125, which is known to increase in tuberculous diseases, in differential diagnosis between tuberculous pneumonia (TBPN) and community acquired bacterial lobar pneumonia (LP). Methods : Serum CA125 level was measured in 20 patients with TBPN (female 12 male 8 : mean age 36.1 years) and 14 patients with LP (female 5 male 9 : mean age 45.1 years) by radioimmunoassay (Centocor(R) CA125 RIA kit). Results : 1) The serum CA125 level in TBPN ($333.7{\pm}283.5\;u/ml$) was higher than in LP ($60.9{\pm}66.2\;u/ml$). (P < 0.05) 2) If we took cut-off value as 195 u/ml in differential diagnosis between TBPN and LP, the sensitivity and specificity of CA125 level in the diagnosis of TBPN were 70% and 93%, respectively. 3) There was no significant difference in serum CA125 level between noncavitary TBPN ($242.1{\pm}76.6\;u/ml$, n=10) and cavitary TBPN ($399.6{\pm}318.4\;u/ml$, n=10). (P > 0.05) 4) Following up of serum CA125 level after initiation of antituberculosis treatment showed rapid decline and approach to near normal range in 6 months. Conclusion : High serum CA125 level (> 195 u/ml) was useful in differential diagnosis of TBPN from LP.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.175-184
• /
• 2008

Purpose: This study was designed to investigate the fitness of adjustable dental impression trays on the Chinese and the Japanese. Material and methods: Initial design of the adjustable dental trays was developed from the results of the dental arch size of Korean adults. This design was applied to the CAD-CAM process in order to create tray model samples. Simple silicon-base molds were then replicated based on these sample models. Polyurethane injection into the silicon- base molds completed the process of creating a large number of test products. 60 Chinese dental students (male:30, female:30) from the Shanghai Second Medical University and 60 Japanese alumni from the Kumamoto high school (male:30, female:30) were selected for taking irreversible hydrocolloid impression with these trays. The width and length of the impression body were measured on several measuring points by Vernier caliper. The results were analyzed statistically to evaluate the fitness of the trays. Results: 1. Uniform impression material thickness was achieved on the Chinese and Japanese by controlling the width of the tray using stops and beveled guides. The material thickness was generally within the range of 3 mm to 6 mm. 2. In the maxillary tray of the Chinese, average thickness of the impression material of the labial vestibule of the incisal teeth was 6.2 mm, the canine was 5.9 mm and the midpalatal part 10.5 mm and the posterior palatal part 9.7 mm. These were relatively large values. 3. In the mandibular tray of the Chinese, average length of the impression material of the lingual vestibule of first, second premolar contact point was 8.9 mm, the incisal teeth was 7.8 mm and thickness of the labial part of canine was 6.8 mm and premolars 7.0 mm. These were relatively large values. 4. In the maxillary tray of the Japanese, average thickness of the impression material of the labial vestibule of the incisal teeth was 7.4 mm, the canine was 7.7 mm and the midpalatal part 9.1 mm. These were relatively large values. 5. In the mandibular tray of the Japanese, average thickness of the impression material of the labial vestibule of first, second premolar contact point was 8.4 mm, and thickness of the labial part of canine was 7.4 mm. These were relatively large values. Conclusion: This adjustable dental tray shows good accuracy to Korean because it was designed by the analysis of the dental arch size of Korean adult model. With this result, it can be applied to Chinese and Japanese, we can take more easy and accurate dental impressions.

• Journal of the Korean Magnetics Society
• /
• v.5 no.4
• /
• pp.269-274
• /
• 1995

