• 한국입자에어로졸학회지
• /
• 제20권2호
• /
• pp.57-68
• /
• 2024

A silicon carbide (SiC) ceramic filter is an effective component for hot flue gas cleaning because of its high collection efficiency, high thermal shock resistance, and excellent mechanical strength. The effect of molding pressure in the production of SiC granular ceramic filters, on the mechanical strength and filtration performance, was investigated in this work. It was found that the ceramic filters produced at molding pressures less than 20 MPa have low mechanical strength and that this result was caused by weak physical interaction among the ceramic powders due to defects and cracks. On the other hand, the filter quality factor(q_F), which represents filtration performance of filter media, decreased with increasing the molding pressure due to the drastic increase in pressure drop. Ceramic filter performance factor(q_FM), which is the manipulation of maximum mechanical strength and q_F, was introduced to consider both mechanical strength and filtration performance in this study. As a result, molding pressure of 30 MPa was desirable to produce a SiC granular ceramic filter based on q_FM.

• 한국철도학회논문집
• /
• 제17권3호
• /
• pp.157-164
• /
• 2014

판토그래프와 전차선간의 접촉력 특성은 차량에 대한 안정적 전원공급 특성인 집전성능을 평가하는 중요한 지표이다.본 연구에서는 HEMU-430x판토그래프의 동적 접촉력 특성을 속도에 따라 분석하였다. 그 결과 판토그래프의 접촉력 표준편차가 속도에 따라 증가함을 확인하였고, 주파수 분석을 통하여 전차선의 경간이 접촉력에 매우 큰 영향을 미치는 인자임을 확인하였다. 또한 400km/h 이상의 속도에서 안정적인 집전특성을 확보하려면 판토그래프와 가선간의 접촉력 표준편차가 작아져야 한다. 이를 위하여 전차선 장력증가, 판토그래프 집전판 경량화 등의 방안을 적용하였으며, 이에 대한 접촉력 측면에서의 효과를 정량적으로 분석하였다. 또한 개활지와 터널에서의 접촉력 특성의 차이에 대하여서도 주파수 분석을 통해서 분석하였다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제21권1호
• /
• pp.29-34
• /
• 1998

The purpose of simple abdomen erect projection is to see the fluid level which indicates gastrointestinal ileus or free air due to perforation. we do not have to insist on low kVp technique in simple abdomen erect position as long as we can detect the fluid level and free air shadow. Therefore, the author tried to decrease patient dose by high kVp technique and to improve the image quality due to motion artifact by reduction of exposure time. [Methods] Experiment 1. * screen/film SRO1000/HRH * exposure factor : $140\;kvp{\pm}5\;kv$ with added filters, 200 mA, 0.01 sec * phantom : Acryles : 15.0 cm(equivalent to 17 cm body thickness) 17.5 cm(equivalent to 21 cm body thickness) 20.0 cm (equivalent to 25 cm body thickness) With the exposure factor for same film density($D=0.8{\pm}0.1$) and with the materials above, we tried to find out entrance skin dose and gonad dose for both male and female. Experiment 2. Burger's phantom radiography were checked to see whether there was any change of image quality according to the kVp and the added filters. Experiment 3. Using rotating meter(self made), we examined the motion artifact and the exposure time limitation. [Results and conculution] 1. Using high voltage technique of 140 kVp with added filter, Skin dose, testicle dose and ovary dose decrease to 89.3%, 47% and 71.4% respectively compare to 70 kVp technique, 2. No great changes of Burger's phantom image has detected as from 70 kVp to 140 kVp and the air hole size of Burger's phantom over 0.028 cc(Diameter 3 mm, hight 4 mm) can be distinghished. 3. 0.01 sec(1 pulse) exposure time is possible in the single phase full wave rectification that why we can quitely reduce the unsharness caused by patient's movement.

