• 농업생명과학연구
• /
• 제45권3호
• /
• pp.1-7
• /
• 2011

본 연구는 울릉도 나리분지의 군락구조와 환경요인의 상관관계를 파악하여 산림식생의 보전 및 관리에 필요한 생태학적 기초자료를 제공하기 위하여 수행되었다. 나리분지의 산림군락은 너도밤나무군락, 당마가목군락, 소나무군락, 풍게나무군락, 두메오리나무군락으로 분류되었다. DCCA 분석 결과, 환경요인 중 해발이 군집의 분포에 영향을 미치는 인자인 것으로 나타났다. 너도밤나무군락과 당마가목군락은 방위, Na, C/N의 환경요인과 군락단위의 분포지가 높은 상관관계를 나타내었다. 풍게나무군락은 Ca, K 등과 상관관계가 높은 것으로 나타났으며, 두메오리나무군락은 CEC의 함량이 높은 입지에 분포하고 있었으며, 해발고와 높은 상관관계가 있었다. 소나무군락은 Ca, CEC의 함량이 높은 입지에 분포하는 것으로 나타났다.

• 한국재료학회지
• /
• 제22권4호
• /
• pp.202-206
• /
• 2012

$CoSi_2$ was formed through annealing of atomic layer deposition Co thin films. Co ALD was carried out using bis(N,N'-diisopropylacetamidinato) cobalt ($Co(iPr-AMD)_2$) as a precursor and $NH_3$ as a reactant; this reaction produced a highly conformal Co film with low resistivity ($50\;{\mu}{\Omega}cm$). To prevent oxygen contamination, $ex-situ$ sputtered Ti and $in-situ$ ALD Ru were used as capping layers, and the silicide formation prepared by rapid thermal annealing (RTA) was used for comparison. Ru ALD was carried out with (Dimethylcyclopendienyl)(Ethylcyclopentadienyl) Ruthenium ((DMPD)(EtCp)Ru) and $O_2$ as a precursor and reactant, respectively; the resulting material has good conformality of as much as 90% in structure of high aspect ratio. X-ray diffraction showed that $CoSi_2$ was in a poly-crystalline state and formed at over $800^{\circ}C$ of annealing temperature for both cases. To investigate the as-deposited and annealed sample with each capping layer, high resolution scanning transmission electron microscopy (STEM) was employed with electron energy loss spectroscopy (EELS). After annealing, in the case of the Ti capping layer, $CoSi_2$ about 40 nm thick was formed while the $SiO_x$ interlayer, which is the native oxide, became thinner due to oxygen scavenging property of Ti. Although Si diffusion toward the outside occurred in the Ru capping layer case, and the Ru layer was not as good as the sputtered Ti layer, in terms of the lack of scavenging oxygen, the Ru layer prepared by the ALD process, with high conformality, acted as a capping layer, resulting in the prevention of oxidation and the formation of $CoSi_2$.

• Wind and Structures
• /
• 제26권5호
• /
• pp.267-277
• /
• 2018

Numerical simulations are performed of a long flexible cylinder undergoing vortex-induced vibration at a Reynolds number of 500. The cylinder is pinned at both ends, having an aspect ratio of 100 (cylinder length to cylinder diameter) and a mass ratio of 4.2 (structural mass to displaced fluid mass). Temporal and spatial information on the cross-flow (CF) and in-line (IL) vibrations is extracted. High modal vibrations up to the $6^{th}$ in the CF direction and the $11^{th}$ in the IL direction are observed. Both the CF and IL vibrations feature a multi-mode mixed pattern. Mode competition is observed. The $2^{nd}$ mode with a low frequency dominates the IL vibration and its existence is attributed to a wave group propagating back and forth along the span. Distributions of fluid force coefficients are correlated to those of the CF and IL vibrations along the span. Histograms of the x'-y motion phase difference are evaluated from the total simulation time and a complete vibration cycle representing the standing or travelling wave pattern. Correlations between the phase difference and the vibrations are discussed. Vortex structures behind the cylinder show an interwoven near-wake pattern when the standing wave pattern dominates, but an oblique near-wake pattern when the travelling wave pattern prevails.

