• 한국의류산업학회지
• /
• 제6권1호
• /
• pp.93-101
• /
• 2004

The purpose of this study is to examine consumers' risk perception in internet clothing shopping and its relation with technology readiness and the frequency of purchase. Thereafter, this study examines how consumers' risk perception affect service quality and satisfaction at the apparel shopping sites. An on-line survey was made to collect data, and the replies from 785 people, who had an experience of apparel shopping on line, were used in data analysis. From factor analyses, risk perception comprised 3 factors of product related risk, delivery related risk, and security related risk, and technology readiness comprised 4 factors of optimism, innovativeness, discomfort, and insecurity. Based on cluster analysis, consumers were classified into 3 types in terms of the internet risk perception: low risk group, medium risk group, and high risk group. From path analysis, risk perception was decreased with high frequency of purchase and low discomfort and insecurity of technology readiness, and risk perception and service quality had an influence on consumers' satisfaction with the shopping sites.

• Journal of Welding and Joining
• /
• 제22권6호
• /
• pp.19-24
• /
• 2004

The laser welding and its analysis of thin-sheet carbon steels were carried out with high power $CO_{2}$ laser. The main factor of weld quality of laser welding is gap and edge quality. This work was preformed to focus on the gap tolerance problem during laser welding. First, bead on plate welding of thin sheet was examined to investigate the effect of laser welding variables, and to obtain optimum welding condition. Butt welding was also carried out to show the effect of gap on the laser weldability of thin sheet. In order to investigate the effect of gap on formability of welded thin sheet, LDH test was caried out. At high welding speed, the partial penetration was obtained by low heat input. Otherwise, porosity was formed in the bead at low weld speed because of too much heat input. The optimum welding condition of welding was derived from bead width, penetration and hardness property. The maximum gap tolerance on laser welding was observed to be about 0.2mm. This gap size has good relationship with beam size of laser spot(about 0.3mm). The formability of welded sheet was about $80{\%}$ value of base metal and the gap size has not affected on the formability, although weld quality is dependent on the gap size.

• The International Journal of Costume Culture
• /
• 제3권3호
• /
• pp.235-245
• /
• 2000

The purposes of this study were 1) to investigate usage level of production strategies based on group of production environment, 2) to investigate usage level of production systems based on group of production strategy, and 3) to analyze each of company performance based on group of production strategy and system. For this study, the questionnaires were administered to 215 apparel manufactures in metropolitan area from Feb. to Mar. 1998. Employing a sample of 201, data were analyzed by factor analysis, descriptive statistics, cluster analysis, discriminant analysis, and multivariate analysis of variance. The following are the results of this study. 1. Concerning production strategy due to group of production environment, the stable group and the complicated group prefer to rice/quality centered strategy but the level of usage for strategies is so pretty that it is not significant to carry out them. 2. Concerning production system due to group of production strategy, the workers centered group is occupied high in the price/quality centered group & the complex group. And also the product centered system is occupied high in the flexibility centered group. 3. Concerning company performance due to group of production strategy and system, the price/quality centered group holds low position of performance comparing to another groups. And the performance of the managers centered group is higher than that of the workers.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 춘계종합학술대회
• /
• pp.133-138
• /
• 2001

가입자 Loop 대다수를 차지하는 동선케이블을 이용한 고속데이터서비스가 증가 발전하고 있는데 가입자선로에서 전송속도에 영향을 미치는 요소는 여러 종류가 있지만 전송로상에서 낙뢰, 전력유도 등 외부 전자기적 환경에 의해 통신회선에 잡음이 발생하고 이리한 잡음은 고속데이터서비스의 전송속도 및 전송품질에 영향을 미치게 된다. 된 연구에서는 가입자 통신회선에서 나타나는 잡음특성을 분석하고, 이를 기반으로 ADSL서비스의 전송품질에 가장 광범위하게 영향을 미치는 잡음을 가입자선로에 주입하여 케이블 거리별 전송속도를 측정하고 전송속도와의 관계를 분석하였다.

• 한국의학물리학회지:의학물리
• /
• 제17권1호
• /
• pp.54-60
• /
• 2006

IAEA TRS-398 프로토콜의 임상적 적용을 위하여 고에너지 광자선에 대한 선질보정인자를 직접 계산으로 결정하였다. 본 계산은 상용의 원통형 전리함 모델 7종(A12, IC70, N23333, N30001, N30006, NE2571, PR06C/G)에 대하여 수행되었다. 본 계산결과와 TRS-398의 자료를 비교할 때 대부분의 전리함 및 선질에서 ${\pm}0.3%$ 이내(최대 ${\pm}0.4%$)로 일치하였다.

• 한국기계가공학회지
• /
• 제20권1호
• /
• pp.57-65
• /
• 2021

With the increased utilization of CAM programs, end-mill processing is most commonly used for machining and metal processing. In particular, hole or shaft machining has high assembly precision, which inevitably leads to high utilization of end mills. However, the analysis of quality characteristics according to the process conditions of end mills is not performed systematically at the site, causing poor quality and productivity. The most influential factor of quality is the runout of the end mill. In this paper, the number of turns of the end mill, number of tool blades, cutting direction, and artificial runout volume were determined to identify the correlation between the epicenter, cylindricality, and surface roughness. Two types of end mills, three levels of runout, three levels of rotational speed, and two cutting directions were considered and 36 rounds of hole processing were conducted. For the analysis of shape characteristics according to the set process variables, the experimental planning method was applied to the measured specimen and the processing characteristics were analyzed according to the runout of the end mill through correlation analysis.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.629-632
• /
• 1998

This paper presents a new and simple technique to realize high Q inductor on low resistivity silicon wafer with 6 $\Omega$.cm. This technique is very compatible with bipolar and CMOS standard silicon process. By forming the deep and narrow trenches on the low resistivity wafer substrate under inductor pattern, oxidizing and filling with undoped polysilicon, the low resistivity silicon wafer acts as high resistivity wafer being suitable for the fabrication of high Q inductor. By using this technique the quality factor (Q) for 8-turn spiral inductor was improved up to max. 10.3 at 2 ㎓ with 3.0 $\mu\textrm{m}$ of metal thickness. The experiment results show that Q on low resistivity silicon wafer with the trench technique have been improved more than 2 times compared to the conventional low resistivity silicon wafer without trenches.

