• 한국포장학회지
• /
• 제19권2호
• /
• pp.95-102
• /
• 2013

고밀도 폴리에틸렌(High density polyethylene, HDPE)을 수분에 민감한 전기전자제품, 의약품 등을 위한 하이배리어 패키징 소재로써 적용하기 위해서 높은 가로세로비(High aspect ratio)를 가진 Exfoliated graphite (이하 EFG)를 필러로 도입하였다. 또한, 효과적인 분산성과 혼화성을 위해서 상용화제를 첨가하여 HDPE/EFG 나노복합필름을 제조하였다. HDPE/EFG 나노복합필름의 EFG 함량에 따른 화학적 특성, 모폴로지(Morphology), 열적 특성 및 수분차단 특성을 조사하였다. HDPE와 EFG 사이에 화학적 결합이나 상호작용이 약하지만, EFG를 첨가함에 따라 수증기 투과도는 127에서 78 (70 ${\mu}m{\cdot}g/m^2$, $day{\cdot}atm$)까지 감소되었다. 특히, HDPE/EFG 나노복합필름은 EFG의 함량이 0.5%일 때 가장 효과적이며, 그 이상의 함량에서는 물성이 향상되지 않았다. 따라서, 물성의 극대화를 위해서는 EFG의 분산성 향상 및 HDPE와 EFG의 화학적 결합 등의 혼화성 개선에 관한 추가적인 연구가 필요하다.

• Nuclear Engineering and Technology
• /
• 제33권2호
• /
• pp.184-191
• /
• 2001

The effects of ${\gamma}$-irradiation on the crosslinking of high density polyethylene (HDPE) was investigated for the purpose of obtaining a suitable formulation for heat shrinkable materials. In this study the HDPE specimens were prepared by blending with cross linking agents and pressed into a 0.2 mm sheet at 18$0^{\circ}C$. ${\gamma}$-irradiation was conducted at 40 to 100 kGy in nitrogen. The heat shrinkable property and thermal mechanical property of the HDPE sheets have been investigated. It was found that the degree of crosslinking of the irradiated HDPE samples were increased with irradiation dose. Compared with the HDPE containing triallylisocyanurate, the HDPE containing trimethylol propane triacrylate shows a slight increase in crosslinking density. The heat transformation and dimension change of HDPE decreased with increasing radiation dose. The heat shrinkage of the samples increased with increasing annealing temperatures. The thermal resistance of HDPE increased upon the crosslinking of HDPE.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.52-56
• /
• 2001

Experiments of 2 type on insulating compounds accomplished to change PVC using in URD(Underground) power cable jacketing. one was DB(Dielectric Breakdown) test on the pure base resins and the others were WVT(Water Vapor Transmission) test on the compounds which contained C/B(Carbon Black), anti-oxidant to base resin. a kind of specimens made by pressing to resin of pellet or lump form was HDPE(High Density Polyethylene), MDPE(Medium Density Polyehylene), LDPE(Low Density Polyethylene), LLDPE(Linear Low Density Polyethylene), PVC(Polyvinyl Chloride). As a results of AC DB and WVT test, we saw that strength of Insulation was HDPE> LLDPE = MDP E> LDPE and WVT ratio was HDPE

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 기술교육전문연구회
• /
• pp.149-153
• /
• 2003

In URD(Underground Residential Distribution) power cable, experiments of WVT(Water Vapor Transmission) test on the Base Resin accomplished to specimens which contained CB(Carbon Black), anti-oxidant to base resin and made by pressing to resin of pellet or lump form. a kind of specimens was HDPE(High Density Polyethylene), MDPE(Medium Density Polyethylene), LDPE(Low Density Polyethylene), LLDPE(Linear Low Density Polyethylene), PVC(Polyvinyl Chloride). as a results of WVT test, we saw that WVT ratio was HDPE < LLDPE < MDPE≒LDPE${\ll}$ PVC. WVT properties of PVC using for jacket showed properties 15-20 times more than MDPE or LLDPE. Therefore, to development of watertightness cable, our works present need of Changing in insulating materials.

• 폴리머
• /
• 제31권1호
• /
• pp.25-30
• /
• 2007

재활용 고밀도 폴리에틸렌(HDPE)에 Perbutyl peroxide(PBP)를 첨가하여 반응 용융가공에 의한 가교 특성 및 물성 변화를 살펴보았다. 그 결과, 재활용 HDPE에 포함되어 있는 다양한 이물질의 성분을 EDS를 이용하여 분석하였으며 수지의 재활용 시 포함된 유, 무기물이 가교 반응에 영향을 미침을 확인하였다. 또한 물성 측정을 통해 재활용 가교 HDPE가 신재 HDPE와 비교하여 낮은 밀도, 용융엔탈피 그리고 높은 용융점도를 가짐으로 보아 상대적으로 신재 가교 HDPE에 비하여 가교가 더 잘 일어남을 알 수 있으며 이러한 재활용 HDPE의 가교 특성은 가교에 의한 재환용 HDPE의 기계적 물성 증가에 기여함을 확인하였다.