• 전기학회논문지P
• /
• 제66권4호
• /
• pp.242-246
• /
• 2017

In this study, it was investigated about optical simulation in high brightness and high uniformity general lighting using glass light guide plate. And we adopt edge-light emission type light plate. Edge-light type lighting has been used LCD application, especially note PC or smart phone backlight unit. Because it had the good properties such as slim shape and light weight. We thought this type was suitable for general lighting application such as wall attached type or ceiling mount type. But many of edge-light type lighting had problems. It called slanted output light rays. That was main key parameter how could control the direction of output light rays. We investigated the solution of this problems, using ray tracing method, we recognized the major fact of the solution relied on the geometric structure of diffusing dot shape. We set the conditions of aspect ratio in diffusing dot shape such as 0.5 to 1. And, at first, we designed diffusing dots shape based on the results of optical simulation and made specimen. as above condition, and acquired good result in confirming dots shape such as the value of the output rays's peak angle was around 75 degrees. And good light distribution characteristics were measured by slated spectro-radiometer. It was shown that the effective ways of designing light distribution characteristics using optical simulation such as ray tracing linear method for making general lighting using glass light guide plate.

• 한국재료학회지
• /
• 제20권7호
• /
• pp.370-373
• /
• 2010

In fabricating plasma display panels, the photolithographic process is used to form patterns of barrier ribs with high accuracy and high aspect ratio. It is important in the photolithographic process to control the refractive index of the photosensitive paste. The composition of this paste for photolithography is based on the $B_2O_3-SiO_2-Al_2O_3$ glass system, including additives of alkali oxides and rare earth oxides. In this work, we investigated the density, structure and refractive index of glasses based on the $B_2O_3-SiO_2-Al_2O_3$ system with the addition of $Li_2O$, $K_2O$, $Na_2O$, CaO, SrO, and MgO. The refractive index of the glasses containing K2O, Na2O and CaO was similar to that of the [BO3] fraction while that of the SrO, MgO and Li2O containing glasses were not correlated with the coordination fraction. The coordination number of the boron atoms was measured by MAS NMR. The refractive index increased with a decrease of molar volume due to the increase in the number of non-bridging oxygen atoms and the polarizability. The lowest refractive index (1.485) in this study was that of the $B_2O_3-SiO_2-Al_2O_3-K_2O$ glass system due to the larger ionic radius of $K^+$. Based on our results, it has been determined that the refractive index of the $B_2O_3-SiO_2-Al_2O_3$ system should be controlled by the addition of alkali oxides and alkali earth oxides for proper formation of the photosensitive paste.

• 한국재료학회지
• /
• 제32권5호
• /
• pp.258-263
• /
• 2022

Porous ceramics have the advantages of low density, low thermal conductivity, and excellent mechanical properties. Among porous ceramic manufacturing methods, the replica template method allows the easy manufacturing of porous filters with the highest porosity and pores of the desired size, but it also has the disadvantage that the resulting filters have low mechanical strength. To overcome this shortcoming, mullite (3Al₂O₃·2SiO₂) whiskers, which have excellent thermal stability and high mechanical strength, were introduced in porous ceramic structure. The mullite whiskers were synthesized using a composition of Al₂O₃, flyash and MoO₃. The morphologies and crystal structures of the mullite whiskers with MoO₃ contents were investigated in detail. When the porous ceramic with mullite whiskers was fabricated using 20 wt% MoO₃ catalyst the most uniform microstructure was obtained, and the mullite whiskers showed the highest aspect ratio of 47.03. The porosity and compressive strength of the fabricated porous ceramic were 82.12 % and 0.83 MPa, respectively.

• 한국콘텐츠학회논문지
• /
• 제17권1호
• /
• pp.634-661
• /
• 2017

본 연구에서는 소설이 성공적으로 영화화하기 위해 필요한 과정에 대해 살펴보고자 한다. 기존의 연구를 통해 소설의 서사구조가 영화라는 매체에 적합한 서사구조로 바뀌어야만 좋은 결과를 만들어낼 수 있음은 익히 알려져있다. 그러나 서사구조의 변경은 성공적인 영화화의 필요조건이기는 하지만 충분조건이 되지는 않는다. 제시된 서사구조에 영화다운 표현을 붙여야 비로소 좋은 결과물이 될 수 있을 것이다. 이미지와 사운드의 구성과 배치를 말하는 영상 언어는 영화적인 표현의 핵심이다. 소설 "내 친구 기리시마 동아리 그만둔대"는 한 챕터 당 한 명의 일인칭 시점으로 고등학교 학생들의 일상을 그려낸 작품이다. 영화 <키리시마가 동아리활동 그만둔대>는 소설의 서사구조를 바꾸어, 전반부는 다양한 인물이 겹쳐보이도록 같은 시간대를 여러 번 반복하여 보여주고, 후반부는 인물들을 학교 옥상으로 모아 하나의 사건을 진행하는 단선적인 구도를 선택하였다. 그리고 이 구조를 표현하기 위해 여러 명을 동시에 표현할 수 있는 가로로 넓은 화면비, 반복되는 사건을 다르게 보여줄 수 있는 구도, 마지막 시퀀스에 힘을 주기 위한 조명과 음악의 대비 등 다양한 영상 언어를 사용하고 있다.