• 한국조경학회지
• /
• 제32권2호
• /
• pp.11-24
• /
• 2004

The purpose of this study is to present data on the human activities responding to the physical environment of ‘Ulsan’s Grand Parks by evaluating user behavior and activity, visiting motivations, and user satisfaction. This study was conducted using multi-methods such as interviews and questionnaires surveys. The main findings of this study can be summarized in six parts as follows: \circled1 Behavior patterns showed that the users visited the park left within 30 minutes and the frequency of visits was 1 or 2 times per week. They spent their time mostly on ‘walking’ and ‘picnicking’. The users visited regardless of the seasons or the day of the week. \circled2 The priorities for improvements were analyzed as follows: the users expressed their demands for ‘shadowing facilities’ like shelters and pergolas because they used these facilities frequently. Also, the users would like an ‘event program’, ‘sign system’ and ‘guide program’. \circled3 Analysis of the the user’s perception of the park showed that they perceive the park as ‘representative source of the landscape and open space in Ulsan and place for making contact with nature. \circled4 In examining the visiting motivations of the users of Ulsan Grand Park, it was revealed that people use the park for ‘time with family and friends’, ‘to escape from city life’, ‘to relieve fatigue. As a result of factor analysis, 4 factors were identified such as ‘physical motive(MF1)’, ‘exploratory motive(MF2)’, ‘social motive(MF3)’ and ‘emotional motive(MF4). \circled5 Park users’ evaluation for park facilities showed that people are satisfied with most of the facilities and especially, they have high level of satisfaction for ‘footpaths’, ‘squares’ and ‘picnicspace’. The evaluation of the park user’s of activity reveals that they are content with nearly all the variables. Especially, they have high level of satisfaction for the variables of ‘convenience for dynamic activities’, ‘making of a beautiful atmosphere, ‘accessibility from the outside’ and, ‘convenience in group activitie. Factor analysis of the park user’s of activity revealed 5 factors such as ‘convenience and interest factor (AF1)’, ‘park maintenance, management and use program(AF2)’, ‘visual beauty(AF3)’, ‘safety and accessibility(AF4)’ and ‘crowding(AF5)’. \circled6 Regression analysis was employed to get the predictor factors of overall satisfaction with a result of 60.0%($R^2$). The variance was explained as ‘quality of the picnic space’, ‘convenience and interest factor while using the park’, ‘park program for maintain and management in the park’, ‘visually beauty while using the park’, ‘safety and accessibility of the parks’, ‘quality of the pond’, ‘crowding’, ‘quality of the square’.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권5호
• /
• pp.283-288
• /
• 2000

In this work, small-size, high-performance simple solenoid-type RF chip inductors utilizing an Al2O3 core material were investigated. Copper (Cu) wire with $40\mum$ diameter was used as the coils and the size of the chip inductor fabricated in this work was $2.1mm\times1.5mm\times1.0mm$. The external current source was applied after bonding Cu coil leads to gold pads electro-plated on each end of backsides of a core material. High frequency characteristics of the inductance (L), quality factor (Q), and impedance (Z) of developed inductors were measured using an RF Impedance/Material Analyzer (HP4291B with HP16193A test fixture). This HP4291B was also used to obtain the equivalent circuit and its circuit parameters of the chip inductors. This HP4291B was also used to obtain the equivalent circuit and its circuit parameters of the chip inductors. The developed inductors have the self-resonant frequency (SRF) of 1.1 to 3.1 GHz and exhibit L of 22 to 150 nH. The L of the inductors decreases with increasing the SRF. The Z of the inductors has the maximum value at the SRF and the inductors have the quality factor of 70 to 97 in the frequency range of 500 MHz to 1.5 GHz.

• 한국자기학회지
• /
• 제8권4호
• /
• pp.241-248
• /
• 1998

본 연구에서는 micro magnetic device의 제작과 특성 분석을 위하여 고주파수 대역에서 사용가능한 자성체의 개발과 meander형 마이크로 코일의 가공 기술 확립에 그 목적을 두었다. 자성체로서는 DC magnetron reactive sputtering system에 의해 제조된 초 미세결정구조를 갖는 FeTaC, FeTaN막을 사용하였으며, 그 자기적 특성은 다음과 같다. Bs:13~17kG, Hc:0.1~0.2Oe, $\mu$':2000~4000. 전기 도금법에 의해 제작된 Cu코일은 2$\mu$$\Omega$-cm의 비저항을 나타내었으며, 공심형 5turn 언덕터의 경우에는 50nH의 인덕턴스와 700MHz의 공진 주파수 그리고 200MHz에서 30의 성능 지수를 보였다. 또한 meandergudxo의 폐자로 인덕터에서 인덕턴스는 150nH, 공진 주파수는 100MHz, 그리고 성능지수는 10~30 MHz에서 4의 값을 나타내었다.