• 대한기계학회논문집A
• /
• 제40권9호
• /
• pp.791-799
• /
• 2016

최근 기계 시스템의 고속화가 진행됨에 따라 구조물 및 기계부품의 신뢰성 및 안전성 확보 측면에서, 충격하중하에서 구조용 재료의 동적변형거동에 대한 평가가 필요하다. 그러나 $10^4\;s^{-1}$를 넘는 고 변형률속도에서 실험적 기법을 사용한 구조용 재료의 변형거동의 파악은 용이하지 않은 실정이다. 본 연구에서는, 고 변형률속도역에서 금속재료의 동적변형거동을 조사하기 위해 Taylor 봉 충격시험을 실시하였다. 또한 고속영상촬영 시스템을 사용하여 Taylor 봉 충격시험 동안 변형거동을 관찰하였다. Taylor 봉 충격시, 경과시간에 따른 변형과정을 AUTODYN 상용 S/W를 사용한 수치해석을 수행하여 실험결과와 비교하여 고 변형률속도역에서 거동을 평가하였다.

• 한국해양공학회지
• /
• 제25권3호
• /
• pp.73-84
• /
• 2011

This is the fifth in a series of companion papers dealing with the dynamic hardening properties of various marine structural steels at intermediate strain rates. Five steps of strain rate levels (0.001, 1, 10, 100, 200/s) and three steps of temperature levels (LT ($-40^{\circ}C$), RT, and HT ($200^{\circ}C$)) were taken into account for the dynamic tensile tests of three types of marine structural steels: API 2W50 and Classifications EH36 and DH36. The total number of specimens was 180 pieces. It was seen that the effects of dynamic hardening became clearer at LT than at RT. Dynamic strain aging accompanying serrated flow stress curves was also observed from high temperature tests for all kinds of steels. The dynamic hardening factors (DHFs) at the two temperature levels of LT and RT were derived at the three plastic strain levels of 0.05, 0.10, 0.15 from dynamic tensile tests. Meanwhile, no DHFs were found for the high temperature tests because a slight negative strain rate dependency due to dynamic strain aging had occurred. A new formulation to determine material constant D in a Cowper-Symonds constitutive equation is provided as a function of the plastic strain rate, as well as the plastic strain level. The proposed formula is verified by comparing with test flow stress curves, not only at intermediate strain rate ranges but also at high strain rate ranges.

• 한국통신학회논문지
• /
• 제38A권11호
• /
• pp.919-927
• /
• 2013

본 논문에서는 HDR (high dynamic range) 영상 렌더링을 위한 히스토그램 변형 기법을 이용한 인지기반 톤 맵핑(tone mapping) 기법을 제안한다. HDR 톤 맵핑 알고리듬은 넓은 동적 영역을 갖는 영상을 LDR (low dynamic range) 영상 장치에 표현하기 위해 사용된다. 인간의 시각특성을 이용한 톤 맵핑 알고리듬은 상당히 효과적이지만 고정된 형태의 맵핑 함수를 사용하기 때문에 모든 영상에서 동일한 성능을 얻지 못한다. 제안하는 방법은 인지기반 톤 맵핑 함수와 히스토그램 변형기법을 적용하여 HDR 영상의 동적 영역을 압축한다. 인지기반 톤 맵핑 함수를 이용해서 원 영상의 히스토그램을 제한하고 보상과정을 통해서 적응적인 톤 맵핑 함수를 얻을 수 있다. 이는 화소값에 따라 서로 다른 제약조건들을 사용함으로써 contrast를 향상시킬 뿐만 아니라 원 영상의 디테일도 보존한다. 또한, 히스토그램 변형기법을 사용함으로써 과도한 히스토그램 평활화로 인한 왜곡을 개선할 수 있고, 더욱이 제어파라미터를 이용하여 영상의 contrast를 조정할 수 있다. 시뮬레이션 및 실험을 통해 주관적 및 객관적 성능을 비교하고 기존 방법에 비해 제안한 방법이 우수함을 입증한다.