The basic composition of Mn-Zn ferrite was $Mn_{0.631}Zn_{0.316}Fe_{2.053}O_{4}$(specimen A), $Mn_{0.584}Zn_{0.312}Fe_{2.104}O_{4}$(specimen B) and $Mn_{0.538}Zn_{0.308}Fe_{2.154}O_{4}$(specimen C) with additional 0.1 mol % $CaCo_{3}$ and 0.04 mol % $V_{2}O_{5}$. For high per¬meability and acceleration of grain growth, $CaCo_{3}$ and $V_{2}O_{5}$. was added. The mixture of the law materials was calcinated at $950^{\circ}C$ for 3 hours and then milled. The compacts of toroidal type were sintered at different temperature($1250^{\circ}C$, $1300^{\circ}C$, $1350^{\circ}C$) for 2 hours in $N_2$ atmosphere. The effects of the various raw material composition and sintered temperature on the physical properties of Mn-Zn ferrite have been investigated. They turned out to be spinel structure by X-ray diffraction and the size of grain from SEM was from $18\;\mu\textrm{m}\;to\;23\;\mu\textrm{m}$. As the sintering temperature was increased from $1250^{\circ}C$ to $1350^{\circ}C$, the initial permeability and magnetic induction has increased and the both of Q factor and coercive force has decreased. The coercive force and curie temperature were almost the same at each specimen Their values were about 0.45 Oe and $200^{\circ}C$. The frequency of specimen will used in the range from 200 kHz to 2 MHz. The basic composition of $Mn_{0.584}Zn_{0.312}Fe_{2.104}O_{4}$(specimen B) sintered at $1300^{\circ}C$ shows the best results at magnetic induction (Br & Bm).

• Journal of the Korean Vacuum Society
• /
• v.19 no.4
• /
• pp.307-313
• /
• 2010

One-dimensional cubic phase silicon carbide nanowires (${\beta}$-SiC NWs) were efficiently synthesized by thermal chemical vapor deposition (TCVD) with mixtures containing Si powders and nickel chloride hexahydrate $(NiCl_2{\cdot}6H_2O)$ in an alumina boat with a carbon source of methane $(CH_4)$ gas. SEM images are shown that the growth temperature (T) of $1,300^{\circ}C$ is not enough to synthesize the SiC NWs owing to insufficient thermal energy for melting down a Si powder and decomposing the methane gas. However, the SiC NWs could be synthesized at T>$1,300^{\circ}C$ and the most efficient temperature for growth of SiC NWs is T=$1,400^{\circ}C$. The synthesized SiC NWs have the diameter with an average range between 50~150 nm. Raman spectra clearly revealed that the synthesized SiC NWs are forming of a cubic phase (${\beta}$-SiC). Two distinct peaks at 795 and $970 cm^{-1}$ in Raman spectra of the synthesized SiC NWs at T=$1,400^{\circ}C$ represent the TO and LO mode of the bulk ${\beta}$-SiC, respectively. XRD spectra are also supported to the Raman spectra resulting in the strongest (111) peaks at $2{\Theta}=35.7^{\circ}$, which is the (111) plane peak position of 3C-SiC. Moreover, the gas flow rate of 300 sccm for methane is the optimal condition for synthesis of a large amount of ${\beta}$-SiC NW without producing the amorphous carbon structure shown at a high methane flow rate of 800 sccm. TEM images are shown two kinds of the synthesized ${\beta}$-SiC NWs structures. One is shown the defect-free ${\beta}$-SiC NWs with a (111) interplane distance of 0.25 nm, and the other is the stacking-faulted ${\beta}$-SiC NWs. Also, TEM images exhibited that two distinct SiC NWs are uniformly covered with $SiO_2$ layer with a thickness of less 2 nm.

• Food Science and Preservation
• /
• v.22 no.1
• /
• pp.63-69
• /
• 2015

The highly producible rice cultivars, hanareum and dasan 2, were prepared and investigated for their physicochemical properties, and the quality characteristics of frozen cookie dough with rice flour according to the thawing time were measured. The water, ash, crude protein, amylose, and damaged starch contents of rice flour, as well as its water holding capacity, particle size, and Hunter color value, were measured. The water, ash, and crude protein contents of the hanareum and dasan 2 rice flours were shown to range from 7.28 to 13.14%, from 0.35 to 0.39, and from 6.05 and 8.68%, respectively. The protein content of the control group was higher than that of hanareum and dasan 2 rice flours. The amylose contents of the hanareum and dasan 2 rice flour were 19.05 and 23.04%, respectively. The damaged starch content and water holding capacity of the control group were lower than those of the hanareum and dasan 2 rice flours. The particle sizes of the samples were $48.54{\sim}50.05{\mu}m$. The lightness values of the hanareum, and dasan 2 rice flour, and of the control were 93.72, 93.51 and 92.63, respectively. The quality characteristics of the gluten-free frozen cookie dough were investigated. The lightness of the cookie made with frozen cookie dough decreased according to the by thawing time, but the diameter of the cookie did not differ significantly. The hardness of the cookie made with rice frozen dasan 2 rice dough was lower than that of the cookie made with frozen hanareum rice dough.