• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.10a
• /
• pp.265-271
• /
• 1998

High temperature wear behavior of plasma sprayed zirconia based coating sealing with zirconia sol were investigated for high temperature wear resistance application. The zirconia powders containing 2.5, 5.0, 7.5, 10.0 mol% of MoS$_2$, $Fe_2O_3$ for plasma spray were made by spray drying method. As-sprayed coating was sealed by zirconia-sol to fill up the pore and crack in coating. wear test were performed at temperature ranges from room temperature to 600$\circ$C. The microstructural changes of before and after sealing process were examined by SEM, XRD and EPMA. After sealing process, the porosity was decreased and micro-hardness was increased. The wear properties of coating after sealing process were improved by sealing of pores and cracks. The behavior of wear amount and coefficient of friction were same tendency to before sealing process.

• Journal of the Korean Society of Tobacco Science
• /
• v.5 no.2
• /
• pp.77-82
• /
• 1983

The ventilation of cigarette samples made by the combination of various acetate tow denier and porous plug wrapping paper have been investigated The ventilation rate increased no longer in the acetate tow with high mono denier and low total denier but changed slightly in that with low mono denier and high total denier when the porosity of plug wrapping paper was more than 6500cm/min. cbar. Tip pressure drop ratio, Y, was significantly influenced by tip ventilation rate, X. i. e., Y = 1.0880-0.0042x The relationships of ventilation rate, $X_v$. and smoke delivery, Y, were as follows; Tar : $Y_r$= -14.0458-0.1650$X_v$ Nicotine : $Y_N$= - 1.1045-0.0125$X_v$ CO : $Y_{co}$=17.2806-0.2090$X_v$

• Proceedings of the KWS Conference
• /
• 2003.05a
• /
• pp.84-86
• /
• 2003

The laser welding and its analysis of thin-sheet carbon steels were carried out with high power CO$_2$1aser. Bead on plate welding of thin sheet was examined to investigate the effect of weld variables of laser welding, and to obtain optimum welding condition. Butt-welding was also carried out to show the effect of gap on the laser weldability of thin sheet. At high welding speed, the partial penetration was obtained by low heat input. Otherwise, porosity was formed in the bead at low weld speed because of too many heat input. The maximum gap tolerance on laser welding was observed to be about 0.2mm. This gap size has good relationship with beam size of laser spot(about 0.3mm). The formability of welded sheet was about 80% value of base metal and the gap size has not affected on the formability, although weld quality is dependent on the gap size.

• Journal of the Korean Ceramic Society
• /
• v.31 no.3
• /
• pp.330-336
• /
• 1994

High strength cement composites (W/C=0.1) were prepared by using various blending materials such as SiC whisker and white carbon (hydrated silica: SiO2·nH2O). The effect of various blending materials on the microstructure and strength of the hardened cement paste were investigated in the view of fracture mechanics. The plain specimen showed 101 MPa of flexural strength, 81 GPa of Young's modulus and 1.32 MPam1/2 of fracture toughness. When the blending materials were added to the composites, their values were enhanced to about 110∼138 MPa, 95∼146 GPa and 1.32∼1.87MPam1/2 respectively. The improvement of the mechanical strength for the hardened cement paste may be due to the removal of macropores, the reduction of total porosity, pozzolanic reaction and the increase of various fracture toughening effect.

• International Journal of High-Rise Buildings
• /
• v.4 no.2
• /
• pp.135-142
• /
• 2015

As the skyscraper matures as a building type, its role in actively connecting to, and reinforcing, major threads of urban fabric becomes increasingly more important. The creation of public spaces inside of and adjacent to tall buildings allows for significant additions to the public realm, facilitating better connections between varied uses, providing needed access to critical transportation functions. In this more integrated version of the tall building type, the density afforded by a vertical structure is complemented by strategically devised porosity of plan and section. This paper examines three major tower projects which exemplify a progressive approach to permeable design: the recently completed Jingan Kerry Centre in Shanghai, the Lotte Supertower in Seoul, now half completed, and the One Vanderbilt tower being proposed next to Grand Central Terminal in New York City. These projects suggest possibilities for innovative approaches to private development strategies, public planning processes, and architectural design.