• Asian-Australasian Journal of Animal Sciences
• /
• 제11권5호
• /
• pp.463-469
• /
• 1998

Factor analysis was applied as a multivariate statistical technique to official genetic evaluations of type classification traits for 1,265,785 Holstein cows and 10,321 sires computed from data collected between August 1982 and June 1994 in Canada. Type traits included eighteen linear descriptive traits and eight major score card traits. Principal components of the factor analysis showed that only five factors explain the information of the genetic value of linear descriptive traits for both cows and sires. Factor 1 included traits related to mammary system, like texture, median suspensory, fore attachment, fore teat placement and rear attachment height and width. Factor 2 described stature, size, chest width and pin width. These two factors had a similar pattern for both cows and sires. In constrast, Factor 3 for cows involved only bone-quality, while in addition for sires, Factor 3 included foot angle, rear legs desirability and legs set. Factor 4 for cows related to foot angle, set of rear leg and leg desirability, while Factor 4 related to loin strenth and pin setting for sires. Finally, Factor 5 included loin strength and pin setting for cows and described only pin setting for sires. Two factors only were required to describe score card traits of cows and sires. Factor 1 related to final score, feet and legs, udder traits, mammary system and dairy character, while frame/capacity and rump were described by Factor 2. Communality estimates which determine the proportion of variance of a type trait that is shared with other type traits via the common factor variant were high, the highest ${\geq}$ 80% for final score, stature, size and chest width. Pin width and pin desirability had the lowest communality, 56% and 37%. Results indicated shifts in emphasis over the twelve-year period away from udder traits and dairy character, and towards size, scale and width traits. A new system that computes fmal score from type components has been initiated.

• Design & Manufacturing
• /
• 제13권2호
• /
• pp.37-43
• /
• 2019

This study conducted a research as to condensation heat transfer friction loss headby using three types of flat micro multi-channel tubes with different processing of micro-fin and number of channels inside the pipes and different sizes of appearances. In addition, identical studies were conducted by using smoothing circular tubes with 5mm external diameter to study heat enhancement factor and pressure drop penalty factor. 1) The friction head loss showed an increase as the vapor quality and mass flux increased. In case of saturation temperature, it shows an increase as it gets lower. These factors are the reason occurring as the lower the saturation temperature is, the higher the density of refrigerant vapor gets. The influence of heat flux is similar as the dryness is low, but as it gets higher, it lowers in heat flux, and as the high temperature of high heat flux, it is a factor that occurs as the density gets lower. 2) RMS error of the in case of friction head loss, it showed to be predicted as 0.45~0.67 by Chisholm, Friedel, Lockhart and Martinelli. 3) As forfriction head loss penalty factor, the smaller the aspect ratio is, the larger the penalty factor gets, and as for the effect of micro-fin, the penalty factor increased because it decreases to the gas fluid the way groove for the refrigerant's flow.

• 방송공학회논문지
• /
• 제20권5호
• /
• pp.667-675
• /
• 2015

고화질, 고품질 방송에 대한 관심이 크게 증가하면서 영상 신호 뿐만 아니라 음향 신호의 고품질화를 요구하는 목소리도 높아지고 있다. 음향 신호의 고품질화에 기여하는 요소 중 하나는 가령, 10.2채널, 22.2채널 등과 같은 재생 채널 수의 확장이지만 이는 많은 수의 스피커를 설치해야만 하는 문제점이 발생한다. 이와 같은 문제를 해결하기 위한 한 가지 방법으로 전방 스피커 어레이를 통한 입체 음향 재생 방식을 들 수 있는데 본 논문에서는 스피커 어레이 기반 음장 재생 방식인 음장합성 기술 (Wave Field Synthesis, WFS)에 대한 소개 및 이론적인 분석을 하고 이 기술로 구현한 전방 스피커 어레이 시스템의 입체 음향 재현 성능을 확인하기 위한 주관 청취 평가 결과를 제시한다. 결론적으로, WFS에 기반한 전방 스피커 어레이 재생 방식이 디스크리트 5.1채널 재생 방식과 비교하여 만족스러운 음장감을 제공한다는 것을 알 수 있었다.

