• Atmosphere
• /
• v.16 no.4
• /
• pp.379-385
• /
• 2006

Meteorological Research Institute (METRI) participates the R&E (Research and Education) program of Korea Science and Engineering Foundation,"Variability of ocean status around Ulleung basin and Dok-do by using ARGO data" as a part of "Carricula development for gifted students" program. From this program, we support students to have an opportunity for handling scientific data with advanced technology and inspire their scientific interests. In this article, we introduce the training processes of this program and the results of data analysis by the students themselves.

• Proceedings of the Korea Contents Association Conference
• /
• 2012.05a
• /
• pp.277-278
• /
• 2012

다양한 라이프스타일에 따른 유비쿼터스 환경에서 디자인 요소와 감성공학을 결합시키는 상호작용 시스템이 요구되고 있으며 많은 연구가 진행되어 왔다. IT융합기술을 이용하여 감성 디자인을 제공하는 것은 제품 서비스 전략의 중요한 요소이다. 본 논문에서는 상황 기반의 감성 분석을 이용한 자전거 디자인 추천 방법론을 제안하였다. 제안된 방법은 자신의 감성에 부합하는 자전거 디자인을 제공함으로써 이를 얻기 위한 시간과 비용을 줄여주고, 원하는 디자인 스타일에 적용하도록 한다. 감성에 따른 자전거 디자인을 추천하기 위해 협력적 필터링을 사용하여 개인화 서비스를 제공한다. 이를 사용자 인터페이스로 구축하여 논리적 타당성과 유효성을 검증하기 위해 실험적인 적용을 시도하고자 한다.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.1
• /
• pp.1-5
• /
• 2008

The output voltage value of AC high voltage source has been usually obtained by multiplying low voltage value measured at both terminals of low voltage resistor by the dividing ratio of the high voltage capacitive divider. From the dividing ratio determined of each 200 kV capacitive divider, we have developed step-up method for measuring the output voltage up to 400 kV using two same type of 200 kV capacitive dividers connected in series. The theoretical dividing ratio of 400 kV capacitive dividers connected in series coincides with that of manufacturer's certification within measurement uncertainty. Thus, this developed step-up method makes it possible to extend the range of output voltage from 200 kV to 400 kV. Furthermore, The dividing ratio of divider under test obtained using this step-up method is consistent with that obtained using one 200 kV high voltage divider within corresponding uncertainties.

• Journal of the Korean Solar Energy Society
• /
• v.21 no.1
• /
• pp.1-10
• /
• 2001

Polycrystalline silicon(poly-Si) films are deposited on low temperature glass substrate by Hot-CVD(HWCVD). The structural properties of the poly-Si films are strongly dependent on the temperature$(T_w)$. The films deposited at high $T_w$ of $2000^{\circ}C$ have superior crystalline proper average lateral grain sizes are larger than $1{\mu}m$ and there are no vertical grain boundaries. The sur of the high $T_w$ samples are naturally textured like pyramid shape. These large grain size and text surface are believed to give high current density when applied to solar cells. However, the poly films are structurally porous and contains high defect density, by which high concentration of C and O resulted within the films by air-penetration after removed from chamber.

• Proceedings of the KIPE Conference
• /
• 2007.11a
• /
• pp.21-23
• /
• 2007

In this paper a high efficiency bi-directional DC-DC converter for hybrid vehicles is proposed. The proposed converter a three-phase half-bridge interleaved ZVS converter, is designed to have high efficiency in the main operation range. The component ratings are calculated, the actual devices are selected, and the efficiency analysis has been performed to determine optimal ZVS range. The input and output current ripples are significantly reduced due to the interleaved operation. The dual loop control for the interleaved three-phase converter is also presented. To confirm the proposed convert ter, The simulation and experimental results are presented.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.570-571
• /
• 2010

To reduce the problem of ecocide, the plating equipment, water treatment system, electrolysis facility in ship need high current high power rectifier. This paper shows entire constitution of the proposed high-current rectifier for electrolysis of seawater, describes a way to design controller and analyzes output characteristic of the rectifier.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.1990-1992
• /
• 1998

A vector control scheme is widely used in AC drive system in these days. In this country for commercializing the system, it has lots of dependency on advanced foreign technology. Therefore we have developed high-performance vector controlled inverter sytems ourselves for two years whose capacitives are 15kW, 30kW and 45kW. For computation of data in high speed DSP is empolyed and by using a IGBT with high switching the current ripple is reduced. Consequently, developed drive systems have high performance and accurary on speed control. There are proved in experimental results.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1166-1168
• /
• 2004

The high frequency series resonant converter has been widely used for the non-contact power supply system with the large air gap and the increased leakage inductance of the non-contact transformer. However. the high frequency series resonant converter has the disadvantages of high voltage gain characteristics in the overall load range due to the large air gap and the circulating magnetizing current. In this paper, unit voltage gain is revealed in the proposed three-level series-parallel resonant converter. The results are verified on the simulation results and the 5kW experimental prototype.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1364-1367
• /
• 2005

In this paper, a novel prototype topology of soft switching PWM controlled high frequency AC power conversion circuit without DC voltage smoothing chemical capacitor filter link from the voltage grid of utility frequency AC power supply source with 60Hz-100V or 60Hz-200V is proposed and introduced for innovative consumer induction heating(IH) boiler applications as hot water producer, steamer and super heated vapor steamer.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06a
• /
• pp.824-829
• /
• 1994

High-frequency and complex vibration ultrasonic wire bonding systems are propsed and their welding characteristic are studied. Ultrasonic wire bonding is used widely for joining thin connecting wire of various electronic devices including IC or LSI. Conventional bonding systems use vibration frequency of 40 or 60 kHz and linear vibration welding tips. Complex vibration welding tip which vibrates in elliptical to circular or rectangular to square in the same or different frequency is effective to join welding specimens in shorter welding time and under smaller vibration amplitude, and furthermore high-frequency systems such as 90, 120, 190 kHz are also significantly effective. High-frequency and complex vibration welding system of 90, 120 and 190 kHz are designed. Welding characteristics of these systems are found very superior than a conventional system. Welding specimens of aluminum wire of 0.1mm diameter are successfully.