• Journal of Powder Materials
• /
• v.10 no.3
• /
• pp.168-171
• /
• 2003

Interpenetrating phase composites of $TiB_2$-Cu system were produced via Spark-Plasma Sintering (SPS) oi nanocomposite powders. Under simultaneous action of pressure, temperature and electric current titanium diboride nanoparticles distributed in copper matrix move, agglomerate and form a fine-grained skeleton. Increasing SPS-temperature and he]ding time promote densification due to local melting of copper matrix When copper melting is avoided the compacts contain 17-20% porosity but titanium diboride skeleton is still formed representing the feature of SPS . High degree of densification and formation of titanium diboride network result in increased hardness of high-temperature SPS-compacts.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.23-24
• /
• 2015

As this study is an experiment for solving problem on the carbonation acceleration of high volume admixture concrete, the capillary pore getting filled up by saponification as cooking oil gets absorbed to the concrete surface in case of applying a cooking oil based coating agent to the concrete has been verified in the previous studies. Accordingly, this study has performed a comparative experiment on the cooking oil and the anticorrosive coating agent sold on the market while the result followed by this experiment has shown the fact of indicating similar carbonation penetration depth and porosity.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.10
• /
• pp.1437-1443
• /
• 2003

Thermal decomposition of hydrated surface layer of $Mg(OH)_2$ at $500^{\circ}C$ in vacuum turned non-porous MgO into porous one with high surface area of around $270 m^2$/g. Most of its surface area, 74 %, was from micropores, and rest of it was from mesopores in wedge-shaped slits, exhibiting bimodal size distribution centered around 30 and 90${\AA}$. Rehydration followed by subsequent dehydration at $300 ^{\circ}C$ in dynamic vacuum further raised the surface area to 340 $m^2$/g. Fraction of microporous surface area was increased to 93%, and the shape of the mesopores was modified into parallel slits with a specific dimension of 32 ${\AA}$. Application of $Fe_2O_3$ over MgO via iron complex formation did not alter the pore characteristics of MgO core, except slightly increased pore dimension. Over the course of the modification, $Fe_2O_3$ stayed on the surface possibly via spill-over reaction.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.12
• /
• pp.2921-2926
• /
• 2009

Cu-BTC[$Cu_3(BTC)_2(H_2O)_3$, BTC = 1,3,5-benzenetricarboxylate], one of the most well-known metal-organic framework materials (MOF), has been synthesized under atmospheric pressure and room temperature by using ultrasound. The Cu-BTC can be obtained in 1 min in the presence of DMF (N,N-dimethylformamide), suggesting the possibility of continuous production of Cu-BTC. Moreover, the surface area and pore volume show that the concentration of DMF is important for the synthesis of Cu-BTC having high porosity. The morphology and phase also depend on the concentration of DMF : Cu-BTC cannot be obtained at room temperature in the absence of DMF and aggregated Cu-BTC (with low surface area) is produced in the presence of high concentration of DMF. It seems that the deprotonation of benzenetricarboxylic acid by base (such as DMF) is inevitable for the room temperature syntheses.

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.110-116
• /
• 2003

We have developed a high performance powder, which has a quenching efficacy not only for short-chain fatty acids and amines, but also for vinyl ketones (l-octen-3-one, cis-l,5-octadien-3-one), newly found as other key compounds in axillary malodor. By investigating various powders known to have a quenching efficacy, we finally developed a highly porous silica bead containing magnesium oxide. We found that the superior deodorant effect performed by this powder was the result of multiple effects due to both an excellent physical adsorption capability from its high porosity and a specific adsorption of vinyl ketones by magnesium in the powder. An antiperspirant formulation containing both this powder and a Morus alba extract showed good efficacy as a deodorant.