• 항공우주시스템공학회지
• /
• 제14권5호
• /
• pp.1-8
• /
• 2020

구조적 특성 및 공력의 상호작용과 조종면 작동기의 제어 시스템의 영향을 고려한 서보공력탄성 해석을 수행하였다. 공탄성 안정성 해석을 위해서 선행되어야 하는 구조모델의 자유진동 해석은 유한요소 해석 프로그램 MSC Nastran을 사용하였다. 비정상 공기력 계산에 ZAERO를 사용하였다. 비정상 공기력 검증에 Doublet Hybrid Method를 사용하였다. Karpel의 최소상태근사법을 이용하여 주파수 영역의 공기력을 라플라스 영역으로 근사하였다. 공탄성 상태방정식을 구동기의 동역학 상태방정식과 결합하여 서보 공탄성 모델의 상태공간방정식을 구성하였다. 고세장비 모델의 승강타 입력에 따른 안정성 해석을 수행하였다. 근궤적법과 시간적분법을 사용하여 주파수영역과 시간영역에서의 서보공탄성 안정성 해석을 수행하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.433-433
• /
• 2016

Carbon nanotubes (CNT) emitter has widely become an attractive mechanism that draws growing interests for cold cathode field emission. CNT yarns have demonstrated its potential as excellent field emitters. It was demonstrated that a small focal spot size was achieved by manipulating some electrical parameters, such as applied bias voltage at the mesh gate, and electrostatic focal lenses, geometrical parameters, such as axial distances of the anode, and the electrostatic focal lens from the cathode assembly, and the dimension of the opening of the electrostatic lens. Electrical-optics software was used to systematically investigate the behavior of the electron beam trajectory when the aforementioned variables were manipulated. The results of the experiment agree with the theoretical simulation results. Each variable has an individual effect on the electron beam focal spot size impinging on the target anode. An optimum condition of the parameters was obtained producing good quality of X-ray images. Also, MWCNT yarn was investigated for field emission characteristics and its contribution in the X-ray generation. The dry spinning method was used to fabricate MWCNT yarn from super MWCNTs, which was fabricated by MW-PECVD. The MWCNT yarn has a significant field emission capability in both diode and the triode X-ray generation structure compared to a MWCNT. The low-voltage-field emission of the MWCNT yarn can be attributed to the field enhancing effect of the yarn due to its shape and the contribution of the high-aspect-ratio nanotubes that protrude from the sides of the yarn. Observations of the use of filters on the development of X-ray images were also demonstrated. The amount of exposure time of the samples to the X-ray was also manipulated. The MWCNT yarn can be a good candidate for use in the low voltage field emission application of X-ray imaging.

• 천문학논총
• /
• 제32권1호
• /
• pp.359-361
• /
• 2017

We report our research on aluminum mirror optics for future infrared astronomical satellites. For space infrared missions, cooling the whole instrument is crucial to suppress the infrared background and detector noise. In this aspect, aluminum is appropriate for cryogenic optics, because the same material can be used for the whole structure of the instrument including optical components thanks to its excellent machinability, which helps to mitigate optical misalignment at low temperatures. We have fabricated aluminum mirrors with ultra-precision machining and measured the wave front errors (WFEs) of the mirrors with a Fizeau interferometer. Based on the power spectral densities of the WFEs, we confirmed that the surface accuracy of all the mirrors satisfied the requirements for the SPICA Coronagraph Instrument. We then integrated the mirrors into an optical system, and examined the image quality of the system with an optical laser. As a result, the total WFE is estimated to be 33 nm (rms) from the Strehl ratio. This is consistent with the WFEs estimated from the measurement of the individual mirrors.