• Journal of the Korean Society of School Health
• /
• v.18 no.1
• /
• pp.1-14
• /
• 2005

Purpose: The purpose of this study was to identify the needs of health education in students, their parents and teachers in the elementary, middle and high schools and the current situation of health education class. Method: The subjects of this study were a total of 9450 persons including students, their parents and teachers from 279 schools throughout the country. They were selected through convenient sampling. Data were analyzed through $\chi^2$-test and ANOVA. Result: Students, their parents and teachers replied that 18 dimensions of health education class (DHEC) are necessary. The four DHEC - healthier life style, sex education, mental health and safety education - showed high educational needs in students, their parents, and teachers. High school students had higher educational need of 'symptom management for daily living' than elementary and middle school students. Students, their parents and teachers in elementary school had higher educational needs of 17 DHEC than those in middle and high school. The percentages of schools with health education class taught by health teachers were 99.2%, 75.5% and 66.0% respectively in elementary, middle and high schools. Health education was given mainly using physical education classes at elementary schools, and creative class hours at middle and high schools. In general, health education took 1-3 hours per week at elementary schools, and less than an hour at middle and high schools. Conclusion: Therefore, based on the results, systematic health education class should begin from elementary school to meet the need of health education in students, their parents and teachers, and further study should be made on the number of hours required and the amount of contents of 18 DHEC.

• Journal of Science Education
• /
• v.33 no.2
• /
• pp.165-172
• /
• 2009

Korean 7th national curriculum gave the right to elect the advanced subject such as physics II, chemistry II. Students could elect the subject by their aptitude and interest. But, actually, the choice was constrained by school circumstances such as the number of teacher and the number of class. high school students. We investigated the demand about school science and perception about scientifically specialized high school in which the students could have all advanced science subjects by the survey of 336 middle school students including 148 students in the science education center for the gifted, 220 high school students, and 70 science teachers in capital region. As results of this study, most of the high school opened chemistry and biology advanced subjects, but only 37.1% of them opend physics advanced subject. This constrained students' right of elect the subject by their interest. While most of middle school and high school students normally demanded the more experiment in the class and the easier science content, the students in the science education center for the gifted demanded more science class time. The students who wanted to have science career had very positive recognition of scientifically specialized high school and science teachers agreed to running the scientifically specialized high school.

• Journal of Acupuncture Research
• /
• v.25 no.4
• /
• pp.41-49
• /
• 2008

Objectives : This study was aimed at examining significant curative effects of Cupping therapy on Cerebral infarction patients with hyperlipidemia. Methods : The subjects in this study were fifty-two patients visited or admitted to Dong-seo Oriental Hospital who broke out with Cerebral infarction from March 2007 through February 2008, with high total cholesterol(240mg/$d\ell$ above) or high triglyceride(200mg/$d\ell$ above) or low density lipoprotein(160mg/$d\ell$ above) Before prescription, they were tested for total cholesterol, triglyceride, low density lipoprotein with fasting and were then rescribed the cupping therapy for 4 weeks(take an average ten times), after which they were retested for total cholesterol, triglyceride, low density lipoprotein. Results : 1. In the high total cholesterol group(triglyceride and low density lipoprotein are normal), statistical significance of total cholesterol changes was recognized before and after the treatment. 2. In the high triglyceride group(total cholesterol and low density lipoprotein are normal), statistical significance of triglyceride changes was recognized before and after the treatment. 3. In the high low density lipoprotein group(total cholesterol and triglyceride are normal), statistical significance of triglyceride changes was recognized before and after the treatment. 4. In the high total cholesterol and high triglyceride group(low density lipoprotein is normal), statistical significance of total cholesterol changes was recognized before and after the treatment. But, triglyceride changes was not that. 5. In the high total cholesterol and high low density lipoprotein group(triglyceride is normal), statistical significance of total cholesterol and low density lipoprotein changes were recognized before and after the treatment. 6. In the high triglyceride and high low density lipoprotein group(total cholesterol is normal), statistical significance of triglyceride changes was recognized before and after the treatment. But, low density lipoprotein changes was not that. 7. In the high total cholesterol and high triglyceride and high low density lipoprotein group, statistical significance of total cholesterol changes and low density lipoprotein changes were recognized before and after the treatment. But, triglyceride changes was not that. Conclusions : Cupping therapy decreased total cholesterol in whole hyperlipidemia group including high total cholesterol.

• Journal of Power Electronics
• /
• v.14 no.1
• /
• pp.183-193
• /
• 2014

Due to the requirements for high reliability and accuracy, safety issues for airbag ignition systems need to be studied. In this paper, a high-voltage piezoelectric converter is designed to improve these requirements in airbag ignition systems. The proposed converter includes an inverter drive circuit, a Rosen piezoelectric transformer (PZT), an output circuit and a feedback control circuit. The key components of the high-voltage piezoelectric transformer are analyzed in detail. In addition, the proposed converter system is simulated and implemented for testing. The experimental results show that when the power supply is turned on, the charging time is less than 800ms. Furthermore, the output voltage of this converter can be kept between 2.9kV and 3.1kV, under high-efficiency constant current charging mode and zero-voltage switching conditions.