• 한국지반환경공학회 논문집
• /
• 제20권10호
• /
• pp.5-14
• /
• 2019

최근 우리나라에서도 지진이 발생하여 대도시의 초고층 건물의 내진안정성에 대한 관심이 높아져 이에 대한 연구가 증가하고 있다. 또한 대부분의 내진설계 및 해석은 지반을 간접적으로 고려하고 있고, 3D 동적해석을 이용한 내진해석 연구는 미비한 실정이다. 따라서 본 연구에서는 지반을 포함한 SSI 연속체 모델에 기초한 2D 및 3D 동적해석을 수행하고 거동을 비교 분석하였다. 동적해석을 위해 지반범용해석 프로그램인 MIDAS GTS NX를 이용하여 선형시간이력해석을 수행하였다. 이를 위해 초고층 건물이 기반암 위에 시공되고 표층에 묻혀있는 것으로 가정하고, 선정된 파라미터를 기준으로 민감도 분석을 수행하였다. 동적거동은 수평변위, 층간변위비, 휨응력, 취약부를 이용하여 비교 분석하였다. 대부분의 경우, 2D 동적거동은 3D보다 크게 산출하여 더 보수적인 결과를 보였으며, 취약부의 수와 크기는 증가하는 것으로 나타났다.

• 한국정밀공학회지
• /
• 제32권8호
• /
• pp.713-718
• /
• 2015

This article describes the calculation procedure for the dynamic characteristics of a high-pressure labyrinth seal wherein the friction force and rotor whirling force are considered; SFCP, the commercial code developed by Lee and two colleagues, is used in the procedure. The simulation results were reviewed in comparison to those of the experiments provided by Benckert; additionally, the SFCP simulation results were verified using the CFD analysis presented by Toshio Hirano. This calculation procedure may therefore be applied to the dynamic characteristics of the labyrinth seals of high-pressure turbo machinery.

• 한국정밀공학회지
• /
• 제22권1호
• /
• pp.160-166
• /
• 2005

In this paper, the combined system equation of motion, which can analyze the dynamic interaction between pantograph and catenary system, is derived by adopting absolute nodal coordinates and rigid body coordinates. The analysis results are compared with real experiment data from test running of Korean high-speed train (HSR 350x). In addition, a computation method for the dynamic stress of contact wire is presented using the derived system equation of motion. This method might be good example and significant in that the structural and multibody dynamics model can be unified into one numerical system.

• 방송공학회논문지
• /
• 제14권4호
• /
• pp.428-437
• /
• 2009

A high dynamic range (HDR) image can represent real world scenes that have a wide range of luminance intensity. However, compared with the range of real world luminance, conventional display devices have a low dynamic range (LDR). To display HDR images onto conventional displayable devices such as monitors and printers, we propose the logarithmic based global reproduction algorithm that considers the features of the image using reproduction parameters. Based on the characteristics of the image, we first modify the input luminance values for reproducing perceptually tuned images and then obtain the displayable output values directly. The experimental results show that the proposed algorithm achieves good subjective results while preserving details of the image; furthermore, the proposed algorithm has a fast, simple and practical structure for implementation.

• 한국철도학회논문집
• /
• 제5권1호
• /
• pp.10-17
• /
• 2002

In this study, we have developed the static and dynamic simulation program of a high speed current collection system. The catenary wire is modeled to discrete masses connected by massless strings and the pantograph is replaced with 3 d.o.f equivalent models that are composed of masses, springs and dampers. We derived partial differential equations of motion from the equivalent model and developed the simulation program. Then, we calculated the static equilibrium state of the overhead catenary and the dynamic behaviors of the high speed current collection system. The analysis results were compared with the results of GASENDO software developed at RTRI in Japan.

• International Journal of Fluid Machinery and Systems
• /
• 제4권2호
• /
• pp.289-306
• /
• 2011

In the development of very high head pumped storage projects, one of the critical problems is the strength of pumpturbine runners. Data obtained by stress measurements of high head pump-turbine runners indicated that dynamic stress due to the vibration of runner might be detrimental, possibly to cause fatigue failure, if the runner were designed without proper consideration on its dynamic behaviour. Numerous field stress measurements of runners and model tests conducted with hydrodynamic similarity revealed that the hydraulic excitation force developed by the interference of rotating runner blades with guide vane wakes sometimes would induce such heavy vibration of runner. Theoretical and experimental investigations on both the hydraulic excitation force and the natural frequencies of runner have been conducted to explore this forced vibration problem.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.494-499
• /
• 2003

This paper concerns the static, dynamic and thermal characteristics analysis of a high-speed spindle system for horizontal machining centers with 45mm x50,000rpm. The spindle system is designed based on the angular contact ceramic ball bearings, built-in motor, oil-air lubrication method and oil jacket cooling method. The structural and thermal analysis models of spindle system are constructed by the finite element method. The static and dynamic characteristics are estimated based on the static deformation, modal parameter, mode shape and frequency response function, and the thermal characteristics are estimated based on the temperature rise, temperature distribution and thermal deformation. The analysis results illustrate that the designed spindle system has excellent structural and thermal stabilities