• 한국가스학회지
• /
• 제18권3호
• /
• pp.31-37
• /
• 2014

본 연구에서는 자료 제공을 목적으로 국내 분진폭발사고에서와 동일한 고밀도 폴리에틸렌(high-density polyethylene, HDPE ) 분진을 사용하여 열분해성과 착화에너지를 실험적으로 조사하였다. 폭발 민감도를 측정하기 위하여 시차주사열량계(differential scanning calorimeter, DSC), 열중량분석기(thermo-gravimetric analysis, TGA) 및 최소착화에너지(minimum ignition energy, MIE) 측정장치를 사용하였다. HDPE의 체적기준 평균입경은 $61.6{\mu}m$가 얻어졌으나, 입자 크기에 따른 입자 수밀도(particle number density) 분석에서는 $0.4{\sim}4{\mu}m$의 미세 입자가 98% 이상의 비율을 갖는 것으로 나타났다. TGA 및 DSC 측정결과로부터 HDPE는 $380{\sim}490^{\circ}C$의 온도 구간에서 발화가 일어날 수 있음을 알 수 있었고, MIE는 $1200{\sim}1800g/m^3$의 HDPE의 농도 범위에서 1 mJ 이하로 측정되었는데, 이는 입자 수밀도 기준에 따른 $0.4{\sim}4{\mu}m$의 미세 입자의 비율(98 %)이 매우 높았던 것이 원인으로 판단된다.

• 폴리머
• /
• 제27권4호
• /
• pp.307-312
• /
• 2003

고밀도 폴리에틸렌 (HDPE)과 초고분자량 폴리에틸렌 (UHMWPE)을 혼합하여 중공사막을 제조하고, 이의 형태구조와 물성 변화를 조사하였다. 분자량 측정과 FT-IR을 이용한 분석 결과, 상품화된 중공사막(Sterapore)은 고분자량의 HDPE로 제조되었으며, 표면은 친수성 고분자인 비닐 알코올/비닐 아세테이트 공중합체로 코팅되어 높은 수투과도를 갖는 이유를 규명하였다. HDPE/UHMWPE 블렌드에서 UHMWPE의 혼합 한계 조성비는 10 wt% 이하이며, UHMWPE의 분산성을 높이기 위하여 혼합과정에서 광유를 도입하여야 할 것으로 판단되었다. 제조된 HDPE/UHMWPE 블렌드 중공사의 기계적 물성과 막 구조는 Sterapore와 유사하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.52-56
• /
• 2001

Experiments of 2 type on insulating compounds accomplished to change PVC using in URD(Underground) power cable jacketing. one was DB (Dielectric Breakdown) test on the pure base resins and the others were WVT(Water Vapor Transmission) test on the compounds which contained C/B(Carbon Black), anti-oxidant to base resin. a kind of specimens made by pressing to resin of pellet or lump form was HDPE(High Density Polyethylene), MDPE(Medium Density Polyehylene), LDPE(Low Density Polyethylene), LLDPE(Linear Low Density Polyethylene), PVC (Polyvinyl Chloride). As a results of AC DB and WVT test, we saw that strength of Insulation was HDPE > LLDPE ≒ MDPE > LDPE and WVT ratio was HDPE < LLDPE < MDPE < LLDPE ≒ LDPE${\ll}$PVC. WVT of PVC using for jacket showed characteristic 15 times more than MDPE or LLDPE. Therefore, to development of watertightness cable, our works present need of Changing in insulating materials

• Journal of Welding and Joining
• /
• 제31권6호
• /
• pp.1-7
• /
• 2013

In nuclear power plants, lined carbon steel pipes or PCCPs (pre-stressed concrete cylinder pipes) have been widely used for sea water transport systems. However, de-bonding of linings and oxidation of PCCP could make problems in aged NPPs (nuclear power plants). Recently at several NPPs in the United States, the PCCPs or lined carbon steel pipes of the sea water or raw water system have been replaced with HDPE (high density polyethylene) pipes, which have outstanding resistance to oxidation and seismic loading. ASME B&PV Code committee developed Code Case N-755, which describes rules for the construction of buried Safety Class 3 polyethylene pressure piping systems. Although US NRC permitted HDPE materials for Class 3 buried piping, their permission was limited to only 10-year operation because of several concerns including the quality of fusion zone of HDPE. In this study, various requirements for fusion qualification test of HDPE and some regulatory issues raised during HDPE application review in foreign NPPs are introduced.

• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.1004-1012
• /
• 2021

High density polyethylene (HDPE) pipe has many advantages over metallic pipe, and has been used in non-safety related application for years in some nuclear power plants (NPPs). Recently, HDPE pipe was introduced into safety related applications. The main difference between safety-related and non-safety-related pipes in NPPs is the design method of extra loadings such as gravity, temperature, and earthquake. In this paper, the mechanical behavior of HDPE pipe under various loads in pipe gallery was studied by finite element analysis (FEA). Stress concentrations were found at the fusion regions on inner surface of mitered elbows of HDPE pipe system. The effects of various factors were analyzed, and the influence of various loads on the damage of HDPE pipe system were evaluated. The results of this paper provide a reference for the design of nuclear safety-related Class 3 HDPE pipe. In addition, as the HDPE pipes analyzed in this paper were suspended in pipe gallery, it can also serve as a supplementary reference for current ASME standard on Class 3 HDPE pipe, which only covers the application for buried pipe application.