• Proceedings of the KIPE Conference
• /
• 2007.11a
• /
• pp.133-135
• /
• 2007

This research presented the new zero-current switching pulse width modulation SEPP(Single Ended Push-Pull)high frequency inverter for solving the problem of the zero-current SEPP high frequency inverter circuit which is using widely in the practical application of an induction heating apparatus, the soft switching operation and power control are impossible when the lowest power supply in the zero-current switching pulse width modulation SEPP high frequency inverter. The inverter circuit which is attempted by on-off operation of a switch has the reduction effect of the power loss due to a soft switching and a high frequency switching. And it confirmed that the power regulation is possible continuously from 0.25[kW] until 2.84[kW] in the case the duty rate(D) changes from 0.08 to 0.3 under zero-current switching operating by a dissymmetry pulse width modulating control and the power conversion efficiency comes true the efficiency of 95[%]. Due to the result above, the ZCS PWM SEPP high frequency inverter will be effective as sources of an induction heating apparatus.

• Advances in concrete construction
• /
• v.2 no.2
• /
• pp.145-162
• /
• 2014

In this study, the fracture toughness $K_{IC}$ of high performance concrete (HPC) was determined by conducting three-point bending tests on eighty notched HPC beams of $500mm{\times}100mm{\times}100mm$ at high temperatures up to $450^{\circ}C$ (hot) and in cooled-down states (cold). When the concrete beams exposed to high temperatures for 16 hours, both thermal and hygric equilibriums were generally achieved. $K_{IC}$ for the hot concrete sustained a monotonic decrease tendency with the increasing temperature, with a sudden drop at $105^{\circ}C$. For the cold concrete, $K_{IC}$ sustained a two-stage decrease trend, dropping slowly with the heating temperature up to $150^{\circ}C$ and rapidly thereafter. The fracture energy-based fracture toughness $K_{IC}$' was found to follow similar decrease trends with the heating temperature. The weight loss, the fracture energy and the modulus of rapture were also evaluated.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1086-1092
• /
• 2015

The off-line and on-line partial discharge (PD) in the stator winding of three high-voltage (HV) motors (1,400 HP, 6.6 kV) is measured and analyzed in this paper. The off-line PD is measured at high values between 24,300 ~ 36,100 pC after 18 years of motor operation. Spare replacement motors were not available for testing the degree of deterioration of the stator windings in standstill status. Therefore, on-line periodic analysis was conducted to monitor the trend of PD after installing a ceramic sensor (110 pF, 6.6 kV) in the terminal box for each phase of each motor. In the stator winding of the No.1 and No.2 HV motors, which showed high magnitudes of off-line PD and low magnitudes of on-line PD, defects are expected to appear in the neutral end of the winding. On the contrary, in the stator windings of the No.3 HV motor, which exhibits high off-line and on-line PD magnitude, defects are expected to appear in the terminal end of the winding where a voltage close to the phase voltage is applied.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.442-442
• /
• 2014

Although electrochemical capacitors (ECs), also known as supercapacitors or ultracapacitors, is one of the most promising energy-storage devices because of its high power density, super-high cycle life, and safe operation. We herein report a synthesis of graphene-based flexible films by kneading method. Thus, a device can be readily made by sandwiching a polymer membrane included ionic liquid electrolytes between two identical graphene-based flexible films. Devices made with these electrodes exhibit ultrahigh energy density values while maintaining the high power density and excellent cycle stability of ECs. Moreover, these ECs maintain excellent electrochemical attributes under high mechanical stress and thus hold promise for high-energy, flexible electronics.

• Korean Journal of Plant Resources
• /
• v.22 no.6
• /
• pp.513-517
• /
• 2009

Seed mustard is high in nutrient quality and grows continuously under cold condition. Accordingly, it possessess high potential to bring about more efficient use of land when it is grown as a seasonings crop at paddy field in winter season. Recently, Seed mustard has aroused people‘s interest as a catch crop. The purpose of this trial is to examine productivity and chemical components of seed mustard and to select suitable variety in the southern area of Korea. Seed-mustard cv. Yeongsanpo local showed higher seed yield than any other varieties used in the experiment. It showed relatively high content of Oil, Protein, Ash, Carbo, $P_2O_5$, $K_2O$, Ca and T-N. The heritabilities of all the characters were estimated to be high. Therefore, it was concluded that Youngsanpo local was the most suitable variety with high yield and high nutrient quality at the southern area of Korea.

• Journal of the Korean Ceramic Society
• /
• v.52 no.5
• /
• pp.304-307
• /
• 2015

To reduce the lateral conduction loss of thin-film-processed cathodes, the microstructure of the thin-film cathode is engineered to contain a denser bridging layer in the middle. By doing so, the characteristic crack-like pores that separate the cathode domains in thin-film-processed cathodes and hamper lateral conduction are better connected and, as a result, the sheet resistance of the cathode is effectively reduced by a factor of 5. This induces suppression of the lateral conduction loss and expansion of the effective current collecting area; the cell performance is improved by more than 30%.