• 한국의류산업학회지
• /
• 제11권3호
• /
• pp.390-398
• /
• 2009

The research purposes are (1) to identify male market segmentation based on fashion involvement, (2) to compare purchase intention of clothing items and store attribute evaluation at two different retail formats, department store and internet shopping mall, and (3) to compare the influence of store attributes on intention to purchase fashion products at two retail formats among segments. The data are collected from 275 male consumers through internet research institute. The major results of this study are as follows. First, the dimensions of fashion involvement are identified into external involvement and internal involvement. Male respondents present high mean scores on external involvement items, emphasizing social roles of clothing. Two involvement factors generate three market segments: high involvement group(32.4%), external involvement group(44%), and low involvement group(23.6%). Second, high involvement group shows higher mean scores on purchase intention of seven clothing items than low involvement group. Third, department store attributes are identified into four factors, product assortment, quality per price, service, and symbolic image, while internet shopping mall includes assortment & convenience, quality per price, and symbolic image. High involvement group again presents higher mean scores on each retail attribute factor than low involvement group. Finally, quality per price is the most significant variable to explain the purchase intention at department store among three market segment, whereas assortment & convenience and quality per price are important predictors to increase purchase intention at internet shopping mall. However, relative importance of each attribute variable is different among three involvement groups.

• 한국의류학회지
• /
• 제28권6호
• /
• pp.723-733
• /
• 2004

This study was designed to find out the effects of country-of-origin and price on the perceived quality, perceived value and purchase willingness of t-shirt products. This study will allow marketers to find the target consumers and to choose both the suitable country -of -origin and the reasonable selling price. This study was based on theoretical and empirical methods. For the empirical methodology, 3${\times}$3 between subjects factorial design with country-of-origin (U.S.A. vs. Korea vs. China) and price(high price vs. middle price vs. low price) was used. The nine types surveys by country-of-origin and price were transmitted to 960 undergraduate and graduate school students in Seoul. A total of 912 questionnaires were used in the final statistical analyses using factor analysis, MANOVA, Duncan test, and Tukey test. The results of this study were as follows: First, in the case of the perceived quality, participants evaluated t-shirt products better when the origin is U.S.A. followed by Korea and China in the order. Second, price affected the perceived value and purchase willingness. In the perceived value and purchase willingness, low priced t-shirt products were evaluated higher than the middle and high priced ones. Third, in the perceived quality, high priced Korean t-shirt products were evaluated lower than high and middle priced American t-shin products. In the perceived value, low priced Chinese t-shirt products were evaluated lower than middle priced Korean t-shirt products. In the purchase willingness, low priced American and low priced Korean t-shirt products and middle priced Korean t-shirt products were evaluated higher than all priced Chinese t-shirt products.

• 한국표면공학회지
• /
• 제44권1호
• /
• pp.21-25
• /
• 2011

This test focuses on the correlation between the lubrication, ductility and strength through the change of nut lubricant which decides joining angle for A490 bolt sets required in the AASHTO (American Association of State Highway & Transportation Officials). Because the lubrication of high tension bolt, nut, washer sets becomes an important factor to ductility and joining load, the quality improvement is required for improving reliability and securing enough lubrication of maker and user. This study examines the quality characteristics required in the specification through tests because only this standard specifies joining quality in the extreme conditions (as much about two times of the joining angle on site as normal condition). Moreover, this study is limited to the test on joining axial force required in the AASHTO for the three nut lubrication conditions of A490 bolt set. It is concluded that the nuts should be coated or waxed enough for the improvement of the joining axial force and ductility of bolts required in the standards. It is shown that in the case of plain high tension bolt sets, a rust preventing lubricative oil shall be applied and the torque coefficient value for A490 bolt sets should be maintained below 0.175.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.301-306
• /
• 1998

Aggregate as the component of High Flowing Concrete has much influence on the properties of High Flowing Concrete according to the quality and condition because the aggregate occupy a lot of concrete volume. The shape and size of aggregate affect a lot spatial passibility and fillingability. The segregation is easy to occur when the rate of Fine aggregate is high so that Fluidity is much affected by aggregate factor. In this study, therefore, we try to understand the various fluidity according to the fine aggregate of standard grade rang, the size of Coarse aggregate and the rate of fine aggregate to confirm the manufacturing possibility of High Flowing Concrete by examination on the influence of fresh state of high flowing concrete such as flowability, reinforcement passibility, fillingability, segregation resistance.